Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler Instruction Manual

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler. This all-in-one (AIO) water cooling system is designed to deliver efficient thermal performance for your CPU, featuring a dual-chamber pump, pre-installed SickleFlow 120 Edge fans, and Addressable Gen 2 RGB lighting.

The MasterLiquid Atmos 360 is compatible with a wide range of Intel LGA (1700/1200/1151/1150/1155/1156) and AMD (AM5/AM4) sockets.

Image: The Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler, showcasing its radiator, three RGB fans, and illuminated pump head.

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak paketean daudela:

• 360mm Radiator with pre-installed SickleFlow 120 Edge Fans
• CPU Water Block/Pump Unit
• Mounting Hardware for Intel LGA 1700/1200/115x sockets
• Mounting Hardware for AMD AM5/AM4 sockets
• Pasta Termikoa
• ARGB Gen 2 Controller (if included)
• Various Cables (PWM fan cables, ARGB cables)
• Erabiltzailearen eskuliburua

Irudia: Osoa view of all included components for the MasterLiquid Atmos 360, including the radiator, fans, pump, mounting brackets, and accessories.

Konfigurazioa eta Instalazioa

Follow these steps carefully to install your liquid cooler. Refer to your motherboard and PC case manuals for specific guidance on component placement and cable routing.

1. Prestatu CPU Socket-a

• Identify your CPU socket type (Intel LGA or AMD AM).
• Install the appropriate backplate (for Intel) or retention clips (for AMD) as per the included hardware guide.
• Garbitu CPUaren gainazala isopropil alkoholarekin hondakinak kentzeko.

2. Aplikatu pasta termikoa

• Apply a small, pea-sized amount of the included thermal paste to the center of your CPU's integrated heat spreader (IHS).
• Do not spread the paste manually; the pressure from the cold plate will distribute it evenly.

3. Erradiadorea eta haizagailuak instalatu

• Determine the optimal mounting location for the 360mm radiator in your PC case (typically top or front).
• Secure the radiator to the case using the provided screws. The SickleFlow Edge fans are pre-installed on the radiator for convenience.

4. Mount the Pump/Cold Plate

• Attach the correct mounting brackets to the pump unit for your CPU socket.
• Carefully place the pump/cold plate assembly onto the CPU, aligning the mounting holes.
• Secure the pump unit with the appropriate screws, tightening them in a diagonal pattern until snug. Do not overtighten.

5. Konektatu kableak

• Konektatu ponparen 3 pineko elikatze-kablea zure plaka basean dagoen CPU_FAN edo AIO_PUMP goiburu erabilgarri batera.
• Connect the PWM fan cables from the SickleFlow Edge fans to the CPU_FAN or other available fan headers on your motherboard. It is recommended to connect them to a single header using a splitter if necessary, to ensure synchronized fan speed control.
• Connect the ARGB cables from the pump and fans to an Addressable Gen 2 RGB header on your motherboard (5V-D-G) or to the included ARGB controller.

Image: The assembled MasterLiquid Atmos 360, showing the radiator, fans, and pump unit connected by tubing.

Funtzionamendu-argibideak

Hasierako piztea

After installation, power on your system. The pump and fans should begin operating. Monitor your CPU temperatures using system monitoring software to ensure proper function.

RGB argiaren kontrola

The MasterLiquid Atmos 360 features Addressable Gen 2 RGB lighting on both the pump and fans. You can control the lighting effects through several methods:

• Plakaren sinkronizazioa: If connected to a compatible ARGB motherboard header, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting.
• Included ARGB Controller: If an ARGB controller is included, use its physical buttons to cycle through pre-set lighting modes and colors.
• Cooler Master MasterCTRL/MasterPlus Software: Download and install Cooler Master's MasterCTRL or MasterPlus software for advanced customization of lighting effects and device performance.

Irudia: Xehetasun zehatza view of the MasterLiquid Atmos pump head, showcasing its unique design and customizable RGB illumination.

Fan Abiadura Kontrola

The SickleFlow Edge fans are PWM (Pulse Width Modulation) controlled. Their speed can be managed via your motherboard's BIOS/UEFI settings or through motherboard-specific software. Adjust fan curves to balance cooling performance and noise levels according to your preferences.

Mantentzea

Mantentze-lan erregularrak zure hozkailu likidoaren errendimendu optimoa eta iraupena bermatzen laguntzen du.

• Hautsa garbitzea: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• Ikus-ikuskapena: Occasionally inspect the tubing and connections for any signs of leaks or damage. While AIO coolers are sealed systems, a quick visual check can prevent potential issues.
• Software eguneraketak: Keep your Cooler Master MasterCTRL/MasterPlus software and motherboard BIOS/UEFI updated to ensure compatibility and access to the latest features and performance optimizations.

Arazoak konpontzea

If you encounter issues with your MasterLiquid Atmos 360, refer to the following common troubleshooting steps:

CPUaren tenperatura altuak

• Check Pump Connection: Ensure the pump's power cable is securely connected to the correct motherboard header (CPU_FAN or AIO_PUMP) and receiving power.
• Egiaztatu haizagailuaren funtzionamendua: Confirm that all radiator fans are spinning. Check their connections to the motherboard or fan controller.
• Pasta termikoa: Ensure thermal paste was applied correctly and the cold plate has good contact with the CPU. Re-apply if necessary.
• Aire-fluxua: Check your PC case's overall airflow. Ensure radiator fans are oriented correctly for intake or exhaust as desired.

RGB argia ez dabil

• ARGB konexioa: Verify that the ARGB cables are correctly connected to a 5V-D-G header on your motherboard or the ARGB controller. Ensure it is not connected to a 12V RGB header, which can damage the LEDs.
• Softwarea: Check your motherboard's RGB software or Cooler Master's MasterCTRL/MasterPlus software for lighting settings. Ensure the lighting is enabled and configured.
• Kontrolagailuaren potentzia: If using an external ARGB controller, ensure it is receiving power (usually via SATA power connector).

Ponpa-zarata ezohikoa

• Aire-burbuilak: New AIOs may have some air bubbles that can cause gurgling noises initially. These usually dissipate within a few hours of operation. Gently tilt your PC case to help move air bubbles to the radiator.
• Muntaketa: Ziurtatu ponpa ondo muntatuta dagoela eta ez duela beste osagaien kontra bibratzen.

If problems persist, please contact Cooler Master customer support.

Zehaztapenak

Bermearen informazioa

The Cooler Master MasterLiquid Atmos 360 Black CPU Liquid Cooler comes with a 5 urteko bermea erosketa-datatik aurrera. Berme honek ohiko erabileran materialen eta eskulanen akatsak estaltzen ditu.

For warranty claims or detailed terms and conditions, please retain your proof of purchase and visit the official Cooler Master webwebgunean edo jarri harremanetan bere bezeroarentzako laguntzarekin.

Laguntza

For further assistance, technical support, or to download the latest software and drivers, please visit the official Cooler Master webgunea:

www.coolermaster.com

You may also find helpful resources, FAQs, and community forums on their support pages.