Sena 10S Motozikleta Bluetooth Aurikularren Komunikazio Sistemaren Erabiltzaile Eskuliburua

1. Produktua amaitu daview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Ezaugarri nagusiak:

• Bluetooth 4.1 eta Universal Intercom bateragarritasun zabalerako.
• Kristalezko HD audioa Zarata Kontrol Aurreratuarekin soinu-kalitate bikaina lortzeko.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

1.1. irudia: Aurrealdea view of the Sena 10S Motorcycle Bluetooth Headset.

2. Paketearen edukia

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Bozgorailu multzoa
• Boom Mikrofonoa
• Kablezko Mikrofonoa
• Cl muntatzeaamp Kit
• USB elikadura eta datu kablea
• Audio-kablea
• Bozgorailuentzako belkro-kosxinak
• Mikrofono belakiak

Figure 2.1: All components included in the Sena 10S package.

3. Konfigurazioa eta instalazioa

3.1 Gailua kargatzea

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

3.1. irudia: Aldea view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Askatu claren atzealdean dauden torlojuakamp unitatea.
2. Irristatu clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Funtzionamendu-argibideak

4.1 Piztu/Itzali

• Piztu: Press and hold the Phone Button and the Jog Dial for 1 second.
• Itzali: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Bolumen kontrola

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.

4.3 Bluetooth parekatzea (telefono adimenduna)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Interfono bidezko komunikazioa

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Interfonoaren hasiera/amaiera: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Erreproduzitu/Pausatu musika: Eduki sakatuta Jog Dial 1 segundoz.
• Deia erantzun/amaitu: Sakatu Telefonoaren botoia.
• Ahots bidezko markaketa: Luze sakatu telefonoaren botoia 3 segundoz.

5. Mantentzea eta Zainketa

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Mantendu gailua lehor. Hezetasunak barneko zirkuituak kaltetu ditzake.
• Ez erabili produktu kimiko gogorrak, disolbatzaileak edo garbigarri indartsuak gailua garbitzeko.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Gorde gailua leku fresko eta lehor batean erabiltzen ez duzunean.
• Kargatu bateria aldizka, erabiltzen ez baduzu ere, bateriaren osasuna mantentzeko.

6. Arazoak

If you encounter issues with your Sena 10S, try the following steps:

• Potentziarik gabe: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Soinurik ez/Bolumen baxua: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Interfonoa ez da konektatzen: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Bluetooth deskonexioa: Ensure your paired device is within range. Try re-pairing the device.
• Gailua berrezarri: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Zehaztapen Teknikoak

8. Produktuaren bideo ofiziala

9. Bermea eta Laguntza

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.