Timex Expedition CAT5 41mm Digital Watch User Manual

Sarrera

This manual provides detailed instructions for the operation and maintenance of your Timex Expedition CAT5 41mm Digital Watch, Model TW4B303009J. Please read this guide thoroughly to ensure proper use and to fully utilize all features of your timepiece. This watch is designed for durability and functionality, featuring a digital display, acrylic lens, and water resistance up to 100 meters.

1. irudia: Aurrealdea view of the Timex Expedition CAT5 41mm Digital Watch.

Konfigurazioa: Ordua eta data ezartzea

Your Timex Expedition watch features two independent time zones (T1 and T2), each with its own time and date settings. This allows for tracking different locations simultaneously.

Botoiaren funtzioak amaituview:

• SET (Top Left): Ezarpen moduetara sartzeko eta irteteko erabiltzen da.
• MODUA (Beheko ezkerrean): Cycles through different watch modes (Chronograph, Timer, Alarms, Timekeeping). Also used to navigate between settings within a mode.
• START/SPLIT (Top Right): Used to increment values in setting modes or start/split functions in Chronograph/Timer.
• STOP/RESET (Bottom Right): Used to decrement values in setting modes or stop/reset functions in Chronograph/Timer.
• INDIGLO (Bottom Center): Atzeko argia aktibatzen du.

Setting Time (T1 or T2)

1. Ensure the watch is in Timekeeping mode. If not, press the MODUA button repeatedly until the current time is displayed.
2. Eduki sakatuta EZARTU button (Top Left) until "HOLD TO SET" appears, followed by "SET TIME 1" or "SET TIME 2" with a blinking indicator.
3. Erabili HASI / ZATITU (Top Right) or STOP / RESET (Bottom Right) buttons to select either "TIME 1" or "TIME 2" for adjustment.
4. Sakatu MODUA button (Bottom Left) to enter the time setting for the selected time zone. The hour value will begin blinking.
5. Erabili HASI / ZATITU (Top Right) or STOP / RESET (Bottom Right) buttons to adjust the hour. Press and hold for faster adjustment.
6. Sakatu MODUA button to move to the minute setting. Adjust minutes using the HASI / ZATITU or STOP / RESET botoiak.
7. Sakatu MODUA button to move to the seconds setting. Use the HASI / ZATITU or STOP / RESET buttons to reset seconds to zero.
8. Denbora ezarri ondoren, sakatu EZARTU button (Top Left) to exit the setting mode.

Setting Date (Month, Day, Year, and Format)

1. Ensure the watch is in Timekeeping mode.
2. Eduki sakatuta EZARTU button (Top Left) until "HOLD TO SET" appears, followed by "SET TIME 1" or "SET TIME 2". Select the desired time zone (T1 or T2) for date adjustment.
3. Sakatu MODUA button repeatedly to cycle through time settings (hours, minutes, seconds) until the month value starts blinking.
4. Erabili HASI / ZATITU or STOP / RESET hilabetea doitzeko botoiak.
5. Sakatu MODUA button to move to the day setting. Adjust the day.
6. Sakatu MODUA button to move to the year setting. Adjust the year.
7. Sakatu MODUA button to cycle through time format (12HR/24HR) and date format (MM.DD / DD.MM). Adjust as desired using HASI / ZATITU or STOP / RESET.
8. Once date and formats are set, press the EZARTU irteteko botoia.

Switching Main Time Zone Display (T1/T2)

Azkar view your alternate time zone (T2 if T1 is main, or vice-versa), simply press the HASI / ZATITU button (Top Right) once. The display will briefly show the alternate time zone.

To permanently switch your main displayed time zone:

1. From Timekeeping mode, press and hold the HASI / ZATITU button (Top Right) for a few seconds.
2. The watch will switch its main display to the other time zone (e.g., from T1 to T2, or T2 to T1).

Funtzionamendu funtzioak

Hourly Txintxeta

Orraurly chime provides an audible alert at the top of each hour. There is no on-screen indicator for this feature.

1. From Timekeeping mode, press and hold the EZARTU button (Top Left) until "HOLD TO SET" appears, then "SET TIME 1" or "SET TIME 2".
2. Sakatu MODUA button (Bottom Left) nine (9) times. The display will show "CHIME".
3. Erabili HASI / ZATITU (Top Right) or STOP / RESET (Bottom Right) buttons to toggle the chime "ON" or "OFF".
4. Sakatu EZARTU botoia berresteko eta irteteko.

Button Tones (Beep)

This feature controls the audible beep sound when buttons are pressed.

1. From Timekeeping mode, press and hold the EZARTU button (Top Left) until "HOLD TO SET" appears, then "SET TIME 1" or "SET TIME 2".
2. Sakatu MODUA button (Bottom Left) ten (10) times. The display will show "BEEP".
3. Erabili HASI / ZATITU (Top Right) or STOP / RESET (Bottom Right) buttons to toggle the beep "ON" or "OFF".
4. Sakatu EZARTU botoia berresteko eta irteteko.

Alarms (ALM 1, ALM 2, ALM 3)

The watch has three independent alarms with various repeat options.

1. From Timekeeping mode, press the MODUA button (Bottom Left) repeatedly until "ALM 1", "ALM 2", or "ALM 3" is displayed.
2. To turn an alarm ON/OFF without adjusting its time, use the HASI / ZATITU (Top Right) or STOP / RESET (Bottom Right) buttons. The display will show "DAILY", "WEEKDAYS", "WEEKENDS", or "OFF".
3. To adjust an alarm's time: While on the desired alarm screen, press the EZARTU button (Top Left). The hour will blink.
4. Erabili HASI / ZATITU or STOP / RESET ordua doitzeko botoiak.
5. Sakatu MODUA button to move to minutes. Adjust minutes.
6. Sakatu MODUA button to move to AM/PM indicator. Adjust AM/PM.
7. Sakatu MODUA button to select the repeat option: "DAILY", "WEEKDAYS", or "WEEKENDS".
8. Sakatu EZARTU button to confirm and exit. Adjusting an alarm automatically turns it ON.

An alarm icon will appear on the Timekeeping screen when any alarm is active.

Atzerako kontaketa tenporizadorea

The countdown timer can be set from 1 second up to 24 hours, with options to stop or repeat.

1. From Timekeeping mode, press the MODUA button (Bottom Left) two (2) times to enter Timer mode.
2. To start the timer with its current setting, press the HASI / ZATITU button (Top Right).
3. To stop the timer, press the STOP / RESET button (Bottom Right).
4. To reset the timer to its default value while stopped, press and hold the STOP / RESET botoia.
5. To adjust the timer: While in Timer mode, press the EZARTU button (Top Left). The hour value will blink.
6. Erabili HASI / ZATITU or STOP / RESET ordua doitzeko botoiak.
7. Sakatu MODUA button to move to minutes. Adjust minutes.
8. Sakatu MODUA button to move to seconds. Adjust seconds.
9. Sakatu MODUA button to select the repeat option: "REPEAT" (timer restarts automatically) or "STOP" (timer stops after one cycle).
10. Sakatu EZARTU botoia berresteko eta irteteko.

Kronografoa (kronografoa)

The chronograph measures elapsed time, including split/lap times.

1. From Timekeeping mode, press the MODUA button (Bottom Left) once to enter Chronograph mode. The display will show "CHRONO" and "00.00.00".
2. Sakatu HASI / ZATITU button (Top Right) to start the chronograph.
3. To record a split/lap time while running, press the HASI / ZATITU button. The display will show the split time for 10 seconds, then resume showing the running total.
4. To pause the chronograph, press the STOP / RESET button (Bottom Right). Press HASI / ZATITU berrekiteko.
5. To stop the chronograph, press the STOP / RESET botoia.
6. To reset the chronograph to zero while stopped, press and hold the STOP / RESET botoia.
7. To change the display format (Lap/Split vs. Split/Lap): While in Chronograph mode and reset to zero, press the EZARTU button (Top Left). Use HASI / ZATITU or STOP / RESET to toggle between "LAP SPL" (Lap time on top, Split time on bottom) and "SPL LAP" (Split time on top, Lap time on bottom). Press EZARTU baieztatzeko.

Indiglo Backlight

The Indiglo backlight illuminates the watch face for easy viewargi gutxiko baldintzetan aritzea.

• Sakatu INDIGLO button (Bottom Center) to activate the backlight. It will stay on for approximately 4 seconds.
• If you continue to press other buttons while the backlight is active, it will remain on for 4 seconds after the last button press.
• There are no adjustable settings for backlight brightness or duration.

Mantentzea

• Uraren erresistentzia: This watch is water resistant up to 100 meters. It is suitable for showering, swimming, and snorkeling, but not for scuba diving. Do not press buttons underwater.
• Bateria: The watch uses 1 Lithium Metal battery (included). Battery replacement should be performed by a qualified technician to ensure water resistance is maintained.
• Garbiketa: Clean the watch with a soft, damp oihal. Saihestu produktu kimiko gogorrak edo material urratzaileak.
• Biltegiratzea: Gorde erlojua leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.

Figure 2: Close-up of the watch back, indicating water resistance and battery information.

Arazoak konpontzea

• Pantaila iluna: If the digital display appears dim, the battery may be low and require replacement.
• Ordu/data okerra: Berriro doitzeko, jo ezazu "Ordua eta data ezartzea" atalera.
• Watch Not Functioning: Ensure the battery is properly installed and charged. If issues persist, contact Timex customer support.
• Uraren sarrera: If water appears inside the watch, immediately take it to a qualified watch repair center.

Zehaztapenak

Bermea eta Laguntza

For warranty information, product support, or service inquiries, please refer to the official Timex webwebgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzura. Gorde erosketaren frogagiria berme-erreklamazioetarako.