BN-LINK Countdown Timer Switch (Model CP-U211C) User Manual

Sarrera

Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.

Mesedez, irakurri arretaz eskuliburu hau instalatu eta erabili aurretik, erabilera egokia eta segurtasuna bermatzeko.

Segurtasun informazio garrantzitsua

OHARRA: DESKARKETA ELEKTRIKOA EGITEKO ARRISKUA.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and systems.
• Always turn off power at the circuit breaker or fuse box before installing or servicing the switch.
• This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• For single-pole applications only. Do not use with 3-way or multi-way switches.
• Ziurtatu kable-konexio guztiak ondo isolatuta eta ondo finkatuta daudela.
• Do not exceed the maximum electrical ratings of the device.
• Bolumen eragileatage: 125V, 60 Hz.
• Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.

Konfigurazioa eta instalazioa

This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.

Paketearen edukia:

• BN-LINK Countdown Timer Switch
• Horma-plaka
• Muntatzeko Torlojuak
• Hari intxaurrak

Beharrezko tresnak (ez daude barne):

• Bihurkin (Phillips eta Flathead)
• Hari-ebakitzaileak
• Zinta Elektrikoa
• liburukiatage Probatzailea

Instalazio urratsak:

1. Itzali energia: Bilatu ordezkatzen ari zaren etengailua kontrolatzen duen zirkuitu-hauslea eta itzali ezazu. Egiaztatu korrontea itzalita dagoela bolumen-neurgailu bat erabiliz.tage probatzailea.
2. Kendu etengailu zaharra: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. Identifikatu kableak: Identify the following wires in your wall box:
   • Hari beroa (lerroa): Typically black, brings power from the circuit breaker.
   • Kargatzeko kablea: Typically black, sends power to the light/fan.
   • Hari neutroa: Typically white. A neutral wire is REQUIRED for this switch.
   • Lurreko kablea: Normalean kobre berdea edo biluzik.
4. Wire the New Switch: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
   • Konektatu Hari Beltza from the timer switch to the Hot Wire (Line) hormako kaxatik.
   • Konektatu Hari Gorria from the timer switch to the Karga Hari hormako kaxatik.
   • Konektatu Hari Zuria from the timer switch to the Hari Neutroa hormako kaxatik.
   • Konektatu Hari Berdea from the timer switch to the Lurreko alanbrea hormako kaxatik.
5. Secure the Switch: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
6. Instalatu horma-plaka: Attach the provided wall plate over the switch.
7. Berrezarri boterea: Piztu berriro korrontea etengailu elektrikoan.
8. Proba funtzionamendua: Test the timer switch to ensure it functions correctly.

Irudia: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."

Funtzionamendu-argibideak

The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

Irudia: Aurrealdea view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.

Botoiaren funtzioak:

• Pizteko botoia (goian): This is the main ON/OFF button.
  • Press once to turn the connected device (light/fan) ON indefinitely.
  • Press again to turn the connected device OFF.
  • This button can also override any active countdown timer, turning the device OFF immediately.
• Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
  • Press any of these buttons to turn the connected device ON for the selected duration.
  • The device will automatically turn OFF once the countdown expires.
  • An LED indicator next to the selected time will illuminate to show the active countdown.

ExampErabilera:

To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.

Aplikazio polifazetikoak

The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

Irudia: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.

• Bainugelak: Control exhaust fans to reduce humidity and prevent mold growth.
• Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
• Garajeak: Manage lighting or ventilation systems.
• Garbitegiak: Control exhaust fans or lighting.
• Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.

This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.

Mantentzea

The BN-LINK Countdown Timer Switch requires minimal maintenance.

• Garbiketa: To clean the surface of the switch, gently wipe with a soft, damp oihal. Ez erabili garbitzaile urratzailerik, disolbatzailerik edo produktu kimiko gogorrik, hauek akabera edo barneko osagaiak kaltetu baitezakete.
• Ikuskapena: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• Erabiltzaileak ez du zerbitzurik gabeko piezarik: Ez dago erabiltzaileak konpondu beharreko piezarik etengailuaren barruan. Ez saiatu unitatea zeuk irekitzen edo konpontzen.

Arazoak konpontzea

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.

Zehaztapenak

Irudia: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).

Bermea eta laguntza

BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.

Please have your model number (CP-U211C) and purchase date available when contacting support.

Harremanetarako informazioa:

• Refer to the BN-LINK official webgunea edo produktuaren ontzia kontaktu datu eguneratuenak lortzeko.
• Online support may be available through the BN-LINK brand store on Amazon or their official webgunea.