COMHOMA Convertible Futon Sofa Bed Instruction Manual

1. Segurtasun informazioa

Mesedez, irakurri arretaz argibide guztiak muntatu eta erabili aurretik. Gorde eskuliburu hau etorkizunean erreferentzia gisa.

• Apar eta tapizeriazko gainazal guztiek sukoitasun-arauak betetzen dituzte.
• Keep the futon away from open flames or high heat sources to prevent fire hazards.
• Supervise children and pets around the futon to avoid entrapment risks, especially during conversion between sofa and bed modes.
• Ensure all legs are securely attached and fully extended when using the futon in any configuration to maintain stability.
• Ez gainditu 300 kiloko gehienezko pisu-muga.

2. Paketearen edukia

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact COMHOMA customer support.

• Futon Seat Sections (2)
• Futon Backrest Sections (2)
• Euskarri-hankak (6)
• Pillows (2)
• Slipcover (1)
• Muntaketa-tresneria (torlojuak, arandelak, Allen giltza)

3. Muntatzeko jarraibideak

Assembly typically takes less than 30 minutes. It is recommended to have two people for easier assembly.

1. Deskonprimitu osagaiak: Kontu handiz atera pieza guztiak paketetik eta jarri gainazal garbi eta leun batean marradurak saihesteko.
2. Attach Metal Racks: Insert the metal support racks into the designated slots within the cushioning of both seat and backrest sections. Ensure they are oriented correctly for proper alignment.
3. Konektatu atalak: Align the two futon sections and secure them together using the provided hardware. Tighten all screws firmly but do not overtighten.
4. Hankak instalatu: Screw the six support legs into the pre-drilled holes on the underside of the futon frame. Ensure all legs are tightened securely.
5. Apply Slipcover: If desired, place the slipcover over the futon.
6. Position Pillows: Place the two included pillows on the futon.

Image: Visual guide for futon assembly, illustrating leg attachment and section connection.

4. Funtzionamendu-argibideak

The COMHOMA Convertible Futon Sofa Bed offers multiple configurations for versatile use.

4.1 Bizkarraldea doitzea

The futon features a 5-gear adjustable backrest, allowing you to select various reclining positions.

1. To adjust, locate the two buttons or levers at the bottom of the iron frame, typically near the backrest hinges.
2. Press these buttons simultaneously and gently push or pull the backrest to your desired angle.
3. Release the buttons once the backrest clicks into one of the five available positions.

Image: Illustration of the 5-gear backrest adjustment, detailing positions from upright to fully flat.

4.2 Ohe bihurtzea

To convert the futon from a sofa to a bed:

1. Ensure there is sufficient clear space behind the futon for the backrest to lay flat.
2. Adjust the backrest to its fully reclined (flat) position by pressing the adjustment buttons and lowering it completely.
3. If applicable, extend any hidden support legs from the backrest to provide additional stability in bed mode.

Image: Comparison of the futon in sofa configuration (sitting mode) and fully extended bed configuration (sleeping mode).

4.3 Returning to Sofa Mode

To convert the futon from a bed back to a sofa:

1. Lift the backrest from its flat position while pressing the adjustment buttons.
2. Guide the backrest upwards until it locks into an upright or desired reclining position.

5. Mantentzea

Proper care will extend the life and appearance of your futon.

5.1 Garbiketa

• The futon features a removable and washable slipcover for easy cleaning.
• For general cleaning, use water-based cleaners (Upholstery Cleaning Code 'W'). Test any cleaning solution on an inconspicuous area first.
• Aspiratu aldizka hautsa eta hondakinak kentzeko.
• For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain.

Image: Features of the removable and washable sofa cover, emphasizing ease of maintenance.

5.2 Arreta orokorra

• Saihestu eguzki-argia zuzenean ehuna kolore galtzea saihesteko.
• Kuxinak aldian-aldian biratu higadura uniformea ​​ziurtatzeko.
• Periodically check and tighten all assembly hardware to ensure structural integrity.

6. Arazoak

If you encounter issues with your futon, refer to the following common solutions:

• Muntatzeko zailtasuna: Ensure all metal racks and components are correctly aligned before tightening screws. Refer to the assembly diagram. If a part appears to be incorrectly manufactured or missing, contact customer support.
• Ezegonkortasuna/Dardara: Verify that all six support legs are securely tightened and fully extended. Ensure the futon is placed on a flat, even surface. If using in bed mode, confirm any additional support legs are deployed.
• Bizkarraldea ez da doitzen: Check that the adjustment buttons/levers are fully depressed when attempting to change the backrest angle. Ensure no obstructions are preventing movement.
• Futon Feels Too Firm: The futon is designed with a medium-firm foam fill. If a softer feel is desired, consider adding a mattress topper (not included).

7. Zehaztapenak

8. Bermea eta Laguntza

This COMHOMA Convertible Futon Sofa Bed comes with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or contact COMHOMA customer service.

For any questions, missing parts, or support needs, please contact COMHOMA customer service through the retailer where the product was purchased or visit the official COMHOMA webgunea.