1. Sarrera eta Produktuaren Azalpenaview
Thank you for choosing the BE COOL BC50LEF2301 50L Dehumidifier. This appliance is designed to efficiently remove excess moisture from the air in your home or commercial space, improving air quality and preventing issues like mold and mildew. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your dehumidifier.
Key features of your BE COOL BC50LEF2301 dehumidifier include:
- Powerful dehumidification: Removes up to 50 liters of moisture per day.
- Suitable for large areas: Effective in rooms up to 125 m³ (50 m²).
- User-friendly touch panel with LED display.
- Adjustable humidity levels from 30% to 80%.
- Ingurumena errespetatzen duen R290 hozgarria.
- 24 orduko tenporizadorearen funtzioa.
- Desizozteko funtzio automatikoa.
- Full water tank alarm and automatic shut-off.
- 7-liter removable water tank.
- Integrated dust filter.
- Potentzia outage memory function.
- Equipped with wheels for easy mobility.
2. Segurtasun-argibideak
Mesedez, irakurri arretaz segurtasun-argibide guztiak tresna erabili aurretik, lesioak edo kalteak saihesteko. Gorde eskuliburu hau etorkizunean erreferentzia gisa.
- Segurtasun elektrikoa: Ziurtatu elikadura hornidura bolumenarekin bat datorrelatage specified on the rating label. Do not operate the unit with a damaged power cord or plug. Do not share the power outlet with other appliances.
- Lekua: Place the dehumidifier on a flat, stable surface. Maintain at least 20 cm (8 inches) clearance around the unit for proper airflow. Do not block air inlets or outlets.
- Hozgarria: This appliance uses R290 refrigerant. Do not puncture the refrigerant circuit. Servicing should only be performed by qualified personnel.
- Ur depositua: Always empty the water tank before moving the unit. Do not drink the collected water.
- Haurrak eta maskotak: Mantendu haurrak eta maskotak gailutik urrun funtzionatzen ari diren bitartean.
- Garbiketa: Deskonektatu beti unitatea garbitu edo mantentze-lanak egin aurretik.
- Funtzionamendu baldintzak: Do not operate the unit in extremely high temperatures or in direct sunlight. The recommended operating temperature range is 5-32°C.
3. Produktuaren osagaiak
Familiarize yourself with the main parts of your dehumidifier:
- Kontrol-panela: Located on the top, with touch buttons and an LED display.
- Aire irteera: Top front, where dry air is expelled.
- Aireko sarrera: Rear, where humid air is drawn in.
- Hauts-iragazkia: Located behind the air inlet, removable for cleaning.
- Ur depositua: Removable tank at the bottom front for collecting condensed water.
- Drainatze-irteera jarraitua: (If applicable) Located at the rear for connecting a drain hose.
- Gurpilak: Unitatea erraz mugitzeko.
- Heldulekua: Eramangarritasunerako helduleku integratua.
4. Konfigurazioa
- Despaketatzea: Kontu handiz atera deshezegailua bere ontzitik. Gorde ontziratzeko materialak etorkizunean biltegiratzeko edo garraiatzeko.
- Lekua:
- Jarri unitatea zutik, gainazal sendo eta berdinean.
- Ensure there is at least 20 cm (8 inches) of free space around the unit to allow for adequate air circulation.
- Avoid placing the unit near heat sources, in direct sunlight, or in areas prone to splashing water.
- For optimal performance, operate the unit within the recommended temperature range of 5-32°C.
- Potentzia-konexioa: Entxufatu elikatze-kablea lurrera konektatutako entxufe elektriko batera. Ziurtatu entxufeak unitatearen potentzia-eskakizunak betetzen dituela.
- Hasierako erabilera: After transport, allow the unit to stand upright for at least 2 hours before plugging it in and turning it on. This allows the refrigerant to settle.
5. Funtzionamendu-argibideak
The BE COOL BC50LEF2301 features an intuitive touch control panel and LED display for easy operation.
5.1 Kontrol panelaren funtzioak
- Pizteko botoia (⏻): Sakatu unitatea pizteko edo itzaltzeko.
- Modu botoia (M): Cycles through different operating modes (e.g., Auto, Continuous, Drying).
- Humidity Setting (%): Adjusts the desired humidity level from 30% to 80% in 5% increments.
- Haizagailuaren abiadura botoia (☰): Selects between two fan speeds (High/Low).
- Tenporizadorearen botoia (⏱): Sets the 24-hour timer for automatic power ON or OFF.
- LED pantaila: Uneko hezetasuna, ezarritako hezetasuna edo tenporizadorearen ezarpenak erakusten ditu.
5.2 Nahi den hezetasuna ezartzea
Press the Humidity Setting button (%) repeatedly to cycle through desired humidity levels. The display will show the selected percentage. The unit will operate until the room humidity reaches the set level, then pause. It will resume operation if the humidity rises above the set level.
5.3 Tenporizadorearen funtzioa
The 24-hour timer allows you to set a specific time for the unit to turn ON or OFF automatically.
- To set Auto-OFF: While the unit is ON, press the Timer button. Use the humidity setting buttons (or dedicated timer adjustment buttons if present) to set the desired number of hours (1-24) after which the unit will turn off.
- To set Auto-ON: While the unit is OFF, press the Timer button. Set the desired number of hours (1-24) after which the unit will turn on.
5.4 Water Tank Full Alarm and Auto Shut-off
When the 7-liter water tank is full, the unit will automatically stop operating, and an alarm will sound (beep). The LED display may also indicate a full tank. Empty the water tank and reinsert it correctly to resume operation.
5.5 Drainatze Jarraitua
For extended operation without needing to empty the water tank, you can connect a drain hose to the continuous drainage outlet at the rear of the unit. Ensure the hose is sloped downwards to allow gravity drainage into a suitable receptacle or floor drain.
5.6 Desizozteko funtzioa
The unit is equipped with an automatic defrost function. If frost builds up on the evaporator coils, the unit will temporarily stop dehumidifying and run the fan to melt the frost. Dehumidification will resume automatically once the defrost cycle is complete.
6. Mantentzea
Mantentze-lan erregularrak zure deshezegailuaren errendimendu optimoa bermatzen du eta bizitza luzatzen du.
6.1 Cleaning the Dust Filter
- Itzali unitatea eta deskonektatu korronte-hartunetik.
- Locate the air inlet grille at the rear of the unit.
- Kendu hauts-iragazkia.
- Clean the filter with a vacuum cleaner or wash it with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reinserting.
- Reinsert the dry filter and close the grille.
Recommendation: Clean the dust filter every two weeks or more frequently depending on usage and air quality.
6.2 Ur depositua hustea
- When the water tank is full, the unit will stop operating and alert you.
- Kontu handiz atera ur-depositua unitatearen aurrealdetik.
- Hustu bildutako ura.
- Clean the tank periodically with mild detergent and water to prevent mold growth. Rinse thoroughly.
- Reinsert the empty tank firmly into the unit. Ensure it is correctly seated to allow the unit to resume operation.
6.3 Unitatearen kanpoaldea garbitzea
Garbitu unitatearen kanpoaldea leun batekin, damp oihalik. Ez erabili produktu kimiko gogorrik, garbitzaile urratzailerik edo disolbatzailerik, gainazala kaltetu baitezakete.
6.4 Biltegiratzea
Unitatea denbora luzez gordetzen baduzu:
- Deskonektatu unitatea eta hustu ur-depositua.
- Clean the dust filter and the exterior.
- Allow the unit to dry completely for at least 24 hours in a well-ventilated area.
- Store the unit upright in a cool, dry place, preferably in its original packaging.
7. Arazoak
Bezeroarentzako arreta-zerbitzura deitu aurretik, jo ezazu arazo ohikoenei buruzko gida honetara:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Unitatea ez da pizten. | Ez dago elikadura hornidurarik. Kable elektrikoa ez dago behar bezala konektatuta. Water tank full or not correctly inserted. | Egiaztatu entxufea eta zirkuitu-hauslea. Ziurtatu kablea ondo konektatuta dagoela. Empty water tank and reinsert it correctly. |
| Unitatea martxan dago, baina ez du hezetasuna kentzen ari. | Giroko tenperatura baxuegia (5 °C-tik behera). Aire-iragazkia beteta. Humidity setting is higher than current room humidity. Ateak/leihoak irekitzen dira. | Operate unit within recommended temperature range. Garbitu aire-iragazkia. Set desired humidity lower than current room humidity. Close doors and windows to isolate the room. |
| Ur-depositua beteta dagoela adierazten du piztuta dago, baina depositua ez dago beteta. | Ur-depositua ez dago behar bezala sartuta. Float switch malfunction. | Kendu ur-depositua eta sartu berriro ondo. Jarri harremanetan bezeroarentzako laguntza-zerbitzuarekin arazoak jarraitzen badu. |
| Unitatea zaratatsua da. | Unitatea ez dago gainazal mailakatu batean. Aire-iragazkia beteta. Barne osagaien arazoa. | Jarri unitatea gainazal lau eta egonkor batean. Garbitu aire-iragazkia. Jarri harremanetan bezeroarentzako laguntzarekin. |
| Izotza bobinetan. | Giro-tenperatura baxuegia. | The unit's automatic defrost function should activate. If not, turn off the unit and allow it to defrost naturally. Ensure operating temperature is above 5°C. |
If the problem persists after trying these solutions, please contact BE COOL customer support.
8. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | Izan Cool |
| Modelo zenbakia | BC50LEF2301 |
| Deshumidifikazio Ahalmena | Approx. 50 Liters/24h |
| Ur deposituaren edukiera | 7 litro |
| Boterea | 680 Watt |
| Gomendatutako Gelaren Tamaina | Up to 125 m³ (50 m²) |
| Produktuaren neurriak (L x W x H) | 26.6 x 37.8 x 61.5 cm |
| Elementuaren pisua | 19 kilogramo |
| Materiala | Plastikoa |
| Hozgarria | R290 (ingurumena errespetatzen duena) |
| Fan Abiadurak | 2 |
| Ezaugarri bereziak | Two fan levels, Dust filter, Full water tank alarm, Defrost function, Power outage memory, 24-hour timer, Touch panel, Removable tank, Wheels. |
9. Bermea eta Laguntza
This BE COOL dehumidifier comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BE COOL customer support. Contact information can typically be found on the product packaging, the official BE COOL webgunea edo zure erosketa-agiria.
When contacting support, please have your model number (BC50LEF2301) and purchase date ready.