TONOR TX510 Audio Interface User Manual

1. Sarrera

The TONOR TX510 Audio Interface is a versatile USB audio mixer designed for high-fidelity recording, podcasting, streaming, and ASMR. It features two XLR/6.35mm combo inputs, individual gain controls, real-time monitoring, and vibrant RGB lighting, providing a comprehensive solution for content creators and musicians.

This manual provides detailed instructions for setting up, operating, and maintaining your TX510 Audio Interface to ensure optimal performance and longevity.

Figure 1: TONOR TX510 Audio Interface

2. Segurtasun informazioa

• Ez jarri gailua uraren edo gehiegizko hezetasunaren eraginpean.
• Saihestu gailua bero-iturrietatik gertu edo eguzki-argia zuzenean jartzen.
• Use only the provided USB cable for power and data connection.
• Ez saiatu gailua zeuk desmuntatzen edo konpontzen. Mantendu mantentze-lan guztiak langile kualifikatuen esku.
• Ziurtatu gailua behar bezala aireztatuta dagoela inguruan funtzionamenduan zehar.
• When connecting microphones requiring phantom power, ensure the 48V button is pressed only when a condenser microphone is connected.

3. Paketearen edukia

Please check the package contents upon opening. If any items are missing or damaged, contact TONOR customer support.

• TONOR TX510 Audio Interface
• USB kablea (C motatik A motara)
• Erabiltzailearen eskuliburua

4. Produktua amaitu daview

4.1 Aurreko paneleko kontrolak eta sarrerak

2. irudia: aurreko panelaren diseinua

1. MIKROFONO/LERRO 1. eta 2. sarrerak: Combo jacks for connecting XLR microphones or 6.35mm (1/4 inch) instrument/line-level cables.
2. GAIN Knobs (1 & 2): Adjust the input sensitivity for MIC/LINE 1 and 2. Features a cycle effect light ring (7 colors) and gain indicators (green for proper volume, red for too loud).
3. 48V Buttons (1 & 2): Kondentsadore-mikrofonoentzako +48V-ko phantom elikadura aktibatzen du.
4. INST Buttons (1 & 2): Switches between instrument and vocal input modes, optimizing gain and input impedance.
5. IRTEERAKO botoia: Controls the overall output volume to your studio monitors.
6. HEADPHONE Output: 6.35mm (1/4 inch) stereo jack for connecting headphones.
7. HEADPHONE Volume Knob: Entzungailuen irteeraren bolumena doitzen du.
8. LOOP BACK Button: Mixes computer audio into the ongoing recording audio in real-time.
9. MONO botoia: Toggles between mono and stereo output.
10. MONITOR ZUZENAREN botoia: Enables zero-latency monitoring of your input signals.

4.2 Atzeko panelaren konexioak

3. irudia: Atzeko panelaren diseinua

1. POWER switch: Gailua pizten edo itzaltzen du.
2. USB 5V ataka: USB Type-C port for connecting to your computer for power and data transfer.
3. LINE OUTPUTS (L/R): 6.35mm (1/4 inch) jacks for connecting to studio monitors or other audio playback devices.

5. Konfigurazioa

5.1 Ordenagailu batera konektatzea

The TX510 is a plug-and-play device and typically does not require special drivers for Windows or macOS. It functions as a standard USB audio device.

1. Ensure the TX510's POWER switch is in the OFF position.
2. Connect the provided USB cable from the USB 5V port on the rear of the TX510 to an available USB port on your computer.
3. Flip the POWER switch to the ON position. The device will power on and be recognized by your operating system.
4. Select the TONOR TX510 as your input and output audio device in your computer's sound settings and your preferred Digital Audio Workstation (DAW) or recording software.

5.2 Mikrofonoak eta instrumentuak konektatzea

4. irudia: Konexio-diagrama

• XLR Microphones: Connect your XLR microphone cable to either MIC/LINE 1 or MIC/LINE 2 combo input. If using a condenser microphone, press the corresponding 48V button to supply phantom power.
• Instruments (e.g., Guitar): Connect your 6.35mm (1/4 inch) instrument cable to either MIC/LINE 1 or MIC/LINE 2 combo input. Press the corresponding INST button to optimize the input for instruments.

5.3 Connecting Headphones and Monitors

• Entzungailuak: Plug your 6.35mm (1/4 inch) headphones into the HEADPHONE output jack on the front panel.
• Estudioko monitoreak: Connect your studio monitors to the LINE OUTPUTS (L/R) on the rear panel using 6.35mm (1/4 inch) cables.

6. Funtzionamendua

6.1 Adjusting Input Gain

Figure 5: Gain and Volume Controls

Use the GAIN knobs for MIC/LINE 1 and 2 to adjust the input level of your microphone or instrument. The light ring around the knob indicates the signal level:

• Soinurik ez: Argirik ez.
• Proper Volume: Argi berdea.
• Too Loud (Clipping): Argi gorria.

Adjust the gain so that the light remains green during normal operation, occasionally peaking into red for loud sounds without staying red consistently.

6.2 Instrument Mode (INST Button)

Figure 6: Instrument Mode for Guitar/Vocal

When connecting an instrument like a guitar, press the INST button corresponding to the input channel. This optimizes the gain and input impedance for instrument-level signals, ensuring a clear and accurate sound.

6.3 Irteerako bolumenaren kontrola

The large OUTPUT knob controls the master volume for the LINE OUTPUTS (to your studio monitors). Adjust this to a comfortable listening level.

6.4 Headphone Volume Control

The HEADPHONE Volume knob controls the volume specifically for the connected headphones. This allows you to adjust your monitoring level independently of the main output.

6.5 Loop Back Function

Figure 7: Loop Back and Mono/Stereo Controls

Press the LOOP BACK button to enable real-time mixing of computer audio (e.g., background music, accompaniment tracks) into your ongoing recording. This is useful for live streaming or recording vocals over a backing track.

6.6 Mono/Stereo Switch (MONO Button)

The MONO button allows you to easily switch between mono and stereo output with a single click. When the button is pressed and illuminated, the output is typically in stereo. When it is not pressed, the output is mono. This can be useful for checking phase issues or ensuring compatibility with mono playback systems.

6.7 Zuzeneko Jarraipena

Figure 8: Zero-Latency Monitoring

Press the DIRECT MONITOR button to enable zero-latency monitoring. This allows you to hear your input signal directly through your headphones or monitors without any delay caused by computer processing, which is crucial for recording performances.

6.8 RGB argiztapena

The TX510 features vibrant 7-color breathing light effects surrounding the control area, adding a visual element to your setup. The light ring around the gain knobs also indicates sound intensity.

7. Mantentzea

• Garbiketa: Erabili zapi leun eta lehor bat gailuaren kanpoaldea garbitzeko. Ez erabili garbitzaile likidorik edo material urratzailerik.
• Biltegiratzea: Denbora luzez erabiltzen ez baduzu, gorde gailua leku fresko eta lehor batean, eguzki-argitik eta hautsetik babestuta.
• Kableen zainketa: Handle cables carefully. Avoid sharp bends or excessive pulling that could damage connectors or wires.

8. Arazoak

9. Zehaztapenak

10. Bermea eta Laguntza

TONOR products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official TONOR webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzura zuzenean. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

TONOR Customer Service: Please visit the official TONOR webgunea kontaktu-informazio eta laguntza-baliabide eguneratuenak lortzeko.