CONTEC TP500 (LED) Kontakturik gabeko Infragorri Termometroaren Erabiltzaile Eskuliburua

1. Sarrera

This manual provides essential instructions for the safe and effective operation of the CONTEC TP500(LED) Non-Contact Infrared Thermometer. This device is designed for accurate and rapid temperature measurement without physical contact, suitable for infants, children, and adults. Please read this manual thoroughly before use and retain it for future reference.

Figure 1: CONTEC TP500(LED) Non-Contact Infrared Thermometer.

2. Segurtasun informazioa

• Ez sartu termometroa uretan edo beste likido batzuetan.
• Mantendu gailua eguzki-argitik, tenperatura altuetatik eta hezetasun handitik urrun.
• Saihestu gailua erortzea edo kolpe gogorrak jasan.
• Ez saiatu gailua zeuk desmuntatzen edo konpontzen. Jarri harremanetan bezeroarentzako arreta-zerbitzuarekin zerbitzua behar izanez gero.
• Mantendu bateriak haurren eskura ez dauden lekuetan. Bota erabilitako bateriak tokiko araudien arabera.
• This device is intended for household use. Consult a medical professional for any health concerns or persistent fever.
• Ensure the measurement probe is clean before each use to maintain accuracy and hygiene.

3. Produktuaren ezaugarriak

• Kontaktu gabeko neurketa: Measures temperature without physical contact, reducing discomfort and potential cross-contamination.
• Precise Infrared Probe: Utilizes an advanced infrared sensor for accurate and rapid temperature readings within 1 second.
• LED pantaila handia: Clear and easy-to-read LED display, visible even in low light conditions or at night.
• Memoria Funtzioa: Stores up to 30 groups of measurement values, allowing for easy tracking of temperature trends.
• Fever Warning: Intelligent sound and light prompts indicate different temperature levels (normal, low fever, high fever) for quick assessment.
• Itzaltze automatikoa: Device automatically turns off after 5 seconds of inactivity to conserve battery life.
• Unitate-bihurketa: Easily switch between Celsius (°C) and Fahrenheit (°F) as preferred.
• Bateria baxuaren adierazlea: Alerts the user when batteries need replacement.

Figure 2: Understanding the display indicators.

4. Konfigurazioa

4.1 Bateriaren instalazioa

1. Aurkitu bateriaren konpartimentuaren estalkia termometroaren heldulekuan.
2. Slide or open the cover according to the indicator marks.
3. Insert two "AAA" batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Itxi bateriaren konpartimentuaren estalkia ondo itxi arte klik egin arte.

Note: The package does not contain batteries. Please use two new "AAA" batteries for optimal performance.

5. Funtzionamendu-argibideak

5.1 Neurketa bat egitea

1. Ziurtatu termometroa garbi eta lehor dagoela.
2. Press the power button to turn on the device. The LED display will light up.
3. Position the thermometer 1-3 cm (approximately 0.4-1.2 inches) from the center of the forehead. Ensure there is no hair, sweat, or cosmetics obstructing the measurement area.
4. Press the measurement button (trigger) once. The temperature reading will appear on the LED display within 1 second.
5. The device will provide sound and light prompts based on the measured temperature.
6. The measurement will be automatically saved to the device's memory.

Figure 3: Proper measurement distance and placement on the forehead.

5.2 Switching Between Celsius (°C) and Fahrenheit (°F)

1. Piztu termometroa.
2. Long press the "M" (Memory) button to enter the memory interface.
3. While in the memory interface, long press and hold the "M" button again to enter the setting mode.
4. Press the "M" button briefly to toggle between Celsius (°C) and Fahrenheit (°F).
5. Once your desired unit is displayed, release the button. The setting will be saved automatically.

Figure 4: Celsius and Fahrenheit unit conversion.

5.3 Memoriaren funtzioa

The CONTEC TP500(LED) thermometer automatically stores the last 30 temperature readings. To view iraganeko neurketak:

1. Piztu termometroa.
2. Briefly press the "M" (Memory) button to cycle through the stored readings. Each press will display the next stored value.

Figure 5: Memory function displaying temperature trends.

6. Mantentzea

6.1 Garbiketa

• Wipe the thermometer body with a soft, slightly damp oihal.
• For the infrared probe, gently clean with a cotton swab lightly moistened with 70% isopropyl alcohol. Allow it to dry completely before use.
• Ez erabili garbitzaile urratzailerik edo disolbatzailerik, eta ez murgildu gailua uretan.

6.2 Biltegiratzea

• Store the thermometer in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
• If the device will not be used for an extended period (e.g., more than one month), remove the batteries to prevent leakage and potential damage.

7. Arazoak

8. Zehaztapenak

• Eredua: TP500
• Neurketa metodoa: Non-contact Infrared
• Neurketa distantzia: 1-3 cm
• Pantaila: LED
• Memoria biltegiratzea: 30 talde
• Itzaltze automatikoa: 5 segundo
• Energia iturria: 2 x AAA bateria (ez daude barne)
• Bateriaren iraupena: 600 neurketa inguru
• Ezaugarri bereziak: Low Battery Indicator, Fever Warning
• Materiala: Plastikoa
• Kolorea: Zuria
• Neurriak: Approximately 162mm (Height) x 113mm (Length) x 51mm (Width)

6. irudia: Produktuaren neurriak.

9. Bermea eta Laguntza

The CONTEC TP500(LED) Non-Contact Infrared Thermometer comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims, technical support, or any questions regarding the product, please contact CONTEC customer service. You can typically find contact information on the product packaging or through the official CONTEC webgunea.

For purchases made on Amazon, you may also contact the seller, CONTEC, directly through your Amazon order history for assistance.