Huepar B03CG Pro & LR-5RG

Huepar 3 x 360 Laser Level (B03CG Pro) & LR-5RG Laser Detector User Manual

Model: B03CG Pro & LR-5RG

1. Sarrera

This manual provides detailed instructions for the safe and effective operation, setup, maintenance, and troubleshooting of your Huepar 3 x 360 Laser Level (B03CG Pro) and Huepar LR-5RG Laser Detector. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

Paketearen edukia

1 x Huepar B03CG Pro Laser Level
1 x Rechargeable Lithium Battery 3.7V / 5200mAh
1 x Type-C Power Cord
1 x korronte egokitzailea
1 x 360° Magnetic Pivoting Base
1 x Green Laser Target Plate
1 x Multilingual User Manual
1 x Zorro gogorra
1 x Huepar LR-5RG Digital Laser Detector
1 x Heavy-duty clamp
2 x AA Batteries (for LR-5RG)

2. Segurtasun informazioa

Always observe the following safety precautions to reduce the risk of injury and damage to the product.

Laser klasea 2: Produktu honek 2. klaseko laser erradiazioa igortzen du. Ez begiratu zuzenean laser izpiari. Saihestu begietan zuzenean esposizioa.
Do not disassemble, modify, or attempt to repair the laser level or detector. This may cause serious injury and will void the warranty.
Mantendu gailua haurren eskura.
Erabili zehaztutako korronte-egokitzailea eta bateria soilik.
Ez erabili gailua leherketa-arriskuetan, hala nola likido, gas edo hauts sukoien aurrean.
Protect the device from extreme temperatures, strong vibrations, and direct sunlight.

3. Produktua amaitu daview

Huepar B03CG Pro Laser Level

The Huepar B03CG Pro is a 3 x 360° green laser level designed for precise leveling and alignment tasks. It features a bright green laser for enhanced visibility.

3 x 360° Laser Lines: One horizontal and two vertical 360° laser planes for full room coverage.
Green Laser Technology: Utilizes bright Osram's green laser unit for higher stability and visibility, up to 85 feet (300LUX).
Norberaren mailaketa modua: Automatically levels within ±4° when the pendulum is unlocked.
Eskuzko/Inklinazio modua: Allows locking lines for use at any angle when the pendulum is locked.
Kanpoko Pultsu Modua: Extends working range up to 200 feet with a compatible laser detector.
Diseinu iraunkorra: Covered by TPR soft rubber for protection, IP54 water/dust proof.

Huepar 3x360 Laser Level and LR-5RG Laser Detector — Figure 3.1: Huepar B03CG Pro Laser Level and LR-5RG Laser Detector. The laser level projects three 360-degree green laser lines, and the detector is used to find the laser line at greater distances or in bright conditions.

Huepar LR-5RG Laser Detector

The Huepar LR-5RG is a digital laser detector designed to work with Huepar pulse line lasers, extending their working range.

Bateragarritasuna: Detects Red and Green pulse laser beams.
Lanerako distantzia: Up to 200 feet (typical) depending on light source.
Large Reception Window: 2 inches for quick and accurate laser plane location.
LCD pantaila bikoitza: Provides visual readout on both sides of the receiver.
LCD atzeko argia: Ensures clear visibility in low light conditions.
Adjustable Accuracy: Allows switching between high (≤2mm) and low (≤3mm) accuracy settings.
Bolumen erregulagarria: Buzzer volume can be set to loud, soft, or mute.

Huepar LR-5RG Laser Detector Features — Figure 3.2: Key features of the Huepar LR-5RG Laser Detector, including its dual LCD display, backlight, and adjustable volume and accuracy settings.

4. Konfigurazioa

4.1 Powering the Laser Level

Bateriaren instalazioa: Open the battery compartment and insert the 3.7V / 5200mAh Li-ion battery, ensuring correct polarity.
Kargatzen: Connect the Type-C power cord to the laser level and the power adapter, then plug into a power outlet. The battery indicator will show charging status.

4.2 Mounting the Laser Level

The B03CG Pro offers versatile mounting options:

Magnetic Pivoting Base: Attach the laser level to the included 360° magnetic pivoting base. This base can be securely mounted to metal surfaces or hung on a screw/nail.
Tripodearen muntaketa: The laser level features a 1/4"-20 mount thread on its bottom, allowing it to be mounted onto a standard tripod (tripod not included).

Huepar Laser Level Fixing Methods — Figure 4.1: Various fixing methods for the Huepar laser level, including mounting on a tripod via the 1/4"-20 thread and using the 360° magnetic pivoting bracket for wall or metal surface attachment.

5. Operating the Laser Level

5.1 Auto-mailatze modua

When the pendulum is unlocked, the laser level will automatically self-level. If the device is out of its ±4° leveling range, the laser lines will flash rapidly to indicate an out-of-level condition. Adjust the position of the laser level until the lines stop flashing and become steady.

5.2 Manual/Tilt Mode

To use the laser level at any angle (e.g., for stair railing installation), lock the pendulum. This disables the self-leveling function and allows the laser lines to be projected at a fixed angle. The lines will not flash in this mode, indicating that they are not self-leveled.

Self-leveling vs. Manual/Tilt Mode — Figure 5.1: Comparison of Self-leveling Mode (top, laser level on a level surface projecting horizontal and vertical lines) and Manual/Tilt Mode (bottom, laser level tilted to project an angled line, useful for non-level applications like stairs).

5.3 Laser Line Switching Modes

The B03CG Pro allows you to select different laser line combinations based on your application needs. Press the mode button to cycle through the available options:

3 x 360° Laser Lines (all lines on)
Horizontal + Vertical Lines
360° Horizontal Line only
360° Vertical Line only (one or two vertical lines)

Huepar Laser Level 5 Line Switching Modes — Figure 5.2: Illustration of the five different laser line switching modes available on the Huepar laser level, allowing users to select specific horizontal and vertical line combinations for various tasks.

5.4 Pulse Mode with LR-5RG Detector

For outdoor use or in bright light conditions, activate the Pulse Mode on the laser level by pressing the dedicated Pulse Mode Button. This enables the laser level to work with the Huepar LR-5RG Laser Detector, extending the working range up to 200 feet.

GARRANTZITSUA: It is NECESSARY to turn ON the Pulse Mode of the Laser Level when using it with the Huepar LR-5RG laser receiver.

Huepar Laser Level Pulse Mode — Figure 5.3: The laser level operating in Pulse Mode, extending its working range up to 50m/165ft when used with the Huepar Laser Receiver in bright light or outdoor conditions. The receiver's display shows the laser line detection.

6. Operating the LR-5RG Laser Detector

6.1 Detector Features

LCD pantaila bikoitza: Provides visual feedback on both the front and back of the detector.
Backlight Feature: Illuminates the LCD for clear viewargi gutxiko baldintzetan aritzea.
Bolumena erregulagarria: Cycle through loud, soft, or mute buzzer tones.
Accuracy Adjustable: Switch between high and low accuracy settings for precise or quick measurements.

6.2 Using the Detector

When the laser level is in Pulse Mode, move the LR-5RG detector along the desired surface. The detector will provide visual and audible signals to help you locate the laser line:

Arrows on LCD: Indicate whether the detector needs to be moved up or down to align with the laser line.
Beeping Tones:

Slower beeping tone: Detector is far from the laser line.
Fast beeping tone: Detector is getting closer to the laser line.
Continuous beeping tone: Detector is precisely on the laser line.

Huepar LR-5RG Laser Detector Usage — Figure 6.1: How to interpret the Huepar LR-5RG Laser Detector's display. Arrows indicate if the detector is higher or lower than the laser beam, guiding the user to move the receiver up or down until the datum is in line with the laser beam.

Huepar LR-5RG Buzzer Volume — Figure 6.2: The different buzzer volume signals of the Huepar LR-5RG Laser Detector: slower beeping for far, fast beeping for closer, and continuous beeping for on-line, along with options for Loud, Soft, or Mute volume settings.

7. Mantentzea

Garbiketa: Erabili biguna, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Keep the laser output windows clean for optimal performance.
Biltegiratzea: Store the laser level and detector in their hard carry case in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods.
Bateria zaintzea: Recharge the Li-ion battery regularly, even if not in use, to maintain its lifespan. Avoid fully discharging the battery.
Kalibrazioaren egiaztapena: Periodically check the calibration of your laser level to ensure accuracy. Refer to the manufacturer's website or contact support for calibration procedures if needed.

8. Arazoak

Arazoa	Kausa posiblea	Irtenbidea
Laser lerroak azkar keinuka ari dira.	Laser maila bere automailatze-eremutik kanpo dago (±4°).	Place the laser level on a more level surface or adjust its position until the lines become steady.
Laser lerroak lausoak edo ez dira kanpoan ikusten.	Bright ambient light; Pulse Mode not activated.	Activate Pulse Mode on the laser level and use the LR-5RG Laser Detector. Use the target plate to enhance visibility.
LR-5RG Detector not detecting laser.	Laser level not in Pulse Mode; Detector batteries low; Detector too far from laser.	Ensure laser level is in Pulse Mode. Replace detector batteries. Move detector closer to the laser level.
Bateria azkar agortzen da.	All laser lines are on; Battery old or not fully charged.	Turn off unnecessary laser lines. Fully charge the battery before use. Consider replacing the battery if it's old.

9. Zehaztapenak

9.1 Huepar B03CG Pro Laser Level

Ezaugarri	Zehaztapena
Proiekzioa	3 x 360° Green Laser Lines
Laser Klasea	2. klasea
Laser uhin-luzera	505-520 nm
Zehaztasun horizontala / bertikala	±1/9 Inch at 33 Feet
Berdinketa / Konpentsazio Tartea	±4°
Mailatze Denbora	3s
Lan Distantzia	85 feet (300 LUX), 200 feet with Huepar Laser Detector LR-5RG / LR-6RG
Energia iturria	3.7 V / 5200 mAh Li-ioizko bateria
Erreferentziako funtzionamendu-denbora	About 8 hours with all laser beams on
Mendiaren Tamaina	1/4"-20
IP balorazioa	IP54 dust-proof, waterproof and shockproof
Funtzionamendu-tenperatura-tartea	Between -10℃ and +50℃
Biltegiratze-tenperatura-tartea	Between -20℃ and +70℃

9.2 Huepar LR-5RG Laser Detector

Ezaugarri	Zehaztapena
Pultsuaren iraupena	50 µs ; PWM: 5:5
Maiztasuna	10KHz
Bistaratzea	LCD pantaila bikoitza
Leveling Accuracy (High)	≤2mm (1/13in)
Leveling Accuracy (Low)	≤3mm (1/9in)
Lan Distantzia	130ft~200ft (typical) depend on light source
Funtzionamendu Denbora	20 ordu
Auto Power Off (with No Signal Detected)	10min
Energia iturria	2*AA Batteries (Alkaline)
Tamaina (LxWxH)	140 mm × 68 mm × 26 mm
Pisua	140 g

10. Bermea eta Laguntza

The Huepar B03CG Pro Laser Level and LR-5RG Laser Detector come with a 2 urteko bermea erosketa-datatik aurrera. Berme honek ohiko erabileran materialen eta eskulanen akatsak estaltzen ditu.

For technical support, warranty claims, or any questions regarding your product, please visit the official Huepar webwebgunera joan edo zuzenean jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Mesedez, eduki zure produktuaren modelo zenbakia eta erosketa-informazioa prest laguntza-zerbitzuarekin harremanetan jartzean.

Huepar Official Store: Visit Huepar Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.