Qian 80mm Thermal Receipt Printer User Manual

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Qian 80mm Thermal Receipt Printer, Model T80UL-RI-02. Please read this manual thoroughly before using the printer to ensure proper functionality and longevity.

2. Paketearen edukia

Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela. Elementuren bat falta bada edo hondatuta badago, jarri harremanetan zure saltzailearekin.

• Qian 80mm Thermal Receipt Printer
• Standard Power Adapter (with power line)
• USB kablea
• CD-ROM (for drivers and manual)
• Erabiltzailearen eskuliburua (digitala)

Image: Qian 80mm Thermal Receipt Printer, USB cable, and power adapter.

3. Produktua amaitu daview

3.1 Aurrealdea View

Irudia: Aurrealdea view of the printer, showing the paper output slot and indicator lights.

3.2 Atzekoa View (Portuak)

Irudia: Atzealdea view of the printer, highlighting the USB, LAN (Ethernet), and power input ports.

4. Konfigurazioa

4.1 Paper termikoa kargatzea

1. Press the 'OPEN' button (usually orange) on the side of the printer to open the top cover.
2. Sartu paper termikoaren erroilua konpartimentuan, papera behetik sartzen dela eta aurreko ertza zuzen dagoela ziurtatuz.
3. Atera paper zati txiki bat ebakitzailetik.
4. Itxi goiko estalkia ondo, bere lekuan klik egin arte.

Image: Printer with the top cover open, showing the paper roll compartment.

4.2 Inprimagailua konektatzea

4.2.1 Energia-konexioa

1. Konektatu korronte-egokitzailea inprimagailuaren sarrera-atakara.
2. Entxufatu korronte-egokigailua entxufe elektriko egoki batean.
3. Turn on the printer using the power switch, typically located on the side or rear.

4.2.2 USB konexioa

1. Connect one end of the USB cable to the printer's USB port.
2. Konektatu USB kablearen beste muturra ordenagailuko USB ataka erabilgarri batera.

4.2.3 LAN (Ethernet) Connection

1. Connect an Ethernet cable to the printer's LAN port.
2. Konektatu Ethernet kablearen beste muturra zure sareko bideratzaile edo etengailura.
3. Ensure your computer is on the same network as the printer.

4.3 Gidariaren instalazioa

Drivers are required for your operating system to communicate with the printer. The necessary drivers are typically provided on the included CD-ROM or can be downloaded from the manufacturer's support webgunea.

4.3.1 Leihoak

1. Insert the driver CD-ROM or open the downloaded driver package.
2. Run the setup executable (e.g., `setup.exe` or `install.exe`).
3. Follow the on-screen instructions to complete the installation. Select the correct printer model and connection type (USB or LAN).

4.3.2 MacOS

1. Open the downloaded driver package (usually a .dmg file).
2. Exekutatu instalatzailea eta jarraitu argibideei.
3. After installation, go to System Settings > Printers & Scanners, click the '+' button, and add the printer.

4.3.3 Linux

Linux drivers are typically provided as packages or source code. Refer to the specific instructions within the Linux driver package for installation. Common methods involve using package managers (e.g., APT, YUM) or compiling from source.

5. Funtzionamendu-argibideak

5.1 Piztu/Itzali

• To power on, flip the power switch to the 'ON' position. The power indicator light will illuminate.
• Itzaltzeko, jarri etengailua 'OFF' posiziora.

5.2 Oinarrizko inprimaketa

Once the printer is connected and drivers are installed, you can print receipts from your POS software or application. Ensure the printer is selected as the default or target printer in your software settings.

5.3 Self-Test Page

A self-test page can be printed to verify printer functionality, check settings, and confirm paper loading.

1. Ensure the printer is powered off and paper is loaded.
2. Press and hold the 'FEED' button.
3. While holding 'FEED', turn on the printer.
4. Release the 'FEED' button once the printer starts printing the self-test page.

Image: Printer producing a self-test receipt, displaying printer information and QR code.

5.4 ESC/POS Commands

This printer supports the ESC/POS command set, allowing for advanced control over printing functions, such as font selection, barcode printing, and image printing. Refer to the ESC/POS programming guide (usually found on the driver CD-ROM or support website) for detailed command specifications.

6. Mantentzea

6.1 Inprimatze-burua garbitzea

Regular cleaning of the print head ensures optimal print quality and extends printer life. Use a soft, lint-free cloth dampened with isopropyl alcohol. Gently wipe the print head surface. Ensure the printer is powered off and cooled down before cleaning.

6.2 Paper-erroilua ordezkatzea

Follow the steps outlined in Section 4.1 when the paper roll is depleted. Always use high-quality thermal paper to prevent damage to the print head and ensure clear prints.

7. Arazoak

Atal honek zure inprimagailuarekin izan ditzakezun arazo ohikoenei buruzko informazioa ematen du.

8. Zehaztapenak

9. Bermea eta Laguntza

This product comes with a digital warranty policy. Please refer to the documentation provided on the CD-ROM or the manufacturer's webwebgunean bermearen baldintza eta zehaztapen zehatzak ikusteko.

9.1 Laguntza Teknikoa

For technical assistance, driver downloads, or further inquiries, please visit the Qian support website or contact the distributor in your region:

• AEB: VADETO GROUP, 10065 Via de la Amistad A1, San Diego, CA. US 92154
  Tel.: +1 (888) 499-8103
  www.qian.solutions
• MEXICO: Calz. José Guadalupe Gallo #8490-A, Col. Agua Blanca Industrial, Zapopan, Jalisco, México
  Tel.: +52 33 1078 3404
  www.qian.mx
• ESPAINIA: CL Manuel Toyar Nº 16, 28034 Madrid, España
  Tel.: +34 911 630 942
  www.qian.es

You may also find additional product information and support resources by scanning the QR code provided on the product packaging or visiting: https://flowcode.com/p/iwe9nNJEM

Image: Back of the product box with distribution contacts and product information QR code.