Erabiltzailearen eskuliburua

1. Produktua amaitu daview

The NVR302A-16-4KS2/L is a Lite series Network Video Recorder designed for high-performance surveillance applications. It supports 4K resolution processing and H.265 encoding technology, offering excellent video quality and efficient storage. This NVR can function as edge, central, or backup storage, providing intuitive remote management and control. Its cost-effective and easy-to-install design makes it suitable for various environments, including public safety, transportation, and educational institutions. The NVR is compatible with numerous third-party devices and supports ONVIF 2.4 protocol for broad interoperability with IP cameras.

Ezaugarri nagusiak:

• New UI interface for an easier operation experience.
• Supports Smart H.265 / Smart H.264 video compression.
• P2P remote surveillance and video playback on mobile devices.
• 16-channel @ 720P (30FPS) self-adaptive decoding capability.
• Compatible with mainstream cameras supporting ONVIF and RTSP protocols.
• VGA/HDMI simultaneous video output, with a maximum HDMI resolution of 4K.
• Enables remote configuration and management of IPCs, including parameter settings, information acquisition, and batch upgrades for IPCs of the same model.
• Supports DHCP, HTTP, NTP, and DDNS protocols.

2. Paketearen edukia

Please check the package contents carefully upon unpacking. If any items are missing or damaged, contact your vendor immediately.

• Network Video Recorder (NVR) Unit
• Elikatze-moldagailua
• USB sagua
• SATA Cables (for optional HDD installation)
• Hasierako gida azkarra
• Note: This model does not include a pre-installed Hard Disk Drive (HDD). An HDD must be purchased separately for video storage.

3. Produktuaren osagaiak eta interfazeak

3.1 Aurreko panela

3.1. irudia: Aurrealdea view of the NVR, showing indicator lights and control buttons.

The front panel of the NVR features various indicator lights for power, HDD activity, and network status, along with control buttons for navigation and quick operations. These indicators provide real-time status updates of the device.

3.2 Atzeko panela

3.2. Irudia: Atzealdea view of the NVR, illustrating all input and output ports.

The rear panel provides all necessary connection ports for power, video output, audio, network, and alarm inputs/outputs. Refer to the diagram above for the location of each port.

• 1. Etengailua: Toggles the NVR power On/Off.
• 2. DC 12V Power Input: Emandako energia-egokitzailera konektatzen da.
• 3. Network Port: RJ45 port for connecting to your local area network (LAN).
• 4. VGA Port: Monitore batera konektatzeko bideo grafikoen matrizearen irteera.
• 5. Mic Out: Audio output for connecting to speakers or an audio system.
• 6. Mic In: Audio input for connecting a microphone.
• 7. HDMI Port: High-Definition Multimedia Interface output for connecting to a monitor or TV, supporting up to 4K resolution.
• 8. USB ataka: For connecting a USB mouse, external storage, or for firmware upgrades.
• 9. Alarm Input/Output: Terminal block for connecting external alarm devices (sensors, sirens).

4. Hasierako konfigurazioa

4.1 Desontziratzea eta ikuskatzea

1. Carefully remove the NVR from its packaging.
2. Inspect the unit for any signs of physical damage.
3. Verify all accessories listed in Section 2 are present.

4.2 Hardwarearen instalazioa

1. HDD Installation (Optional): If you plan to install an internal HDD, power off the NVR. Open the NVR casing, mount the HDD using the provided screws, and connect the SATA power and data cables. Close the casing segurtasunez.
2. Konektatu pantaila: Konektatu monitore bat NVRaren HDMI edo VGA atakara.
3. Sagua konektatu: Konektatu USB sagua NVR-aren USB ataka batera.
4. Konektatu sarea: Connect an Ethernet cable from the NVR's Network Port to your router or network switch.
5. Konektatu energia: Connect the DC 12V power adapter to the NVR's power input and then plug it into a power outlet.
6. Piztu: Flip the Power Switch to the "ON" position.

4.3 First-Time Boot and Configuration

Upon the first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to:

• Set up a strong password for the admin account.
• Konfiguratu data eta orduaren ezarpenak.
• Konfiguratu sarearen parametroak (DHCP gomendatzen da etxeko sare gehienentzat).
• Initialize the HDD (if installed).
• Bilatu and add IP cameras to the NVR.

5. Funtzionamendu-argibideak

5.1 Erabiltzaile interfazearen nabigazioa

Navigate the NVR's graphical user interface (GUI) using the connected USB mouse. Right-click anywhere on the live view screen to access the main menu. The main menu provides access to Live View, Playback, System Settings, Alarm, Network, Storage, and other configurations.

5.2 Bizi View eta Erreprodukzioa

• Zuzenean View: Hautatu "Zuzeneko" View" from the main menu to see real-time feeds from connected cameras. You can switch between single-channel and multi-channel views.
• Erreprodukzioa: Select "Playback" from the main menu. Choose the camera, date, and time to review foo grabatuatage. Use the timeline and control buttons (play, pause, fast forward, rewind) to navigate recordings.

5.3 Grabaketa ezarpenak

Access "Recording" settings from the main menu to configure recording schedules, motion detection, and other event-triggered recordings. You can set continuous recording, scheduled recording, or event-based recording for each camera.

5.4 Sarearen konfigurazioa

Under "Network" settings, you can configure IP addresses, port forwarding (if required for remote access without P2P), DDNS, and other network-related parameters. Ensure the NVR has a stable network connection for optimal performance and remote access.

5.5 Urruneko sarbidea (P2P)

The NVR supports P2P (Peer-to-Peer) for easy remote access via a mobile application. Download the official mobile app (refer to the Quick Start Guide for app name) on your smartphone or tablet. Scan the NVR's QR code (usually found in the network settings or on a sticker on the device) to add the device and view live feeds or playback recordings remotely.

6. Mantentzea

6.1 Arreta orokorra

• Keep the NVR in a cool, dry, and well-ventilated area.
• Avoid exposing the unit to direct sunlight, high temperatures, or excessive humidity.
• Garbitu kanpoaldea zapi leun eta lehor batekin. Ez erabili garbitzaile likidorik edo aerosolik.
• Ensure proper airflow around the unit to prevent overheating.

6.2 Firmware eguneraketak

Aldian-aldian egiaztatu fabrikatzailearen ofiziala website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the instructions provided with the firmware update package carefully to avoid damaging the device.

6.3 Datuen babeskopia

Egin bideo garrantzitsuen babeskopiak aldizkatage to external storage devices (e.g., USB flash drive, network storage) to prevent data loss. The NVR's interface provides options for exporting recorded video.

7. Arazoak

This section addresses common issues you might encounter. For more complex problems, please refer to the manufacturer's online support or contact technical assistance.

• Ez dago bideo irteerarik monitorean:
  • Check if the NVR is powered on and the power indicator light is active.
  • Ziurtatu HDMI/VGA kablea ondo konektatuta dagoela NVRra eta monitorera.
  • Egiaztatu monitorearen sarrera-iturri zuzena (HDMI/VGA) dela konfiguratuta.
  • Try a different monitor or cable to rule out faulty display equipment.
• Ezin da sarera konektatu:
  • Ensure the Ethernet cable is properly connected to the NVR and the router/switch.
  • Check the network indicator lights on the NVR and the router.
  • Verify network settings in the NVR (IP address, subnet mask, gateway, DNS). Ensure DHCP is enabled on your router or manually assign a static IP within your network range.
  • Restart the NVR and your router.
• Kamerak ez dira bistaratzen:
  • Ensure IP cameras are powered on and properly connected to the network.
  • Verify that the cameras are compatible with the NVR (ONVIF 2.4 protocol support).
  • Check the IP addresses of the cameras and ensure they are on the same network segment as the NVR.
  • Use the NVR's camera management interface to search for and add cameras.
  • Ensure camera credentials (username/password) are correct.
• No Recording/Playback Issues:
  • Verify that an HDD is installed and properly initialized by the NVR.
  • Check the HDD status in the NVR's storage settings; ensure it's not full or faulty.
  • Confirm that recording schedules are properly configured for the desired cameras.
  • Ensure motion detection or other event triggers are correctly set up if using event-based recording.

8. Zehaztapen Teknikoak

9. Bermea eta Laguntza

This Diamond NVR product comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or visit the official Diamond product support website. For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact the vendor or manufacturer's customer support directly. Keep your purchase receipt as proof of purchase for warranty claims.