Aigo Q2507 Mini-Tower PC Case Instruction Manual

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Aigo Q2507 Mini-Tower PC Case. Please read this manual thoroughly before beginning any installation to ensure proper assembly and safe usage. This PC case is designed to house standard desktop components, supporting M-ATX and ITX motherboards.

Segurtasun Informazioa

• Always disconnect the power supply from the wall outlet before installing or removing any components to prevent electric shock.
• Erabili eskumuturreko uhal antiestatiko bat deskarga elektrostatikoek (ESD) eragindako kalteak saihesteko osagai sentikorrei.
• Osagaiak kontu handiz maneiatu. Saihestu pinak edo zirkuitu-plakak zuzenean ukitzea.
• Ensure all cables are routed properly and do not obstruct airflow or moving parts.
• Mantendu zorroa bero-iturrietatik, eguzki-argitik eta hezetasunetik urrun.
• Ez saiatu kaxaren egitura aldatzen, horrek bermea baliogabetu eta segurtasun arriskuak sor ditzakeelako.

Paketearen edukia

Mesedez, egiaztatu elementu guztiak zure paketean daudela:

• Aigo Q2507 Mini-Tower PC Case
• Osagarrien kita (torlojuak, euskarriak, kable-bridak)
• Erabiltzailearen eskuliburua (dokumentu hau)

Konfigurazioa

1. Kasua prestatzea

Before installation, remove both side panels of the case. Typically, these are secured with thumbscrews at the rear of the case.

Irudia: Angelua view of the Aigo Q2507 Mini-Tower PC Case, showing the front panel and the side panel removed, revealing the internal structure.

2. Plaka amaren instalazioa

1. Install the necessary motherboard standoffs onto the motherboard tray. The Q2507 supports M-ATX and ITX motherboards.
2. Kontu handiz jarri plaka basea euskarrien gainean, torloju-zuloak lerrokatuz.
3. Lotu plaka nagusia emandako torlojuekin. Ez estutu gehiegi.

Irudia: Barnekoa view of the Aigo Q2507 PC Case, highlighting the motherboard tray area with pre-drilled holes for standoffs.

3. Biltegiratze unitatearen instalazioa

The case supports 1 x SSD and 1 x HDD.

1. Locate the drive bays. SSDs typically mount on the motherboard tray or dedicated brackets, while HDDs use a cage.
2. Secure your SSD(s) and HDD(s) using the appropriate screws from the accessory kit.

Irudia: Barnekoa view of the Aigo Q2507 PC Case, showing the designated areas for installing storage drives (SSD and HDD).

4. Expansion Card Installation (VGA)

The case features 4 expansion slots.

1. Remove the necessary slot covers from the rear of the case.
2. Insert your graphics card (VGA) or other expansion cards into the corresponding PCIe slots on your motherboard.
3. Secure the card(s) with screws. The maximum VGA length supported is 250 mm.

Image: Rear internal view of the Aigo Q2507 PC Case, showing the four expansion slots and the rear fan mount.

5. Cooling Fan Installation

The case supports one 120 mm fan on the side and one 80 mm fan on the rear.

1. Mount the fans to their designated positions using fan screws.
2. Connect the fan power cables to your motherboard or power supply.

Image: Angled front-side view of the Aigo Q2507 PC Case, with an internal fan visible through the side panel vent.

6. Aurreko panelaren konexioak

Connect the front panel cables (USB 2.0, Audio, Microphone, Power button, Reset button, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.

Irudia: Aurrealdea gertutik view of the Aigo Q2507 PC Case, showing the front I/O panel with USB 2.0 ports, audio jacks, and power/reset buttons.

7. Kableen kudeaketa

Route all cables neatly behind the motherboard tray or through designated cutouts to improve airflow and aesthetics. Use cable ties if necessary.

8. Kasuaren itxiera

Once all components are installed and cables are managed, reattach the side panels and secure them with the thumbscrews.

Funtzionamendua

After completing the setup, connect your monitor, keyboard, mouse, and power cable to your assembled PC. Press the power button on the front panel to start your system. Ensure all peripherals are functioning correctly.

Mantentzea

• Garbiketa: Regularly clean dust from the case interior and fan filters using compressed air or a soft brush. Dust buildup can impede airflow and lead to overheating.
• Aire-fluxua: Ensure the case has adequate ventilation. Do not block the air intake or exhaust vents.
• Kableen kudeaketa: Periodically check cable routing to ensure no cables are interfering with fans or obstructing airflow.

Arazoak konpontzea

• Sistemak ez du pizten: Check all power connections, including the power supply to the wall, motherboard 24-pin, and CPU 8-pin connectors. Ensure front panel power switch cable is correctly connected to the motherboard.
• Gehiegizko berotzea: Verify that all fans are spinning correctly and are not obstructed. Clean any dust buildup. Ensure proper thermal paste application on the CPU cooler.
• Ez dago pantailarik: Confirm that your graphics card is properly seated in its PCIe slot and that the monitor cable is securely connected to the graphics card.
• USB ports not working: Check the front panel USB cable connection to the motherboard header.

Zehaztapenak

Image: Diagram illustrating the dimensions of the Aigo Q2507 Mini-Tower PC Case: 26.5 cm (depth) x 16.5 cm (width) x 34 cm (height).

Bermea

This Aigo Q2507 Mini-Tower PC Case comes with a 12 hilabeteko bermea from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation. Please retain your proof of purchase for warranty claims.

Laguntza

For technical assistance, warranty claims, or further inquiries, please contact your retailer or visit the official Aigo website for support resources. When contacting support, please have your product model (Q2507) and proof of purchase readily available.

Sareko baliabideak: www.aigo.com (Adibampesteka, egiaztatu ofiziala mesedez webgunea)