MCGOR 10-inch Rechargeable Motion Sensor Under Cabinet Lighting Instruction Manual

1. Sarrera

Thank you for choosing the MCGOR 10-inch Rechargeable Motion Sensor Under Cabinet Lighting. This product is designed to provide convenient, energy-efficient illumination for various indoor spaces such as kitchens, closets, stairs, and hallways. Featuring a motion sensor, dimmable brightness, and easy magnetic installation, these lights enhance visibility and safety.

Image 1.1: MCGOR 10-inch Under Cabinet Lights (2-Pack)

2. Paketearen edukia

Mesedez, egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

• 2 x MCGOR 10-inch Cabinet Lights
• 2 x USB-C Charging Cords
• 6 x Burdinazko plaka itsasgarriak
• 6 x Torlojuak
• 1 x Argibide eskuliburua

3. Produktuaren ezaugarriak

• Mugimendu-sentsore modua: Automatically activates when motion is detected within 120° and 10 feet in low-light conditions, turning off after approximately 20 seconds of no motion.
• Distira erregulagarria: Features 5 levels of brightness adjustment to suit various lighting needs, from task lighting to a subtle night light.
• Beti aktibatuta modua: Allows the light to remain continuously on for extended use, suitable for reading or as a flashlight.
• Bateria kargagarria: Equipped with a built-in 1800mAh rechargeable battery, easily charged via USB-C. Eliminates the need for frequent battery replacement.
• Instalazio erraza: Integrated strong magnets allow direct attachment to iron surfaces. For non-metallic surfaces, use the included adhesive metal plates or screws.

Image 3.1: Feature Comparison

4. Konfigurazioa eta instalazioa

The MCGOR under cabinet lights offer two primary installation methods:

4.1 Magnetic Attachment (for Metal Surfaces)

1. Ensure the metal surface is clean and dry.
2. Simply place the light directly onto the ironwork surface. The built-in magnets will secure it in place.

4.2 Adhesive Metal Plates (for Non-Metallic Surfaces)

1. Clean and dry the desired installation surface thoroughly.
2. Peel the protective film from one side of an adhesive iron plate.
3. Stick the adhesive iron plate firmly onto the chosen surface. Apply pressure for 30 seconds to ensure strong adhesion.
4. Allow 24 hours for the adhesive to fully cure before attaching the light.
5. Once the plate is secure, the light can be magnetically attached to the plate.

4.3 Screw Installation (Optional)

For a more permanent installation or on surfaces where adhesive may not hold well (e.g., rough wood, humid environments), use the provided screws to attach the metal plates. The lights can then be magnetically attached to these screwed-in plates.

Image 4.1: Two Installation Methods

5. Funtzionamendu-argibideak

The light features a slide switch and a brightness adjustment button.

Image 5.1: Light Controls Overview

5.1 Modu hautaketa

Use the slide switch to select one of three modes:

• ON: The light will remain continuously on.
• DESaktibatuta: Argia itzali egingo da.
• AUTOA: Activates motion sensor mode. The light will turn on automatically when motion is detected in a dark or low-light environment and turn off after approximately 20 seconds of no motion.

Image 5.2: Motion Sensor and Always-On Modes

5.2 Distira doitzea

In either ON or AUTO mode, press and hold the brightness adjustment button (located next to the PIR sensor) to cycle through 5 levels of brightness. Release the button when the desired brightness is reached.

Image 5.3: 5 Levels of Brightness

6. Kargatzea

The MCGOR under cabinet light is equipped with a rechargeable 1800mAh battery.

• Kargatzeko ataka: Bilatu USB-C kargatzeko ataka argiaren alboan.
• Konexioa: Connect the provided USB-C charging cord to the light and plug the other end into a standard USB power adapter (not included) or a computer USB port.
• Kargatzeko adierazlea: The PIR sensor/charging indicator light will illuminate red during charging and turn green when fully charged.
• Bateriaren iraupena: A full charge can last approximately 7-45 days in Motion Sensor Mode (depending on usage frequency) or 8 hours in Always-On Mode at 100% brightness.

Image 6.1: USB-C Charging

7. Mantentzea

To ensure optimal performance and longevity of your MCGOR under cabinet light:

• Garbiketa: Wipe the light gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Uraren esposizioa: This product is not water-resistant. Avoid exposure to water or high humidity.
• Bateria zaintzea: Kargatu bateria aldizka, maiz erabiltzen ez bada ere, bateriaren osasuna mantentzeko. Saihestu bateria denbora luzez guztiz agortzea.

8. Arazoak

9. Zehaztapenak

10. Segurtasun informazioa

• Ez desmuntatu edo aldatu produktua.
• Mantendu uretatik eta hezetasun handiko inguruneetatik urrun.
• Ez jarri eguzki-argiaren edo tenperatura altuen eraginpean zuzenean.
• Mantendu haurren eskura.
• Erabili emandako USB-C kablea soilik kargatzeko.
• Saihestu denbora luzez LED argi-iturriari zuzenean begiratzea.

11. Bermea eta Laguntza

For warranty information or technical support, please refer to the product packaging or contact MCGOR customer service directly. Contact details are typically available on the manufacturer's official webgunea edo zure erosketa plataformaren bidez.