Ortis Hi-Lo Sump Pump Switch Controller KJ-033 User Manual

1. Sarrera

The Ortis Hi-Lo Sump Pump Switch Controller KJ-033 is an electronic adjustable float switch designed for automatic water level management in various applications such as sewage pits, fish tanks, and water tanks. It features stainless steel anti-corrosion dual sensors and supports both 220V and 110V AC power inputs. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Segurtasun informazioa

Mesedez, irakurri arretaz segurtasun-jarraibide guztiak instalatu eta erabili aurretik. Argibide hauek ez jarraitzen badituzu, deskarga elektrikoak, sua edo lesio larriak gerta daitezke.

• Arrisku elektrikoa: Ensure the power supply is disconnected before performing any installation, maintenance, or troubleshooting.
• liburukiatage Bateragarritasuna: Egiaztatu elikadura hornidura boltage matches the controller's specifications (220V/110V AC).
• Lurreratze egokia: Always connect the device to a properly grounded outlet.
• Uraren esposizioa: Do not immerse the controller unit in water. The controller unit is designed to be mounted above the water level.
• Pertsonal kualifikatua: Installation and electrical connections should be performed by qualified personnel if you are unsure.
• Ingurumen-baldintzak: Do not operate the device in explosive atmospheres or where flammable liquids or gases are present.

3. Produktuaren ezaugarriak

The Ortis KJ-033 controller offers several features for reliable water level management:

• Dual Stainless Steel Sensors: Anti-corrosion sensors for accurate water level detection.
• Sentsorearen eremu erregulagarria: Sensors can be adjusted from 1/2 inch to 20 inches to define high and low water levels.
• Hainbat funtzionamendu modu: Supports Drain Mode (for emptying) and Water Mode (for filling).
• LED adierazleak: Visual feedback for power, load status, and alarm conditions.
• Gainkarga babesa: Integrated protection for connected pumps.
• Mutu funtzioa: Allows silencing of the alarm.
• Aplikazio zabala: Suitable for sewage pits, fish tanks, water tanks, and other water management systems.

3.1. irudia: Ortis Water Level Controller Overview Ezaugarri Nagusiekin.

3.2. irudia: Various Application Scenarios for the Controller.

4. Konfigurazioa eta instalazioa

Proper installation is crucial for the reliable operation of the controller.

4.1 Controller Mounting

The controller unit should be mounted in a dry location, above the maximum water level, and within reach of a grounded power outlet.

• Torlojuen muntaketa: Use appropriate screws and anchors to secure the controller to a wall or stable surface through the mounting tabs.
• Bentosa muntatzea: For temporary or non-permanent installations, a suction cup can be used to attach the controller to a smooth, clean surface.

4.1. irudia: Controller Installation Methods.

4.2 Sensor Installation and Adjustment

The dual sensors detect the high and low water levels. Their position determines the operating range of your pump.

• Sentsoreen kokapena: Position the sensors vertically in the water, ensuring they are securely fastened and will not move. The lower sensor defines the 'low' water level, and the upper sensor defines the 'high' water level.
• Egokigarria: The sensors can be adjusted along their cables to set the desired water level range, from 1/2 inch to 20 inches apart. Ensure both sensors are submerged at the desired 'on' level and the lower sensor is exposed at the desired 'off' level for drain mode, or vice versa for water mode.
• Kableen kudeaketa: Route sensor cables to prevent entanglement or damage.

4.2. irudia: Adjustable Sensor Installation.

4.3 Konexio elektrikoa

• Entxufea: Plug the controller's power cord into a grounded 220V or 110V AC outlet.
• Ponparen konexioa: Plug your sump pump or other load device into the outlet on the front of the controller. Ensure the pump's power requirements do not exceed the controller's output capacity (15A, up to 2HP).

4.3. irudia: Example Sump Pit Installation.

5. Funtzionamendu-argibideak

The controller features a simple interface for selecting operating modes and managing alarms.

5.1. irudia: Kontrol-panela amaitu daview.

5.1 Modu hautaketa

Use the 'Drain' and 'Water' buttons to select the desired operating mode:

• Hustuketa modua: (LED indicator 'Drain' illuminates) In this mode, the controller activates the pump when the water level reaches the upper (high) sensor and deactivates it when the water level drops below the lower (low) sensor. This mode is typically used for emptying sewage pits or sumps.
• Ur modua: (LED indicator 'Water' illuminates) In this mode, the controller activates the pump when the water level drops below the lower (low) sensor and deactivates it when the water level reaches the upper (high) sensor. This mode is typically used for replenishing water in fish tanks or water tanks.

5.2 Power and Operation Switch

The main switch controls the power and operational state of the connected load:

• AUTOA: (LED indicator 'AUTO' illuminates) The controller operates automatically based on the selected mode (Drain or Water) and sensor readings.
• DESaktibatuta: (LED indicator 'OFF' illuminates) The connected pump is turned off, regardless of water levels.
• ON: (LED indicator 'ON' illuminates) The connected pump is continuously turned on, regardless of water levels. Use this for manual override or continuous operation.

5.3 Mutu funtzioa

Press the 'Mute' button to silence any active alarms. The 'DisAlarm' LED will illuminate when the alarm is muted.

5.2. irudia: Operational Logic in Drain Mode (Sewage Pit Example).

6. Mantentzea

Regular maintenance ensures the longevity and reliable operation of your Ortis controller.

• Sentsoreen garbiketa: Periodically inspect and clean the stainless steel sensors to remove any buildup of debris, algae, or mineral deposits that could affect their accuracy. Disconnect power before cleaning.
• Kableen ikuskapena: Check all cables and connections for signs of wear, damage, or corrosion. Replace any damaged components immediately.
• Kontrolatzaile Unitatea: Keep the controller unit clean and dry. Avoid exposing it to direct sunlight or extreme temperatures.
• Proba funtzionamendua: Periodically test the controller's operation by manually raising or lowering water levels to ensure the pump activates and deactivates as expected in the selected mode.

7. Arazoak

Ikusi beheko taula arazo ohikoenak eta haien irtenbideak ikusteko.

8. Zehaztapenak

8.1. irudia: Controller Dimensions.

9. Bermea eta Laguntza

For warranty information and technical support, please refer to the product packaging or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.

Fabrikatzailea: FJKJ INC.