DJI Focus Pro LiDAR Instruction Manual

1. Sarrera

The DJI Focus Pro LiDAR is an advanced ranging system designed to enhance autofocus capabilities for professional video production. It features a high density of ranging points and an extended maximum focus distance, making it suitable for various shooting scenarios, including those involving moving subjects and telephoto lenses. This device is compatible with DJI RS 4 Pro, DJI RS 3 Pro, and DJI Focus Pro Grip, and can enable autofocus for calibrated manual lenses when paired with the DJI Focus Pro Motor.

2. Zer dago kutxan

Egiaztatu elementu hauek guztiak zure paketean sartuta daudela:

Focus Pro LiDAR × 1
Multi-Camera Control Cable (USB-C, 30 cm) × 1

DJI Focus Pro LiDAR unit and USB-C cable — Image 2.1: DJI Focus Pro LiDAR unit and included USB-C cable.

3. Produktua amaitu daview

The DJI Focus Pro LiDAR unit is a compact device designed for precise distance measurement and autofocus assistance. It features a front-facing lens for ranging and a hot shoe mount for attachment to compatible camera setups.

Aurrealdea view of DJI Focus Pro LiDAR — 3.1. irudia: Aurrealdea view of the DJI Focus Pro LiDAR, showing the ranging lens.

The rear of the unit includes various ports and controls for operation and connectivity.

Atzekoa view of DJI Focus Pro LiDAR with ports and controls — 3.2. irudia: Atzekoa view of the DJI Focus Pro LiDAR, illustrating the control buttons and USB-C ports.

4. Konfigurazioa

To set up your DJI Focus Pro LiDAR, follow these steps:

Muntaketa: Attach the LiDAR unit to your compatible DJI RS 4 Pro, DJI RS 3 Pro, or DJI Focus Pro Grip using its integrated hot shoe mount. Ensure it is securely fastened.
Konexioa: Use the provided Multi-Camera Control Cable (USB-C, 30 cm) to connect the LiDAR to your stabilizer or grip. Refer to your stabilizer's manual for specific port locations.
Piztu: Power on your stabilizer or grip. The LiDAR unit will power on automatically.

DJI Focus Pro LiDAR mounted on a camera setup — Image 4.1: The DJI Focus Pro LiDAR mounted on a camera and stabilizer system.

5. Funtzionamendu-argibideak

The DJI Focus Pro LiDAR provides advanced autofocus capabilities. Here are key operational aspects:

Ranging Performance: The LiDAR features 76,800 ranging points, significantly improving edge detection for human subjects and reducing focus hunting. It offers a maximum focus distance of 20 meters.
ren eremua View (FOV): The 70° FOV is optimized for capturing edge compositions and close-up shots, providing a wider area for focus detection.
Freskatze-tasa: A 30 Hz LiDAR refresh rate ensures rapid subject information collection, which is crucial for maintaining confident focus on moving subjects.
Autofocus with Manual Lenses: When paired with the DJI Focus Pro Motor, the LiDAR can enable autofocus functionality for manual lenses that have undergone calibration.
Focus Distance Extension (2x Zoom): By default, the LiDAR's ToF sensor operates within a 10-meter sensing range when the stabilizer's screen is in 1x mode. To extend the focus distance up to 20 meters, tap the '+' icon on the stabilizer's screen to activate the 2x zoom display mode.

6. Mantentzea

Proper maintenance ensures the longevity and optimal performance of your DJI Focus Pro LiDAR:

Garbiketa: Use a soft, dry cloth to clean the exterior of the LiDAR unit. For the lens, use a specialized lens cleaning cloth and solution. Avoid abrasive materials or harsh chemicals.
Biltegiratzea: Store the LiDAR in a cool, dry place away from direct sunlight and extreme temperatures. Use a protective case when transporting the unit to prevent damage.
Manipulazioa: Avoid dropping or subjecting the unit to strong impacts. Do not attempt to disassemble the unit, as this will void the warranty.

7. Arazoak

If you encounter issues with your DJI Focus Pro LiDAR, consider the following common solutions:

LiDAR Not Powering On: Ensure the Multi-Camera Control Cable is securely connected to both the LiDAR and the stabilizer/grip. Verify that the stabilizer/grip is powered on and has sufficient battery.
Autofokua ez dabil: Check if the LiDAR is properly connected and recognized by your stabilizer. If using a manual lens, ensure it has been calibrated and that the DJI Focus Pro Motor is correctly installed and connected. Confirm that the autofocus mode is enabled on your stabilizer's screen.
Inaccurate Focusing: Clean the LiDAR lens to ensure no obstructions are interfering with its ranging capabilities. Ensure there are no reflective surfaces directly in front of the LiDAR that could cause interference.
Limited Focus Range: If experiencing a limited focus range (e.g., 10 meters), ensure the 2x zoom display mode is activated on your stabilizer's screen to extend the range to 20 meters.

If problems persist, contact DJI Support for further assistance.

8. Zehaztapenak

Ezaugarri	Xehetasuna
Modelo zenbakia	6941565981103
Neurriak (L x W x H)	3.84" x 2.66" x 2.21"
Elementuaren pisua	140 gramo
Kolorea	Schwarz (beltza)
Gailu bateragarriak	DJI RS 4 Pro, DJI RS 3 Pro, DJI Focus Pro Grip
Ranging Points	76,800
Max Focus Distance	20 metro
ren eremua View (FOV)	70°
LiDAR Refresh Rate	30 Hz
Etengabeko jaurtiketa abiadura	30 FPS

9. Bermea eta Laguntza

The DJI Focus Pro LiDAR is covered by a warranty provided by DJI. For specific warranty terms and conditions, please refer to the official DJI webgunea edo produktuarekin batera datorren berme-txartela.

For technical support, troubleshooting assistance, or service inquiries, please visit the official DJI Support page or contact their customer service directly. Keep your proof of purchase and product serial number readily available when seeking support.

Lineako laguntza: www.dji.com/support

	DJI LIDAR Range Finder (RS) User Guide - Features, Setup, and Specifications Explore the DJI LIDAR Range Finder (RS) user guide. Learn about its LiDAR focus technology, integrated camera, compatibility with DJI RS 3 Pro and Focus Motor, setup, operation, and specifications.
	DJI Focus Pro User Manual - Comprehensive Lens Control System Guide Detailed user manual for the DJI Focus Pro, an Automated Manual Focus (AMF) lens control system. Learn about its Motor, LiDAR, Grip, and Hand Unit for professional camera focus and zoom.
	DJI RS 3 Pro-ren argitalpen oharrak eta firmware eguneraketak DJI RS 3 Pro gimbalaren bertsio ofizialaren oharrak eta firmwarearen eguneratzeen historia, funtzio berriak, akatsen konponketak eta hainbat kamera-sistema eta osagarriren bateragarritasunari buruzko informazioa barne.
	Leishen LIDAR Produktuen Gida: Osoaview LiDAR sentsoreen eta osagaien Arakatu Leishen LIDAR produktuen katalogoa, LiDAR sentsore sorta zabal baten zehaztapen, ezaugarri eta aplikazio zehatzak barne, besteak beste, automobilgintzako mailakoak, abiadura handiko eskaneatzeak, MEMSak, irismen luzekoak, nabigazioak, talkaren aurkakoak, triangeluarrak eta transinpedantzia bezalako osagai espezializatuak. ampLiDAR soluzio aproposa ibilgailu autonomoetarako, robotikarako, topografiarako eta gehiagorako.
	LSLiDAR LS74A Erabiltzailearen Eskuliburua: Zehaztapenak, Funtzionamendua eta Mantentze-lanak LSLiDAR LS74A LiDAR sentsorearen erabiltzailearen eskuliburu osoa. Zehaztapen teknikoak, funtzionamendu-printzipioak, interfaze elektrikoa, komunikazio-protokoloak, datuak bistaratzeko softwarea eta mantentze-jarraibideak biltzen ditu.
	ERDI LASER LRF300H Single Point Laser Ranging Module Technical Specifications Explore the technical specifications and features of the ERDI LASER LRF300H, a high-accuracy, compact laser ranging module designed for applications like drones, robotics, and vehicle systems. Details include range, frequency, accuracy, and communication protocols.