Fafeicy JLS-E-2S CNC VFD Frequency Inverter (0.4KW) User Manual

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of the Fafeicy JLS-E-2S CNC VFD Frequency Inverter. This device is designed to control the speed and torque of AC motors by varying the frequency and voltage of the power supply. It is suitable for various industrial applications, including assembly lines, conveyor belts, spindle motors, drills, CNC machines, lathes, milling machines, pumps, fans, and compressors.

Produktua erabili aurretik, mesedez, irakurri arretaz eskuliburu hau, funtzionamendu segurua eta eraginkorra bermatzeko.

2. Segurtasun informazioa

OHARRA: Risk of electrical shock. Always read the user manual before operation. Wait at least 10 minutes after removing power before servicing the unit to allow capacitors to discharge.

• Ensure all wiring is performed by qualified personnel in accordance with local electrical codes and regulations.
• Egiaztatu sarrerako boltage matches the specifications of the VFD.
• Do not operate the VFD with damaged cables or if the enclosure is open.
• Always disconnect power before making any connections, disconnections, or performing maintenance.
• Ensure proper grounding of the VFD and the motor.
• Keep the VFD away from water, moisture, direct sunlight, and corrosive environments.
• Ensure adequate ventilation around the VFD to prevent overheating.

3. Produktua amaitu daview

The Fafeicy JLS-E-2S VFD is a compact and robust frequency inverter designed for precise motor control. It features a user-friendly control panel and clearly labeled terminals for easy installation.

3.1 Osagai nagusiak

• Kontrol-panela: For setting parameters and operating the VFD.
• Input Terminals (L1, L2): For single-phase 220V power supply.
• Output Terminals (U, V, W): For connecting to the motor.
• Braking Terminals (P, PB): For connecting an optional braking resistor.
• Hozte haizagailua: Located at the bottom for heat dissipation.

3.1. irudia: Orokorrean view of the Fafeicy JLS-E-2S VFD Frequency Inverter.

3.2. irudia: Goikoa view of the VFD with the terminal cover open, showing the wiring terminals. This design provides strong anti-interference ability and stable, reliable performance.

3.3. irudia: Aurrealdea view of the VFD, highlighting the control panel and the safety warning label.

4. Zehaztapenak

5. Konfigurazioa

5.1 Muntaketa

Mount the VFD securely in a well-ventilated area, away from direct heat sources, moisture, and excessive dust. Ensure there is sufficient space around the unit for proper airflow, especially around the cooling fan at the bottom.

5.1. irudia: Atzealdea view of the VFD, illustrating the mounting points for secure installation.

5.2 Kableatua

Before wiring, ensure the main power supply is disconnected. Refer to the terminal diagram on the unit and in this manual.

1. Input Power (L1, L2): Connect the single-phase 220V AC power supply to terminals L1 and L2.
2. Motor Connection (U, V, W): Connect the three-phase motor leads to terminals U, V, and W. Ensure correct phase sequence for desired motor rotation.
3. Lurreratzea: Connect the ground terminal of the VFD to a reliable earth ground.
4. Braking Resistor (P, PB - Optional): If a braking resistor is used, connect it to terminals P and PB. Consult the braking resistor's manual for specific wiring.
5. Control Terminals (AO, X1, X2, X3, TC, TA, TB, etc.): These terminals are for external control signals (e.g., start/stop, speed reference, fault output). Refer to the detailed wiring diagram on the unit or in the full product manual for specific functions.

5.2. irudia: hurbileko planoa view of the main power and motor wiring terminals (L1, L2, P, PB, U, V, W).

5.3. irudia: Angeludun view showing both the power terminals and the smaller control terminals for external connections.

6. Funtzionamendu-argibideak

6.1 Kontrol panelaren funtzioak

6.1. irudia: hurbileko planoa view VFD kontrol panelarena.

• KORRIKA botoia: Motorra abiarazten du.
• STOP/BERREZARRI botoia: Stops the motor or resets fault conditions.
• PRG (Program) Button: Enters or exits the parameter setting mode.
• MF (Multi-Function) Button: Moduaren arabera hainbat funtziotarako erabiltzen da.
• ENTER botoia: Confirms parameter settings or selections.
• Gora/Behera gezi-botoiak: Navigate through menus or adjust parameter values.
• Botoi birakaria: Adjusts frequency or other selected parameters.
• Bistaratzeko pantaila: Shows current frequency, output current, voltage, or parameter codes.

6.2 Oinarrizko funtzionamendua

1. Piztu: After ensuring all connections are secure, apply power to the VFD. The display will light up.
2. Ezarri maiztasuna: Use the rotary knob to set the desired output frequency. The display will show the set frequency.
3. Abiarazi motorra: Sakatu KORRIKA button. The motor will start and accelerate to the set frequency.
4. Motorra gelditu: Sakatu STOP / RESET botoia. Motorra moteldu eta gelditu egingo da.
5. Adjust Speed During Operation: While the motor is running, you can adjust the frequency using the rotary knob to change the motor speed.

6.3 Parametroen ezarpenak

The VFD has various parameters that can be adjusted to customize its operation for specific applications. To access and modify parameters:

1. Sakatu PRG button to enter parameter setting mode.
2. Use the Up/Down arrow buttons to navigate through parameter groups and individual parameters.
3. Sakatu SARTU parametro bat hautatzeko.
4. Use the Up/Down arrow buttons or the rotary knob to change the parameter value.
5. Sakatu SARTU berriro balio berria gordetzeko.
6. Sakatu PRG parametroak ezartzeko modutik irteteko.

Refer to the comprehensive parameter list in the full product manual for detailed descriptions of each parameter and their recommended settings.

7. Mantentzea

Mantentze-lan erregularrak zure VFD-aren iraupena eta funtzionamendu fidagarria bermatzen ditu.

• Garbiketa: Periodically clean the exterior of the VFD with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure the cooling fan and vents are free from dust and debris to maintain proper airflow.
• Ikuskapena: Regularly inspect all wiring connections for tightness and signs of wear or damage. Check for any unusual noises or odors during operation.
• Ingurumena: Ziurtatu funtzionamendu-ingurunea zehaztutako tenperatura eta hezetasun tarteen barruan mantentzen dela.

OHARRA: Always disconnect power and wait 10 minutes before performing any cleaning or inspection inside the VFD to avoid electrical shock.

8. Arazoak

This section provides solutions to common issues. For more complex problems, contact technical support.

9. Bermea eta laguntza

Bermeari buruzko informazioa, laguntza teknikoa edo zerbitzu-kontsultak egiteko, jarri harremanetan zure saltzailearekin edo fabrikatzailearekin zuzenean. Gorde erosketa-agiria erosketaren frogagiri gisa.