1. Sarrera
This manual provides essential information for the safe installation, operation, and maintenance of your Onforu 100W LED Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Segurtasun informazioa
OHARRA: Deskarga elektrikoaren arriskua. Deskonektatu fusible edo etengailu elektrikotik instalazioa edo mantentze-lanak egin aurretik.
- Ensure the power supply is turned off before attempting any installation, maintenance, or adjustment.
- Instalazioa elektrizista kualifikatu batek edo elektrizitate ezagutzak dituen pertsona batek egin behar du.
- This product is designed for outdoor use and is IP65 waterproof rated. However, ensure all connections are properly sealed to maintain water resistance.
- Do not install near flammable materials or in areas with explosive atmospheres.
- Ez begiratu zuzenean LED argi-iturria piztuta dagoenean, begietan kalteak eragin ditzakeelako.
- Ziurtatu muntatzeko gainazalak euskarriaren pisua eutsi dezakeela.
3. Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- LED Security Light Fixture (Model BDB100G-3)
- Muntatzeko hardwarea (torlojuak, kable-azkoinak)
- Argibide eskuliburua
4. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Modelo zenbakia | BDB100G-3 |
| Wattage | 100W |
| Distira | 9000 lumen |
| Kolore Tenperatura | 6000K (eguneko argia) |
| liburukiatage | 120 Volt |
| Mugimendu-sentsorearen angelua | 180° |
| Mugimendua detektatzeko tartea | 16.4 ft - 72 ft (5m - 22m) |
| Lighting Time Adjustment | 10 segundo - 7 minutu |
| Uraren Erresistentzia Balorazioa | IP65 |
| Materiala | Die-cast Aluminum, Plastic |
| Neurriak (L x W x H) | 15.3" x 8.2" x 4.7" (38.8 cm x 20.8 cm x 11.9 cm) |
| Pisua | 4.4 lb (2 kg) |
| Muntatze Mota | Wall Mount & Soffit Mount |
| Ideal Mounting Height | 10 ft - 16.4 ft (3m - 5m) |
5. Konfigurazioa eta instalazioa
Before installation, ensure the power is OFF at the circuit breaker.
5.1 Osagaiak gainetikview
5.1. irudia: Lehertua view of the security light, highlighting the 100W LED beads and high-precision light transmission design.
5.2 Gailua muntatzea
- Prestatu Muntatzeko Azalera: Choose a suitable location, ideally between 10 ft and 16.4 ft (3m - 5m) from the ground, ensuring the motion sensor has an unobstructed view nahi den detekzio-eremuaren.
- Lotu Muntatzeko euskarria: Secure the provided mounting bracket to the junction box using the included screws.
- Kableatu konexioak: Connect the household wiring to the fixture's wires. Typically, this involves:
- Beltza (Zuzenean) Beltzera (Zuzenean)
- Zuritik (Neutrora) Zuritik (Neutrora)
- Green/Bare Copper (Ground) to Green (Ground)
- Ziurtatu instalazioa: Carefully align the fixture with the mounting bracket and secure it in place. Ensure no wires are pinched.
Image 5.2: Installation diagram illustrating the steps to mount the security light to a wall or soffit.
Image 5.3: Detailed diagram showing the physical dimensions of the light heads and base, along with the standard three-wire electrical connections.
5.3 Adjusting Light Heads and Sensor
The three light heads can be adjusted independently to cover a wide area. The motion sensor can also be angled for optimal detection.
Image 5.4: The adjustable design allows for precise aiming of the light heads and motion sensor to cover a 270-degree detection zone.
6. Funtzionamendu-argibideak
Once installed and power is restored, the light will enter a warm-up period (approximately 30-60 seconds) during which it may turn on and off. After this, it will operate according to the sensor settings.
6.1 Mugimendu-sentsorearen ezarpenak
The motion sensor has three adjustable dials:
Image 6.1: The motion sensor features three adjustable dials for customizing detection parameters.
- DISTANCE (SENS): Adjusts the motion detection sensitivity and range from 16.4 ft to 72 ft. Turn clockwise for higher sensitivity/longer range, counter-clockwise for lower sensitivity/shorter range.
- ORDUA: Sets how long the light remains on after motion is detected, ranging from 10 seconds to 7 minutes. Turn clockwise for longer illumination, counter-clockwise for shorter.
- LUX (Day/Night Mode): Determines the ambient light level at which the sensor becomes active.
- Eguneko modua (Eguzkiaren ikonoa): Mugimendu detekzioak egunez zein gauez funtzionatzen du.
- Gaueko modua (Ilargiaren ikonoa): Mugimendu detekzioak gauez edo argi gutxiko baldintzetan bakarrik funtzionatzen du.
6.2 Errendimendu optimoa
Image 6.2: The motion sensor provides versatile detection for areas like driveways, with a wide sensing angle.
Image 6.3: The light provides super bright and ultra-wide illumination, covering a significant area.
7. Mantentzea
The Onforu security light is designed for minimal maintenance. Regular cleaning can help maintain optimal performance.
7.1 Garbiketa
- Ensure the power is OFF before cleaning.
- Garbitu aparatua zapi leun batekin,amp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik, akabera edo lentea kaltetu baitezakete.
- Mugimendu-sentsorearen lentea garbi eta oztoporik gabe mantendu (adibidez, zikinkeria, armiarma-harriak...).webs) to ensure proper operation.
7.2 Eguraldiarekiko erresistentzia
Image 7.1: The IP65 waterproof rating ensures the light functions reliably in rain, sleet, snow, and sun.
8. Arazoak
Segurtasun-argiarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da pizten. | Ez dago elikadura hornidurarik. LUX setting is too low (Night Mode during daytime). Mugimendu-sentsorea oztopatua edo akastuna. | Egiaztatu zirkuitu-hauslea eta kableatu-konexioak. Adjust LUX dial to Day Mode (Sun icon) for testing. Clear any obstructions from the sensor. Ensure sensor is aimed correctly. |
| Argia etengabe pizten da. | Mugimendu jarraitua detekzio-eremuan. DENBORA ezarpena luzeegia da. Sentsorearen matxura. | Ensure no constant movement (e.g., tree branches, pets) is triggering the sensor. Doitu DENBORAren markagailua iraupen laburrago batera. Arazoak jarraitzen badu, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. |
| Light turns on too frequently or not enough. | DISTANCE (SENS) setting is too high/low. Sensor placement or angle is not optimal. Environmental factors (e.g., heat sources, reflective surfaces). | Adjust DISTANCE dial to desired sensitivity. Reposition or re-angle the sensor to cover the intended area and avoid unwanted triggers. Ensure the sensor is not pointed at direct heat sources or highly reflective surfaces. |
| Argi-irteera ahula edo ez-konsistentea da. | Potentzia gorabehera. Damaged LED beads. | Ensure stable power supply. If individual LED beads are visibly not working, the unit may require replacement. |
| Fixture feels wobbly after installation. | Muntaketa soltea. Main connection to base plate not fully secured. | Ensure all mounting screws are tightened. Verify the main light assembly is firmly attached to the base plate. |
9. Bermea
This Onforu product is covered by a 2 urteko berme mugatua erosketa-datatik aurrera. Berme honek materialen eta fabrikazioaren akatsak estaltzen ditu erabilera normalaren pean. Ez ditu estaltzen instalazio desegokiaren, istripuaren, erabilera okerraren, gehiegikeriaren edo baimenik gabeko aldaketen ondoriozko kalteak.
Mesedez, gorde zure erosketa-froga berme-erreklamazioetarako.
10. Bezeroarentzako arreta
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Onforu customer support through the retailer's platform or visit the official Onforu webharremanetarako informazioa lortzeko gunea.
Lineako laguntza: Visit the Onforu Store on Amazon