KALI AUDIO LP-UNF 4-inch Ultra Nearfield Powered Monitor System with Bluetooth

1. Sarrera

This manual provides comprehensive instructions for the KALI AUDIO LP-UNF 4-inch Ultra Nearfield Powered Monitor System. Please read this manual thoroughly before operating the device to ensure proper setup, optimal performance, and safety. Retain this manual for future reference.

2. Segurtasun informazioa

Observe the following safety precautions to prevent damage to the unit and ensure user safety:

• Energia iturria: Konektatu unitatea zehaztutako elikatze-iturrira soilik.
• Aireztapena: Ensure adequate ventilation around the speakers. Do not block ventilation openings.
• Hezetasuna: Do not expose the unit to rain or moisture. Avoid placing liquid-filled objects on the speakers.
• Beroa: Mantendu unitatea bero-iturrietatik urrun, hala nola erradiadoreetatik, bero-erregistroetatik, sukaldeetatik edo beroa sortzen duten beste aparatu batzuetatik.
• Zerbitzua: Ez saiatu produktu hau zuk zeuk ematen. Bidali zerbitzu guztiak zerbitzu kualifikatuko langileengana.
• Garbiketa: Deskonektatu kablea garbitu aurretik. Erabili zapi lehor bat garbitzeko.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• KALI AUDIO LP-UNF Powered Monitor (Primary)
• KALI AUDIO LP-UNF Powered Monitor (Secondary)
• Elikatze-kablea
• Inter-speaker Connection Cable
• Elikatze-moldagailua
• Remote Control (if included with specific model variant)
• Argibide-eskuliburu hau

Image: Rear panel of the LP-UNF monitor showing input/output options and included power cable, inter-speaker cable, and power adapter.

4. Produktua amaitu daview

The KALI AUDIO LP-UNF is a 4-inch Ultra Nearfield Powered Monitor System designed for accurate audio reproduction in studio and home environments. It features a 4.5-inch woofer and a 1-inch tweeter, with various input options including USB-C, TRS, RCA, and Bluetooth connectivity.

4.1 Aurreko panela

Irudia: Aurrealdea view of two LP-UNF monitors, highlighting the woofer, tweeter, and front-firing port.

• Txiolaria: 1-inch soft dome tweeter for high-frequency reproduction.
• Woofer-a: 4.5-inch high-excursion woofer for low and mid-frequency reproduction.
• Front-Firing Port: Designed to minimize port noise and compression.
• Volume Control / LED Indicator: Integrated control for adjusting output level and indicating power/status.

4.2 Atzeko panela

Irudia: Xehetasun handikoa view of the LP-UNF rear panel, showing various input connectors, power switch, and DIP switches for acoustic tuning.

• TRS sarrera: Balanced 1/4-inch input for professional audio equipment.
• RCA sarrera: Unbalanced input for consumer audio devices.
• USB-C sarrera: Digital audio input for computers and mobile devices.
• Bluetooth antena: Haririk gabeko audio erreprodukziorako.
• DIP etengailuak: For acoustic boundary compensation and EQ adjustments.
• Potentzia sarrera: 24VDCko elikatze konexioa.
• Switch potentziala: On/Off control for the monitor.
• Output to Secondary: Connection for the passive secondary speaker.

5. Konfigurazioa

5.1 Jartzea

Proper placement is crucial for optimal sound reproduction. The LP-UNF monitors are designed for ultra-nearfield listening, typically at arm's length (around 0.8 meters or 31 inches) from the listener.

• Stereo Triangle: Position the speakers and your listening position to form an equilateral triangle.
• Ear Level: Ensure the tweeters are at approximately ear level.
• Isolatze: Use isolation pads or stands to decouple the speakers from your desk surface, reducing unwanted vibrations.

Image: LP-UNF monitors positioned on stands on a desk, demonstrating a typical nearfield setup with a laptop.

5.2 Konexioak

The LP-UNF system consists of one primary (active) speaker and one secondary (passive) speaker. All inputs and controls are located on the primary speaker.

1. Connect Secondary Speaker: Use the provided inter-speaker cable to connect the 'Output to Secondary' port on the primary speaker to the 'Input From Primary' port on the secondary speaker. Ensure a secure connection.
2. Konektatu audio iturria: Choose one of the following input methods:
   • USB-C: Connect a USB-C cable from your computer or compatible device to the USB-C input on the primary speaker.
   • TRS: Connect balanced 1/4-inch TRS cables from your audio interface or mixer to the TRS inputs (L/R) on the primary speaker.
   • RCA: Connect RCA cables from your audio device to the RCA inputs (L/R) on the primary speaker.
   • Bluetootha: Refer to Section 6.3 for Bluetooth pairing instructions.
3. Konektatu energia: Connect the power adapter to the 24VDC input on the primary speaker, then plug the power cable into a wall outlet.

Irudia: Atzealdea view of the LP-UNF monitors showing the inter-speaker cable connecting the primary and secondary units, along with other input connections.

5.3 Boundary Compensation EQ Settings

The LP-UNF features DIP switches on the rear panel to adjust the speaker's frequency response based on its placement in your room. This helps to compensate for acoustic anomalies caused by boundaries (walls, desks).

Image: Close-up of the DIP switches on the LP-UNF rear panel, illustrating various settings for acoustic compensation.

Refer to the diagram on the rear panel for specific switch configurations. Common settings include:

• Espazio librea: For speakers placed on stands away from walls.
• On Desk, Near Wall: For speakers placed on a desk close to a wall.
• On Desk, Corner: For speakers placed on a desk in a corner.
• +/- 2dB High Frequency: Goi-soinuen erantzuna doitzen du.
• +/- 2dB Low Frequency: Baxuen erantzuna doitzen du.
• LED piztu/itzali: Controls the front panel LED indicator.

Experiment with these settings to find the most accurate sound for your listening environment.

6. Funtzionamendua

6.1 Piztu/Itzali

Locate the power switch on the rear panel of the primary speaker. Flip the switch to the 'ON' position to power on the system. The front panel LED will illuminate. Flip the switch to 'OFF' to power down.

6.2 Bolumen kontrola

The volume can be adjusted using the controls on the front panel of the primary speaker or via the included remote control. The front panel features '+' and '-' buttons to increase or decrease the volume. The LED indicator will change intensity or color to reflect the current volume level.

Image: Close-up of the LP-UNF front panel, showing the illuminated blue LED indicator and the '+' and '-' volume control markings.

6.3 Bluetooth parekatzea

Bluetooth gailu bat parekatzeko:

1. Ensure the LP-UNF system is powered on.
2. Activate Bluetooth on your primary speaker (refer to specific model instructions if a dedicated Bluetooth button is present, otherwise it may automatically enter pairing mode when no other input is active).
3. On your mobile device or computer, go to Bluetooth settings and search for available devices.
4. Select "KALI AUDIO LP-UNF" from the list.
5. Once connected, the LED indicator on the speaker may change to confirm pairing.

7. Mantentzea

Regular maintenance ensures the longevity and performance of your LP-UNF monitors.

• Garbiketa: Use a soft, dry cloth to wipe down the exterior of the speakers. Do not use liquid cleaners or abrasive materials.
• Hautsa: Periodically remove dust from the speaker cones and ports using a soft brush or compressed air.
• Kableak: Inspect all cables for damage or wear. Replace any damaged cables immediately.
• Biltegiratzea: Bozgorailuak denbora luzez gordetzen badituzu, deskonektatu itzazu korrontetik eta gorde itzazu leku fresko eta lehor batean, hobe jatorrizko ontzian.

8. Arazoak

If you encounter issues with your LP-UNF system, refer to the following common troubleshooting steps:

• Potentziarik gabe:
  • Ensure the power cable is securely connected to both the speaker and the power outlet.
  • Verify the power switch on the rear panel is in the 'ON' position.
  • Egiaztatu korronte-hartunea funtzionala den.
• Soinurik ez:
  • Confirm the volume is turned up on both the speakers and your audio source.
  • Check all audio cables for secure connections and damage.
  • Ensure the correct input source is selected (if applicable, for models with input selection).
  • If using Bluetooth, ensure the device is paired and connected.
  • Verify the inter-speaker cable is firmly connected between the primary and secondary units.
• Soinu distortsionatua:
  • Murriztu bai bozgorailuen bai audio-iturriaren bolumena.
  • Kableak hondatuta dauden egiaztatu.
  • Ensure the input signal is not overdriving the speakers.
• Bluetooth konexio-arazoak:
  • Ensure the speakers are not already paired to another device.
  • Move your Bluetooth device closer to the speakers.
  • Saiatu gailua desparekatzen eta berriro parekatzen.

If problems persist, contact KALI AUDIO customer support.

9. Zehaztapenak

10. Bermea eta Laguntza

10.1 Berme mugatua

The KALI AUDIO LP-UNF Monitor System comes with a limited warranty. Please refer to the warranty card included with your product or visit the KALI AUDIO official webwebgunean bermearen estaldurari, iraupenari eta erreklamazio-prozesuari buruzko baldintza zehatzak ikusteko.

10.2 Bezeroarentzako laguntza

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact KALI AUDIO customer support through their official webgunea edo erosketa-dokumentazioarekin batera emandako harremanetarako informazioa.