Retro-Bit SEGA Saturn PRO 2.4GHz Wireless Pro Controller User Manual

1. Sarrera

This manual provides detailed instructions for the setup, operation, and maintenance of your Retro-Bit SEGA Saturn PRO 2.4GHz Wireless Pro Controller. This controller is designed to enhance your gaming experience across multiple platforms, including SEGA Saturn, PC, Mac, and Nintendo Switch, offering modern features while retaining the classic feel.

2. Produktuaren ezaugarriak

• Anitzeko bateragarritasuna: Includes dedicated SEGA Saturn and USB wireless receivers for broad compatibility.
• Zehaztasun kontrolak: Features dual Hall Effect analog sticks for enhanced durability and precise input.
• Funtzio aurreratua: Incorporates dual analog rumble motors for immersive feedback, four shoulder buttons, and dedicated Home and Select buttons.
• Bateria kargagarria: Equipped with a built-in 500 mAh battery and a USB-C fast charging port. A 3ft/1m USB-C to USB charge cable is included.
• 3D Control Pad Support: Enabled by macro via the console receiver for compatible games.

3. Paketearen edukia

• Retro-Bit SEGA Saturn PRO 2.4GHz Wireless Pro Controller
• SEGA Saturn 2.4GHz Wireless Receiver
• USB 2.4GHz haririk gabeko hargailua
• USB-C to USB Charge Cable (3ft/1m)

Image: The included SEGA Saturn and USB wireless receivers.

4. Kontrolatzailearen diseinua

The Retro-Bit SEGA Saturn PRO controller features a familiar layout with modern enhancements. Below is a general overview:

Irudia: Aurrealdea view of the Retro-Bit SEGA Saturn PRO Wireless Controller.

• D-Pad: Norabideko sarrera.
• Action Buttons (A, B, C, X, Y, Z): Standard gaming inputs.
• Makila analogikoak: Dual Hall Effect analog sticks for precise 3D movement.
• Hasi botoia: Game start/pause.
• Hasierako botoia: Sistemaren menurako sarbidea.
• Hautatu botoia: Additional game functions.
• Shoulder Buttons (L, R, ZL, ZR): Four shoulder buttons for expanded control.
• USB-C ataka: Kontrolatzailea kargatzeko.

Irudia: Goian view highlighting the shoulder buttons and USB-C charging port.

5. Konfigurazioa eta konexioa

Your controller comes with two receivers for different platforms.

5.1. Connecting to SEGA Saturn Console

1. Insert the SEGA Saturn 2.4GHz Wireless Receiver into a controller port on your SEGA Saturn console.
2. Power on your SEGA Saturn console.
3. Turn on the Retro-Bit controller. The controller should automatically pair with the receiver. An indicator light on both the controller and receiver will confirm a successful connection.

5.2. Connecting to PC, Mac, or Nintendo Switch

1. Insert the USB 2.4GHz Wireless Receiver into an available USB port on your PC, Mac, or Nintendo Switch dock.
2. Piztu zure gailua.
3. Turn on the Retro-Bit controller. The controller should automatically pair with the USB receiver. An indicator light on both the controller and receiver will confirm a successful connection.
4. For PC/Mac, ensure necessary drivers are installed if prompted by your operating system.

Image: The controller is compatible with USB-enabled devices via the USB receiver and SEGA Saturn consoles via the console receiver.

6. Kontrolatzailea kargatzea

The controller features a built-in 500 mAh rechargeable Li-ion battery. To charge:

1. Connect the included USB-C to USB charge cable to the USB-C port on the front of the controller.
2. Konektatu kablearen beste muturra USB ataka batera (adibidez, ordenagailura, USB hormako egokitzailera).
3. The charging indicator lights on the controller will show the charging status. Once fully charged, the lights will indicate completion or turn off.

Image: The controller is rechargeable via its USB-C port.

7. Firmware eguneratzea

It is highly recommended to update the controller's firmware before initial use to ensure optimal performance and access to the latest features.

Instructions for the firmware update can be found on the official Retro-Bit webgunea Laguntza atalean.

Bisitatu: retro-bit.com/support

Image: Firmware update information, directing users to the Retro-Bit support webgunea.

8. Arazoak

• Kontrolatzailea ez da konektatzen: Ensure both the controller and receiver are powered on and within range. Check that the correct receiver is used for the intended console/device. Try re-pairing by pressing the sync buttons on both the controller and receiver.
• Sarrerako atzerapena edo deskonexioak: Ensure there are no major obstructions or sources of interference (e.g., other 2.4GHz devices, large metal objects) between the controller and receiver. Ensure the controller is fully charged.
• Analog Stick Dead Zone/Inaccuracy: If experiencing issues with analog stick responsiveness or large dead zones, ensure the controller's firmware is updated to the latest version. On PC, you may need to calibrate the controller through your operating system's game controller settings.
• Kontrolatzailea ez da kargatzen: Verify the USB-C cable is securely connected to both the controller and a powered USB source. Try a different USB port or cable.

9. Zehaztapenak

10. Zainketa eta Mantentzea

• Keep the controller and receivers dry. Avoid exposure to moisture or extreme temperatures.
• Garbitu kontrolatzailea oihal leun eta lehor batekin. Ez erabili produktu kimiko gogorrik edo material urratzailerik.
• Gorde kontrolatzailea leku seguru batean erabiltzen ez duzunean, kalteak saihesteko.
• Charge the controller regularly to maintain battery health, even if not used frequently.

11. Produktuaren bideo ofiziala

12. Laguntza eta Bermea

For technical support, troubleshooting assistance, or warranty information, please visit the official Retro-Bit support webgunea:

Webgunea: retro-bit.com/support

Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.