1. Sarrera
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Jectse MT24 25 100P 24V Water Booster Pump. Please read these instructions carefully before use and retain them for future reference. This pump is designed to increase water pressure in various domestic and agricultural applications.
2. Segurtasun informazioa
- Ziurtatu elikatze-iturria ponparen bolumenarekin bat datorrelatage eskakizunak (24V).
- Ez erabili ponpa kable edo entxufe hondatuta daudenean.
- Avoid immersing the pump in water. The pump has an IP56 rating, indicating protection against dust and strong jets of water, but it is not submersible.
- Ensure proper ventilation around the pump during operation.
- Ez erabili ponpa likido sukoi edo korrosiboetarako.
- Mantendu haurrak eta baimenik gabeko langileak martxan dagoen ponparen ondotik urrun.
- Disconnect power before performing any maintenance or installation.
- Operating temperature for the pump is 0-40℃, medium temperature 4-80℃, and liquid temperature 0-65℃. Do not exceed these limits.
3. Produktuaren ezaugarriak
- Martxa lehorreko babesa: The pump automatically stops when water supply is low to prevent damage.
- Hasiera/Geldi automatikoa: In automatic mode, the pump starts and stops based on faucet opening and closing.
- Low Pressure Start: The pump can switch to low pressure mode if the water flow is insufficient to trigger automatic start.
- Ikaskuntza adimenduna: The water booster pump intelligently learns and selects an efficient boosting solution based on varying water flow and pressure conditions.
- Energia aurreztea eta funtzionamendu isila: Equipped with a brushless motor and centrifugal impeller, the pump operates quietly and efficiently.
4. Paketearen edukia
Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:
- 1 x Water Booster Pump (Model: MT24 25 100P)
- 1 x Power Adapter (EU Plug, 100-240V input)
- 1 x Threaded Tube
- 1 x Argibide eskuliburua
- 2 x Torlojuak
- 1 x Strong Adhesive Sticker
5. Zehaztapenak
| Zehaztapena | Balioa |
|---|---|
| Eredua | MT24 25 100P |
| Bolumen eragileatage | 24 V |
| Oraingoa | 4.2 A |
| Plug Voltage | 100-240 V |
| Isolamendu-maila | H klasea |
| Babes-balorazioa | IP56 |
| Boost Effect | 100 Pa |
| Motor Potentzia | 100 W |
| Zarata Maila | Zarata txikia |
| Funtzionamendu modua | Manual and Automatic Dual Control |
| Emaria | 25 litro minutuko |
| Igogailua | 25 m |
| Pipe Inner Diameter | Gutxi gorabehera. 15 mm / 0.6 hazbete |
| Giro-tenperatura | 0-40 ℃ |
| Tenperatura ertaina | 4-80 ℃ |
| Likidoaren Tenperatura | 0-65 ℃ |
| Irteera-presioa | 2 bar |
| Presio maximoa | 1 MPa |
| Konexio-metodoa | Harikatua |
| Materiala | ABS, Copper |
| Kolorea | Urdina |
6. Konfigurazioa eta instalazioa
The Jectse MT24 25 100P water booster pump is designed for straightforward installation. It can be integrated into various water systems to enhance pressure.
Instalaziorako jarraibide orokorrak:
- Identify the cold and hot water inlet pipes.
- Install the booster pump at the designated location in the water line.
- Ziurtatu konexio guztiak ondo itxita eta iragazgaitzak direla ihesak saihesteko.
- Use a wrench to connect the pump to the pipeline for easy and secure installation.
Installation Diagrams for Various Applications:
7. Funtzionamendu-argibideak
The pump features both manual and automatic control modes. For most applications, the automatic mode is recommended.
Modu automatikoa:
- Once installed and powered, the pump will automatically detect water flow.
- When a faucet or water outlet is opened, the pump will start to boost pressure.
- When the faucet or water outlet is closed, the pump will automatically stop.
- The intelligent learning function allows the pump to adapt to different water flow and pressure situations for optimal performance.
Low Pressure Start:
- If the initial water flow is too low to trigger the automatic start, the pump can engage a low-pressure start mode to initiate boosting.
Eskuzko modua:
- Refer to the control panel on the pump for manual operation options.
8. Mantentzea
Regular maintenance ensures the longevity and optimal performance of your water booster pump.
- Garbiketa: Aldian-aldian garbitu ponparen kanpoaldea iragarkiekinamp oihal. Ez erabili produktu kimiko gogorrak edo garbitzaile urratzaileak.
- Ikuskapena: Regularly check for any signs of leaks around connections. Ensure the power cable is not damaged.
- Neguan egitea: If the pump is installed in an area subject to freezing temperatures, ensure it is drained or protected from frost to prevent damage.
- Iragazkiaren egiaztapena: If your system includes an inline filter, check and clean it as per its manufacturer's instructions to prevent debris from entering the pump.
9. Arazoak
Ponparekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ponpa ez da martxan jartzen | Ez dago elikadura hornidurarik Insufficient water flow (dry run protection activated) Blocked inlet/outlet | Egiaztatu korronte konexioa eta entxufea Ur hornidura egokia bermatzea Check pipes for blockages |
| Low boost effect | Partial blockage in pipes Airea sisteman Instalazio okerra | Inspect pipes for debris Jarri airea sistematik Review instalazio-diagramak |
| Ponpak etengabe funtzionatzen du | Ihesa sisteman Sentsorearen matxura | Egiaztatu konexio guztiak ihesak daudenik Jarri harremanetan bezeroarentzako arreta-zerbitzuarekin arazoa jarraitzen badu |
| Ezohiko zarata | Airea ponpan Hondakinak bultzadorean Muntaketa soltea | Bleed air Disconnect power and inspect impeller (if accessible) Ensure pump is securely mounted |
Konponbide hauek saiatu ondoren arazoa konpontzen ez bada, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
10. Bermea eta Laguntza
This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, spare parts, or warranty claims, please contact the retailer or manufacturer directly.