PAL 120W Multi Color Dual Zone Remote Control Transformer Instruction Manual

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120). This device is engineered to power and control multi-color LED lighting systems, offering advanced dual-zone functionality for versatile and dynamic lighting solutions in various applications.

2. Segurtasun informazioa

OHARRA: Segurtasun-jarraibide hauek ez betetzeak sutea, deskarga elektrikoa, lesioak edo produktuari edo ondasunei kalteak eragin ditzake.

• Always disconnect power at the circuit breaker before installing, servicing, or performing any maintenance on the transformer or connected lighting.
• Instalazioa elektrizista kualifikatu batek egin behar du, tokiko eta estatuko araudi elektriko guztien arabera.
• Do not operate the transformer if it has been damaged in any way.
• Ensure the transformer is installed in a location that is protected from direct water exposure, although the unit is rated IP65 for dust and water jet protection.
• Egiaztatu hornidura voltage matches the transformer's specified input voltage (100-240V AC, 50/60Hz).
• Do not exceed the maximum output power of 120 Watts.

3. Paketearen edukia

Please verify that all items listed below are present and undamaged in your package:

• 1 x PAL 120W Multi Color Dual Zone Remote Control Transformer (Model: 64-PCR-3D-120)
• 1 x PAL PCZ-2 Color Touch 2 Zone Remote Control
• 2 x AAA bateria (urrutiko aginterako)

Image: The PAL 120W Multi Color Dual Zone Remote Control Transformer, its accompanying PCZ-2 remote control, and two AAA batteries. The transformer is a dark grey rectangular unit with connection ports on one side, and the remote is shown in its packaging next to it.

4. Produktua amaitu daview

4.1. Transformer Unit (64-PCR-3D-120)

The main transformer unit is a robust, weather-resistant enclosure designed for outdoor or indoor installation. It converts standard AC line voltage to 24V DC, suitable for PAL LED lighting products. Key features include:

• Sarrera boltage: 100-240V AC, 50/60Hz
• Hornidura potentzia: 125 Watt
• Irteera potentzia: 120 Watts (24V DC)
• IP balorazioa: IP65 (Hautsaren aurkakoa eta ur-zorrotaden aurkako babesa)
• Ziurtagiriak: CE, SELV

4.2. PCZ-2 Color Touch 2 Zone Remote Control

The PCZ-2 remote control allows for intuitive management of your connected LED lighting. It features a color touch wheel for precise color selection and dedicated buttons for controlling two independent lighting zones, brightness, and various lighting modes.

5. Konfigurazioa eta instalazioa

Before beginning installation, ensure all power is disconnected at the main circuit breaker.

1. Muntaketa: Select a suitable, secure location for the transformer. Mount the unit vertically using appropriate fasteners, ensuring adequate ventilation around the enclosure.
2. Sarrerako kableatzea: Connect the AC input power (100-240V AC) to the designated input terminals on the transformer. Ensure proper polarity (Live, Neutral, Ground) as indicated on the unit. Use appropriate gauge wiring for the power requirements.
3. Irteerako kableatzea: Connect your 24V DC PAL LED lighting fixtures to the output terminals. The transformer supports two independent zones. Ensure correct polarity (+ and -) for each lighting fixture. Refer to your lighting fixture's manual for specific wiring diagrams.
4. Urruneko kontroleko bateriak: Open the battery compartment on the PCZ-2 remote control and insert the two AAA batteries, observing the correct polarity.
5. Piztu: Konexio guztiak ondo finkatuta eta egiaztatuta daudenean, berrezarri korrontea etengailu elektrikoan.

6. Funtzionamendu-argibideak

6.1. Urruneko agintea parekatzea

The PCZ-2 remote control should be pre-paired with the transformer. If pairing is lost or a new remote is introduced:

1. Ziurtatu transformadorea piztuta dagoela.
2. Within 5 seconds of powering on the transformer, press and hold the 'Zone 1 ON' button on the remote control for approximately 3 seconds. The connected lights should flash to confirm successful pairing.
3. Repeat for 'Zone 2 ON' button if you wish to pair the second zone.

6.2. Basic Remote Functions

• Piztu/Itzali: Press the 'ON' or 'OFF' buttons for each zone to toggle power.
• Kolore aukeraketa: Use the color touch wheel to select desired static colors.
• Distira kontrola: Use the brightness up/down buttons to adjust the intensity of the selected color or mode.
• Modu aukeraketa: Cycle through pre-programmed lighting modes (e.g., color changing, fading) using the 'Mode' button.
• Zona kontrola: Independently control Zone 1 and Zone 2 using their respective buttons.

7. Mantentzea

• Garbiketa: Periodically clean the exterior of the transformer and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ikuskapena: Regularly inspect wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
• Bateria ordezkatzea: Replace the AAA batteries in the remote control when its performance degrades or it stops responding.

8. Arazoak

9. Zehaztapenak

10. Bermea eta Laguntza

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official PAL Lighting website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact PAL Lighting customer service directly. Contact information can typically be found on the manufacturer's webgunea edo produktuaren ontziak.