1. Segurtasun informazioa
Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Mantendu haurren eskura.
- Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
- Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
- Ez utzi puzgailua zaindu gabe funtzionatzen ari den bitartean.
- Avoid exposing the inflator to rain or moisture.
- Do not attempt to disassemble or modify the device. Contact customer support for assistance.
- Erabili emandako kargatzeko kablea eta osagarriak soilik.
- Gorde puzgailua leku fresko eta lehor batean erabiltzen ez duzunean.
2. Paketearen edukia
Egiaztatu elementu guztiak zure paketean daudela:
- 1x SYNCWIRE SW2002 Portable Tire Inflator
- 1x Air Hose
- 1x USB-C kargatzeko kablea
- 1x Biltegiratze Poltsa
- 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
- 4x Car Tire Valve Caps
- 1x Erabiltzailearen eskuliburua (Dokumentu hau)
- 1x Warranty Policy
Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.
3. Produktua amaitu daview
3.1 Ezaugarri nagusiak
- High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
- Pantaila LCD handia: Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
- Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
- Itzalketa automatikoa: Aurrez ezarritako presioa lortzen denean, automatikoki gelditzen du inflazioa.
- Inflazio Modu Anitzak: 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
- Unitate polifazetikoak: Supports PSI, KPA, BAR, and KG/CM².
- LED linterna integratua: Argiztapen egokia ematen du argi gutxiko baldintzetan erabiltzeko.
- Larrialdietako Energia Bankua: USB output port allows charging of mobile devices.
- Trinkoa eta eramangarria: Biltegiratze eta garraio errazerako diseinatua.
3.2 Gailuaren diseinua
Irudia: Aurrealdea view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.
- LCD pantaila: Shows current and target pressure, battery level, and selected mode.
- Modu botoia: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
- Pizteko botoia: Gailua piztu/itzali eta puztea abiarazten/gelditzen du.
- +/- Botoiak: Adjusts preset pressure values.
- Unitatearen botoia: Changes pressure units (PSI, KPA, BAR, KG/CM²).
- LED argiaren botoia: Barneko linterna aktibatzen/desaktibatzen du.
- Aire-mangeraren ataka: Connects the air hose to the inflator.
- USB-C sarrera: For charging the inflator.
- USB-A irteera: Puzgailua power bank gisa erabiltzeko.
4. Konfigurazioa
4.1 Charging the Inflator
- Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
- Konektatu kablearen beste muturra USB elikatze-egokitzaile bateragarri batera (ez dago barne) edo USB ataka batera.
- The battery indicator on the LCD display will flash during charging and become solid when fully charged.
- A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.
4.2 Aire-hodia eta tobera lotzea
- Screw the air hose securely into the air hose port on the top of the inflator.
- Select the appropriate nozzle adapter for the item you wish to inflate.
- Screw the chosen nozzle adapter onto the free end of the air hose.
5. Funtzionamendu-argibideak
5.1 Piztu/Itzaltzea
- Eduki sakatuta Pizteko botoia for 3 seconds to turn the inflator on.
- The LCD display will light up, showing the current battery level and default mode.
- Itzaltzeko, sakatu eta eutsi botoiari Pizteko botoia for 3 seconds again, or the device will automatically shut off after a period of inactivity.
5.2 Inflazio modua eta unitatea hautatzea
Image: The inflator's LCD screen displaying various preset inflation modes.
- Piztu ondoren, sakatu botoia Modu botoia to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
- Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
- Sakatu Unitatearen botoia to switch between pressure units: PSI, KPA, BAR, KG/CM².
5.3 Nahi den presioa ezartzea
- Once a mode is selected, the preset pressure value will flash on the LCD.
- Erabili + eta - buttons to adjust the desired target pressure.
- Refer to your vehicle's or item's manufacturer recommendations for correct pressure values.
5.4 Inflazioa abiaraztea eta gelditzea
Image: The inflator actively inflating a car tire, demonstrating its speed.
- Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
- Sakatu Pizteko botoia to start inflation. The real-time pressure will be displayed.
- Aurrez ezarritako presioa lortzen denean, puzgailua automatikoki geldituko da.
- To manually stop inflation, press the Pizteko botoia berriz.
- Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.
5.5 LED linterna erabiltzea
- Sakatu LED argiaren botoia linterna pizteko.
- Press again to cycle through different light modes (e.g., steady, SOS, flashing).
- Press a third time to turn off the flashlight.
5.6 Energia Bankuaren Funtzioa
Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.
- Connect your device's charging cable to the USB-A output port on the inflator.
- The inflator will begin charging your device. This function is useful for emergencies.
6. Mantentzea
6.1 Garbiketa
- Ensure the inflator is turned off and disconnected from any power source before cleaning.
- Garbitu kanpoaldea leun batekin, damp oihal. Ez erabili produktu kimiko gogorrak edo garbitzaile urratzaileak.
- Keep the air intake and exhaust vents clear of dust and debris.
6.2 Biltegiratzea
- Store the inflator and its accessories in the provided storage bag.
- Gorde gailua leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik urrun.
- For prolonged storage, charge the inflator every 3-6 months to maintain battery health.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Puzgailua ez da pizten. | Bateria baxua. | Kargatu puzgailua guztiz. |
| Puzgailua goiztiarra gelditu da. | Preset pressure reached. | This is normal operation. Check the pressure reading. |
| Gehiegi berotzea. | Allow the device to cool down for 10 minutes before resuming use. | |
| Puzte motela edo aire irteerarik ez. | Air hose or nozzle not securely connected. | Ziurtatu konexio guztiak estuak direla. |
| Incorrect nozzle adapter used. | Select the correct adapter for the item. | |
| Presio-irakurketa zehaztugabeak. | Presio-unitate okerra hautatu da. | Press the Unit Button to select the desired unit (PSI, KPA, BAR, KG/CM²). |
| Sentsoreen oztopoa. | Ensure the air hose and valve are clear of debris. |
8. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Ereduaren izena | SW2002 |
| Marka | SYNCWIRE |
| Presio maximoa | 150 PSI |
| Aire Fluxuaren Ahalmena | 18 litro minutuko |
| Energia iturria | Bateriaren bidez |
| Eragiketa modua | Automatikoa |
| Hodiaren luzera | 9.05 hazbete |
| Elementuaren pisua | 1.05 kilo |
| Produktuaren neurriak (LxWxH) | 5.29" x 2.93" x 1.85" |
| Materiala | Durable, Reliable |
| Kolorea | Beltza |
9. Bermea eta Laguntza
SYNCWIRE-k eskaintzen du 36 hilabeteko bermea for the SW2002 Portable Tire Inflator.
For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.
Please refer to the included Warranty Policy document for detailed terms and conditions.