MOKA SFX Professional 3D Kinetic Light LED Lifting Ball System User Manual

1. Sarrera

This manual provides essential information for the safe and effective operation of your MOKA SFX Professional 3D Kinetic Light LED Lifting Ball System. Please read this manual thoroughly before installation and use, and retain it for future reference. This system is designed to create dynamic visual effects for professional stage, nightclub, bar, and theater environments.

2. Segurtasun informazioa

OHARRA: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.

• Konektatu beti unitatea lurrera konektatutako entxufe batera.
• Ziurtatu elikadura hornidura boltage matches the unit's requirements (AC90-240V, 50-60Hz).
• Ez jarri unitatea euri edo hezetasunera.
• Deskonektatu korrontetik garbitu edo mantendu aurretik.
• Installation must be performed by qualified personnel and adhere to local electrical codes.
• Ensure secure mounting to truss, grid, or ceiling points using appropriate safety cables.
• Mantendu segurtasun-distantzia bat mugitzen diren piezetatik funtzionamenduan zehar.
• Ez erabili kable elektrikoa hondatuta badago.
• Saihestu begiak LED argi-iturriarekiko zuzenean esposizioan jartzea.

3. Paketearen edukia

Egiaztatu elementu guztiak bertan daudela eta egoera onean daudela paketea hustu ondoren:

• 1 x 3D LED Light Lifting System (Kinetic Light)
• 1 x kablea
• Accessories (including safety-rated suspension rope)
• 1 x Erabiltzailearen eskuliburua

Image: Contents of the MOKA SFX Kinetic Light System package, including the main unit, power cord, accessories, and user manual.

4. Produktuaren ezaugarriak

• Dynamic Vertical Motion: 20cm luminous sphere with 0-3 meter vertical range for mesmerizing visual effects.
• Funtzionamendu isila: Engineered for smooth vertical motion with minimal operational noise, suitable for live performances.
• DMX512 kontrola: 6 independent DMX channels for precise control over RGB intensity, master dimming, strobe speed, and exact lift height.
• Integraziorik gabekoa: Easily daisy-chain with other DMX devices via standard 3-pin DMX.
• Eraikuntza iraunkorra: Features a durable heat-resistant housing and includes a safety-rated suspension rope.
• Kalitate handiko LED aleak: Equipped with 42PCS 0.5W RGB 3in1 LED beads for long lifespan and low power consumption.
• Kontrol modu anitz: Supports DMX512, Sound-Activated, and Auto modes.

Image: Diagram illustrating the 20cm ball diameter and 0-3 meter lifting height capability of the kinetic light system.

Irudia: Gertuko planoa view highlighting the high-quality LED beads (42PCS 0.5W RGB 3in1) and their estimated 50,000-hour lifespan.

5. Zehaztapenak

Image: Visual representation of key product parameters and specifications.

6. Konfiguratzeko argibideak

6.1 Muntaketa

1. Identify a suitable mounting location (truss, grid, or ceiling) that can safely support the weight of the unit and withstand dynamic motion.
2. Securely attach the main lifting mechanism to the chosen mounting point using appropriate clamps or hardware (not included, unless specified in accessories).
3. Attach the safety-rated suspension rope from the unit to a separate, independent support structure as a backup.
4. Connect the 20cm RGB sphere to the lifting cable mechanism. Ensure it is securely fastened.

6.2 Konexio elektrikoa

1. Ensure the power switch on the unit is in the "OFF" position.
2. Connect the provided power cord to the unit's power input.
3. Plug the power cord into a grounded AC90-240V, 50-60Hz power outlet.

6.3 DMX konexioa (aukerakoa)

1. For DMX control, connect a standard 3-pin DMX cable from your DMX controller's output to the DMX IN port on the kinetic light unit.
2. To daisy-chain multiple units, connect a DMX cable from the DMX OUT port of the first unit to the DMX IN port of the next unit, and so on.
3. Ensure the last unit in the DMX chain has a DMX terminator connected to its DMX OUT port (if available and recommended by your DMX controller).

7. Funtzionamendu-argibideak

7.1 Piztu/Itzali

Flip the main power switch to the "ON" position to power on the unit. Flip to "OFF" to power down.

7.2 Kontrol moduak

The unit supports three primary control modes:

• Modu automatikoa: The unit will cycle through pre-programmed patterns and colors automatically.
• Soinua kontrolatzeko modua: The unit will react to ambient sound, changing patterns and motion based on audio input.
• DMX Console Mode: Provides full control over all parameters via an external DMX512 controller.

Select the desired mode using the control panel on the unit or via DMX if applicable.

Image: Illustration of the available control modes: Auto, Sound Control, and DMX Console, with a DMX controller shown.

7.3 DMX Control (6 Channels)

When in DMX mode, the unit responds to 6 DMX channels:

1. Channel 1: Red Intensity (0-255 for 0-100% Red)
2. Channel 2: Green Intensity (0-255 for 0-100% Green)
3. Channel 3: Blue Intensity (0-255 for 0-100% Blue)
4. Channel 4: Master Dimming & Strobe Speed (Controls overall brightness and strobe effects from subtle pulse to rapid flash)
5. Channel 5: Lift Height Control (0-255 for 0-3 meter vertical position)
6. Channel 6: Special Effects/Macros (Triggers pre-programmed patterns or movements)

Refer to your DMX controller's manual for detailed programming instructions. Experiment with channel values to achieve desired lighting and motion effects.

8. Mantentzea

Regular maintenance ensures optimal performance and extends the lifespan of your kinetic light system.

• Garbiketa: Periodically clean the exterior of the unit and the LED sphere with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and unplugged before cleaning.
• Ikuskapena: Regularly inspect all cables (power, DMX, lifting cable) for any signs of wear, damage, or fraying. Check mounting hardware for tightness and security.
• Aireztapena: Ensure that the ventilation openings on the main unit are clear and not obstructed to prevent overheating.
• Biltegiratzea: If storing the unit for an extended period, ensure it is clean, dry, and protected from extreme temperatures and humidity.

9. Arazoak

10. Bermea eta Laguntza

MOKA SFX products are manufactured to high quality standards. For warranty information, please refer to the warranty card included with your product or visit the official MOKA SFX webgunea.

For technical support, service, or replacement parts, please contact MOKA SFX customer service directly. Provide your product model number (MK-LB01) and purchase date when contacting support.

MOKA SFX Store: Visit MOKA SFX Store on Amazon