Jebao PL1LED4S Underwater Fountain Pond Submersible LED Light Set (Set of 4) - User Manual

1. Sarrera

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Jebao PL1LED4S Underwater Fountain Pond Submersible LED Light Set. This set includes four compact, low-voltage LED lights designed for illuminating ponds, fountains, and other outdoor water features. Each light features a single LED source for wide, evenly dispersed beams and can be rotated 120 degrees horizontally for optimal light direction. The system includes an outdoor weather-proof 12V AC UL approval transformer and a photocell sensor for automatic operation.

2. Segurtasun informazioa

Mesedez, irakurri arretaz segurtasun-jarraibide guztiak produktua instalatu edo erabili aurretik. Argibide hauek ez jarraitzen badituzu, deskarga elektrikoak, sua edo lesio larriak gerta daitezke.

• Segurtasun elektrikoa: Ensure the power source matches the requirements specified on the transformer. Always disconnect power before performing any installation, maintenance, or troubleshooting. The transformer is outdoor weather-proof, but avoid submerging it.
• Ur-murgiltzea: The LED lights are designed for submersible use. Ensure all connections are secure and watertight before placing lights in water.
• Kableen kudeaketa: Route power cords to prevent tripping hazards and protect them from damage. Do not run cords under heavy objects or through sharp edges.
• Tenperatura: Do not operate the lights in temperatures outside the recommended range.
• Haurrak eta maskotak: Mantendu ontziratzeko materialak eta osagai txikiak haurren eta animalien eskura ez dauden lekuetan.
• Instalazio profesionala: Instalazio prozesuaren edozein atalen inguruan ziur ez bazaude, kontsultatu elektrizista kualifikatu bati.

3. Paketearen edukia

Egiaztatu behean zerrendatutako osagai guztiak zure paketean daudela:

• 4 x Jebao Submersible LED Lights
• 1 x Outdoor Weather-Proof 12V AC UL Approval Transformer
• 1 x Photocell Sensor
• 4 x Red Color Lenses
• 4 x Green Color Lenses
• 4 x Yellow Color Lenses
• 4 x Blue Color Lenses
• Argibide eskuliburua (dokumentu hau)

3.1. irudia: Amaituview of the Jebao PL1LED4S LED light kit, showing four submersible lights, the transformer, photocell sensor, and various colored lenses.

4. Konfigurazioa eta instalazioa

Follow these steps to properly install your Jebao LED light set:

4.1. Pre-Installation Check and O-Ring Preparation

Before submerging the lights, it is highly recommended to prepare the O-rings to ensure a watertight seal and prevent leaks. This step is crucial for the longevity of your lights.

1. Access O-Ring: Carefully unscrew or unlock the cap from the lens of each light fixture. You will find an O-ring inside.
2. Apply Silicone Grease: Remove the O-ring. Apply a small amount of high-grade silicone grease (e.g., dielectric grease or plumbing grease for O-rings) to your fingers and work it all the way around the O-ring, ensuring it is fully covered. Avoid using excessive amounts and try not to get grease on the lens itself.
3. Berriz muntatu: Place the greased O-ring back into its slot. Carefully place the desired colored lens (or no lens) and ensure it is properly seated. Screw the cap back on until it locks securely. The grease allows the O-ring to slide smoothly and create a proper seal as the cap is tightened, preventing binding and potential leaks.

4.1. irudia: Plano hurbila view of one Jebao PL1LED4S LED light, showing the lens and housing. This is where the O-ring is located for sealing.

4.2. Wiring Configuration

The four light fixtures are pre-wired in a specific configuration:

• A 16-foot lead wire connects from the transformer to the first light fixture.
• Subsequent fixtures are connected by 3-foot wires between each light.

Image 4.2: The four Jebao PL1LED4S LED lights connected by their wiring, illustrating the series configuration.

4.3. Kokapena eta instalazioa

1. Posizio-argiak: Place the lights in your pond, fountain, or water feature. The weighted base allows for stable placement in shallow water or on surfaces. The lights can be rotated 120 degrees horizontally to direct the beam as desired.
2. Attach Color Lenses (Optional): If desired, attach one of the provided red, green, yellow, or blue colored lenses to each light for an added dramatic effect. Ensure the lens is securely fastened.
3. Photocell Sensor Placement: Position the photocell sensor in an area that receives ambient light, but is not directly illuminated by the LED lights themselves, to ensure accurate dusk-to-dawn operation.
4. Konektatu transformadorea: Connect the light system to the outdoor weather-proof 12V AC UL approval transformer.
5. Piztu: Plug the transformer into a suitable outdoor electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.

5. Funtzionamendua

The Jebao PL1LED4S LED Light Set operates automatically using its integrated photocell sensor.

• Piztu/Itzali automatikoa: The photocell sensor detects ambient light levels. When it gets dark (dusk), the lights will automatically turn on. When it becomes light again (dawn), the lights will automatically turn off.
• Eskuz gainditzea: There is no manual override switch for the photocell. To turn the lights off during daylight hours, you must unplug the transformer from the power outlet.
• Argiaren norabidea doitzea: The light fixtures can be manually rotated 120 degrees horizontally to adjust the direction of the light beam. Ensure the power is disconnected before making adjustments to lights submerged in water.

6. Mantentzea

Regular maintenance ensures optimal performance and extends the lifespan of your LED lights.

• Lenteak garbitzea: Periodically clean the light lenses to remove algae, mineral deposits, or debris that may accumulate and reduce light output. Disconnect power before cleaning. Use a soft cloth and mild, non-abrasive cleaner.
• Kableen ikuskapena: Regularly inspect power cords and connections for any signs of wear, damage, or fraying. Replace damaged components immediately.
• O-ringen ikuskapena: Annually inspect the O-rings for cracks or degradation. Re-grease or replace them as necessary to maintain a watertight seal.
• Neguan egitea: In regions with freezing temperatures, it is recommended to remove the submersible lights from the water during winter to prevent damage from ice expansion. Store them in a dry, protected area.

7. Arazoak

If you encounter issues with your Jebao LED light set, refer to the following common problems and solutions:

8. Zehaztapenak

Technical details for the Jebao PL1LED4S Underwater Fountain Pond Submersible LED Light Set:

8.1 irudia: Dimentsiokoa view of a single Jebao PL1LED4S LED light, indicating its 2-inch length, 2-inch width, and 3-inch height.

9. Bermea eta laguntza

Bermearen informazioa: This Jebao PL1LED4S LED Light Set is covered by a 180-day limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, improper installation, or neglect.

Bezeroarentzako laguntza: For technical assistance, warranty claims, or replacement parts, please contact Jebao customer support through the retailer where the product was purchased or visit the official Jebao website for contact information. Please have your model number (PL1LED4S) and proof of purchase ready when contacting support.