PULITUO 20V Cordless Drill/Driver Instruction Manual

1. Segurtasun informazioa

Irakurri tresna elektriko honekin emandako segurtasun-abisu, argibide, ilustrazio eta zehaztapen guztiak. Behean zerrendatzen diren argibide guztiak ez betetzeak deskarga elektrikoa, sutea edo/edo lesio larriak eragin ditzake.

Erremintaren segurtasun-abisu orokorrak:

• Lan eremuko segurtasuna: Mantendu lan-eremua garbi eta ondo argiztatuta. Eremu nahasiak edo ilunek istripuak gonbidatzen dituzte.
• Segurtasun elektrikoa: Erreminten entxufeak entxufearekin bat etorri behar dira. Inoiz ez aldatu entxufea inola ere.
• Segurtasun pertsonala: Egon adi, ikusi zer egiten ari zaren eta erabili zentzua erreminta elektrikoa ustiatzean.
• Tresnaren erabilera eta zaintza: Ez behartu tresna elektrikoa. Erabili tresna elektriko egokia zure aplikaziorako.
• Bateria tresnaren erabilera eta zaintza: Kargatu fabrikatzaileak zehaztutako kargagailuarekin soilik.

2. Paketearen edukia

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer service.

• 1 x PULITUO 20V Cordless Drill/Driver (Model: DC7720S)
• 2 x 1.5 Ah Lithium-Ion Batteries
• 1 x Bateria kargagailua
• 4 x Wood Drill Bits (4mm, 5mm, 6mm, 8mm)
• 4 x Twist Drill Bits (4mm, 5mm, 6mm, 8mm)
• 1 x Luzapen-barra
• 1 x Ardatz malgua
• 10 x Short Screwdriver Bits
• 10 x Bihurkin luzeko puntak
• 1 x Screw Anchor Set

Image: Contents of the PULITUO 20V Cordless Drill/Driver kit, including the drill, two batteries, charger, and various bits and accessories.

3. Konfigurazioa

3.1 Bateria kargatzea

1. Ensure the battery is securely inserted into the charger.
2. Entxufatu kargagailua entxufe elektriko estandar batera.
3. The indicator light on the charger will show the charging status. Charge until fully indicated.
4. Disconnect the charger from the outlet and remove the battery once charging is complete.

Image: A 20V Lithium-Ion battery for the PULITUO drill, showing its design and connection points.

3.2 Installing/Removing Battery

1. To install: Align the battery with the base of the drill and slide it in until it clicks into place.
2. To remove: Press the release button on the battery and slide it out from the drill.

3.3 Zulagailu-puntak jartzea/kentzea

1. Biratu mandrila erlojuaren orratzen kontrako noranzkoan masailezurrak irekitzeko.
2. Sartu nahi duzun zulagailu-punta edo bihurkin-punta mandrilan.
3. Biratu mandrila erlojuaren orratzen noranzkoan masailezurrak brokaren inguruan ondo estutzeko.
4. To remove: Rotate the chuck counter-clockwise to loosen and pull out the bit.

Image: Close-up of the PULITUO 20V Cordless Drill/Driver, highlighting the 3/8" keyless chuck and other features.

4. Funtzionamendu-argibideak

4.1 Piztea/Itzaltzea eta Abiadura Aldakorra

• To turn on, press the variable speed switch. The speed increases with more pressure.
• To turn off, release the variable speed switch.
• The integrated LED light illuminates the work area when the trigger is pressed.

4.2 Aurrera/Atzera etengailua

• Sakatu etengailua ezkerrera aurrera biratzeko (torlojuak zulatu/sartzeko).
• Alderantzizko biraketa egiteko (torlojuak kentzeko) etengailua eskuinera bultzatu.
• Ensure the switch is in the center position to lock the trigger and prevent accidental startup.

4.3 Speed Settings (0-400 RPM / 0-1500 RPM)

The drill features two-speed settings for different applications:

• Abiadura Baxua (0-400 RPM): Ideal for driving screws and working with softer materials where more torque and less speed are required.
• Abiadura Handia (0-1500 RPM): Suitable for drilling into harder materials like wood or metal, requiring higher rotational speed.

Image: Diagram illustrating the two-speed settings of the PULITUO 20V Cordless Drill/Driver, recommending low speed for screwdriving and high speed for drilling.

4.4 Torque Adjustment (21+1 Settings)

The torque collar allows you to adjust the amount of rotational force applied by the drill. This prevents over-tightening screws and damaging materials.

1. Rotate the torque collar to select the desired setting from 1 to 21. Lower numbers are for smaller screws and softer materials, higher numbers for larger screws and harder materials.
2. The drill icon setting is for drilling applications, providing maximum torque without clutch engagement.

Image: Visual representation of the 21+1 torque adjustment settings on the PULITUO 20V Cordless Drill/Driver, showing different applications like screw driving, drilling wood, and drilling metal.

4.5 Aplikazioak

This drill is suitable for various tasks including:

• Drilling into wood, metal, and plastic.
• Torlojuak sartu eta kentzea.
• Altzariak muntatzea.
• General home repairs and DIY projects.

Irudia: Adibamples of various applications for the PULITUO 20V Cordless Drill/Driver, including drilling wood, screw driving, drilling metal, and drilling in corners.

5. Mantentzea

5.1 Garbiketa

• Keep the ventilation slots of the power tool clean to prevent overheating.
• Erabili biguna, damp oihal bat tresnaren kanpoaldea garbitzeko. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
• Regularly clean the chuck jaws to ensure proper grip on bits.

5.2 Biltegiratzea

• Store the drill and accessories in a dry, secure place, away from direct sunlight and extreme temperatures.
• Ensure batteries are fully charged before long-term storage and recharge them periodically (every 3-6 months) to maintain battery health.

6. Arazoak

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official PULITUO webgunea. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.