1. Sarrera
The Thermaltake TH360 V2 Ultra ARGB Sync/AIO Liquid Cooler is an advanced all-in-one liquid cooling solution designed to provide superior thermal performance for your CPU while offering extensive customization options through its 2.1-inch LCD display and ARGB lighting. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the most out of your cooler.
2. Paketearen edukia
Mesedez, egiaztatu behean zerrendatutako elementu guztiak zure paketean daudela:
- TH360 V2 Ultra ARGB AIO Liquid Cooler (Radiator with integrated pump/water block and tubes)
- Three (3) CT120 ARGB Fans
- Intel Mounting Brackets and Hardware (LGA 2066/2011-3/2011/1700/1200/1156/1155/1151/1150)
- AMD Mounting Brackets and Hardware (AM5/AM4/AM3+/AM3/AM2+/AM2/FM2/FM1)
- Pasta termikoa (aurrez aplikatuta edo hodi batean)
- PWM and ARGB Cables
- User Manual / Instruction Sheet
Note: The unboxing video provided shows a TH280 V2 model, but the contents are generally similar for the TH360 V2, with the primary difference being the radiator size and number of fans.
3. Konfigurazioa eta instalazioa
Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific fan header locations and CPU socket information.
3.1. CPU Compatibility
The TH360 V2 Ultra ARGB is compatible with a wide range of CPU sockets:
- Intel: LGA 2066, 2011-3, 2011, 1700, 1200, 1156, 1155, 1151, 1150
- AMD: AM5, AM4, AM3+, AM3, AM2+, AM2, FM2, FM1
Ensure you use the correct mounting brackets and hardware for your specific CPU socket.
Image: The cooler installed in a PC case, highlighting its compatibility with various CPU platforms.
3.2. Installing the Radiator and Fans
Attach the three CT120 ARGB fans to the radiator using the provided screws. Ensure the fan orientation is correct for your desired airflow (intake or exhaust). Mount the radiator assembly to an available 360mm fan mount location in your PC case (e.g., top, front, or side).
Image: Various radiator sizes, including the 360mm model, demonstrating the slim 27mm design.
3.3. Mounting the Water Block
Prepare the CPU socket by installing the appropriate backplate and standoffs. Apply thermal paste to the CPU if it's not pre-applied on the water block. Carefully place the water block onto the CPU, aligning it with the mounting holes, and secure it with the provided screws. Ensure even pressure for optimal contact.
Image: The water block featuring the 2.1-inch LCD display, which shows real-time liquid temperature.
3.4. Konektatzeko kableak
Connect the pump's power cable to the CPU_FAN or AIO_PUMP header on your motherboard. Connect the fan PWM cables to available fan headers. Connect the ARGB cables from the fans and water block to your motherboard's 5V ARGB header or a compatible ARGB controller. Ensure all connections are secure to prevent accidental disconnections.
4. Funtzionamendu-argibideak
The TH360 V2 Ultra ARGB cooler is controlled and customized via the TT RGB Plus 2.0 software.
4.1. LCD Display Customization
The 2.1-inch LCD display on the water block can be customized to show various information or media:
- Denbora errealeko informazioa: Monitor CPU temperature, liquid temperature, fan RPM, and more.
- Custom Media: Upload JPG, GIF, PNG images, or MP4, MOV, AVI video files.
- Time and Weather: Display local time and weather information.
Use the TT RGB Plus 2.0 software to manage display content, brightness, and orientation. The software allows for extensive personalization of start-up and standby screens.
Image: The TT RGB Plus 2.0 software interface, demonstrating the customization options for the LCD display.
4.2. Fan and Pump Control
The CT120 ARGB fans and the pump are PWM controlled, allowing for dynamic speed adjustments based on CPU temperature. You can configure fan curves and pump speeds within the TT RGB Plus 2.0 software or through your motherboard's BIOS/software for optimal balance between cooling performance and noise levels.
5. Mantentzea
Mantentze-lan erregularrak zure hozkailu likidoaren iraupena eta errendimendu optimoa bermatzen laguntzen du.
- Hautsa kentzea: Periodically clean the radiator fins and fan blades using compressed air to remove dust buildup. This improves airflow and cooling efficiency.
- Hodien ikuskapena: Check the tubes for any kinks, leaks, or signs of wear. Ensure they are not pressing against other components.
- Water Block Contact: While the system is closed-loop and does not require coolant refills, ensure the water block remains securely mounted to the CPU for proper thermal transfer.
- Software eguneraketak: Keep the TT RGB Plus 2.0 software updated to the latest version for new features, bug fixes, and improved compatibility.
6. Arazoak
If you encounter issues with your Thermaltake TH360 V2 Ultra ARGB cooler, refer to the table below for common problems and solutions.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| CPUaren tenperatura altuak | Poor water block contact, insufficient thermal paste, dust buildup on radiator, incorrect fan orientation, pump failure. | Re-seat water block, reapply thermal paste, clean radiator/fans, check fan direction, verify pump operation (listen for hum, check software RPM). |
| Fans Not Spinning / ARGB Not Lighting Up | Loose cable connections, incorrect header connection, software/driver issue. | Check all PWM and ARGB cable connections, ensure connected to correct motherboard headers (5V ARGB, not 12V RGB), reinstall TT RGB Plus 2.0 software. |
| LCD pantaila ez dabil | Loose USB connection, software issue, power delivery problem. | Ensure Micro USB to USB (9PIN) cable is securely connected, restart TT RGB Plus 2.0 software, check power connections to the pump. |
| Zarata ezohikoak (gurgullak, txistuak) | Air bubbles in the loop (gurgling), pump issue (whining). | Orient radiator higher than pump to allow air to collect in radiator, gently tilt case to dislodge bubbles. If whining persists, contact support. |
7. Zehaztapenak
Detailed technical specifications for the Thermaltake TH360 V2 Ultra ARGB Liquid Cooler:
| Osagaia | Zehaztapena |
|---|---|
| Modelo zenbakia | CL-W384-PL12SW-A |
| Erradiadoreen Neurriak | 396 x 120 x 27 mm (15.59"L x 1.06"Z x 4.72"A) |
| Erradiadorea Materiala | Aluminioa |
| Ur-blokearen materiala | Kobrea |
| Hodiaren Luzera | 460 mm |
| Tube Materiala | Kautxua |
| Fan dimentsioak | 120 x 120 x 25 mm |
| Fan Abiadura | PWM 500~1800 R.P.M |
| Fan Aire Fluxua | 57.05 CFM (one fan) |
| Haizagailuaren presio estatikoa | 2.23mm-H2O (one fan) |
| Haizagailuaren zarata-maila | 25.8 dB-A |
| Ponpa motorraren abiadura | PWM 1500 ~ 3300 RPM |
| CPU Display Type | 2.1" TFT-LCD |
| CPU Display Resolution | 480x480 (RGB) px |
| Sistemaren bateragarritasuna | Windows 10/11 |
8. Bermea eta Laguntza
Thermaltake products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Thermaltake webwebgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzura. Gorde erosketaren frogagiria berme-erreklamazioetarako.
Laguntza gehiago lortzeko, bisitatu Thermaltake Store on Amazon.