Sarrera
This manual provides essential information for the safe and effective use of your new replacement bulbs. Please read this manual thoroughly before installation and retain it for future reference.
These bulbs are designed as a direct replacement for Satco A3662 bulbs, offering 60W power at 130V.
Produktua amaituview
Image: A clear, flame-tip light bulb with a standard screw base. This bulb is designed for general illumination purposes.
The product consists of two replacement bulbs, specifically designed to be compatible with Satco A3662 models. They feature a CA10 bulb shape and operate at 60 watts and 130 volts, providing reliable illumination.
Konfigurazioa eta Instalazioa
- Segurtasuna lehenik: Before attempting installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Baimendu hoztea: If replacing an existing bulb, allow the old bulb to cool completely before handling to prevent burns.
- Kendu bonbilla zaharra: Carefully unscrew the old bulb from the socket by turning it counter-clockwise.
- Txertatu bonbilla berria: Gently screw the new replacement bulb into the socket by turning it clockwise until it is snug. Do not overtighten.
- Berrezarri boterea: Once the new bulb is securely installed, restore power to the fixture.
- Proba: Piztu argiaren etengailua bonbilla behar bezala funtzionatzen duela baieztatzeko.
Oharra: Always handle light bulbs by their base to avoid transferring oils from your skin to the glass, which can reduce bulb life.
Funtzionamendu-argibideak
These bulbs are designed for standard on/off operation via a light switch. They do not require any special operating procedures beyond typical light bulb usage.
- Ensure the bulb is installed in a compatible fixture with the correct voltage (130V).
- The bulbs are rated for 60W. Do not exceed the maximum wattage rating of your light fixture.
- These bulbs are suitable for indoor use.
Mantentzea
These replacement bulbs are designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Garbiketa: Before cleaning, ensure the power is off and the bulb is cool. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Ordezkoa: Replace bulbs when they burn out. The average life of these bulbs is approximately 5000 hours.
- Biltegiratzea: Store unused bulbs in their original packaging in a cool, dry place to protect them from damage.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Bonbilla ez da pizten. | Lanabeserako botererik ez. Bonbilla ez dago behar bezala torlojututa. Bonbillaren bizitza-amaiera iritsi da. | Egiaztatu etengailua/fusiblea. Ziurtatu bonbilla ondo estututa dagoela. Ordeztu bonbilla berri batekin. |
| Bonbillak dir-dir egiten du. | Konexio soltea. Argi-erregulatzaile bateraezina (hala badagokio). | Estutu bonbilla entxufean. Ensure fixture is not on a dimmer if bulb is non-dimmable. |
| Bonbila azkar erretzen da. | Gehiegizko bolumenatage. Frequent on/off cycling. Aireztapen eskasa instalazioan. | Egiaztatu finkapenaren bolumenatage. Murriztu aldaketa-maiztasuna. Ensure adequate airflow around bulb. |
Zehaztapenak
| Atributua | Balioa |
|---|---|
| Produktu Mota | Ordezko bonbilla |
| Bateragarritasuna | Satco A3662 |
| Wattage | 60W |
| liburukiatage | 130V |
| Bonbilla Forma | CA10 |
| Batez besteko Bizitza | 5000 ordu |
| Baldintza | Berria |
| Bonbilla Oinarria | Bridatua |
| Barruko/Kanpoko erabilera | Barruan |
Bermea eta Laguntza
Information regarding specific warranty terms for this product is not provided in the available data. For any product support or warranty inquiries, please contact the seller or manufacturer directly through the platform where the purchase was made.
Fabrikatzailea: Generikoa
ASIN: B0CX8MSH8W