Behringer RS-9 Rhythm Sequencer Eurorack Module

1. Sarrera

The Behringer RS-9 is a 52HP Eurorack rhythm sequencer module designed to provide comprehensive control over drum machines and other rhythmic elements in your modular setup. It features 10 drum channels, 10 trigger/accent outputs, 1 CV output, and supports up to 64 steps per sequence with pattern and song modes. This manual provides detailed instructions for setup, operation, and maintenance of your RS-9 module.

2. Segurtasun-argibideak

• Elikatze-iturria: Ensure the module is connected to a compatible Eurorack power supply that meets the required voltage and current specifications. Incorrect power can damage the module.
• Ingurumena: Operate the module in a dry environment, away from moisture, extreme temperatures, and direct sunlight.
• Manipulazioa: Handle the module with care. Avoid dropping or subjecting it to strong impacts.
• Zerbitzua: Do not attempt to service the module yourself. Refer all servicing to qualified personnel.

3. Konfigurazioa

3.1 Eurorack Mounting

The RS-9 is a 52HP Eurorack module. To install, align the module with an available 52HP space in your Eurorack case. Connect the ribbon cable from your Eurorack power supply to the module's power connector, ensuring the red stripe on the ribbon cable aligns with the -12V pin on both the power supply and the module. Secure the module with the provided screws.

3.2 Hasierako konexioak

After mounting, connect your drum modules or other sound sources to the RS-9's trigger and accent outputs. Use standard 3.5mm Eurorack patch cables. For MIDI synchronization, connect a MIDI cable to the MIDI IN port. For USB MIDI, connect a USB cable to your computer or host device.

4. Kontrolak eta konexioak

Figure 1: Behringer RS-9 Rhythm Sequencer Eurorack Module Front Panel Overview

4.1 Irteerako Atala

• TRIG 1-10: These are the 10 individual trigger outputs for each drum channel. Connect these to the trigger inputs of your drum modules.
• ACC 1-10: These are the 10 individual accent outputs, providing a higher voltage trigger for accented steps. Connect these to accent inputs on your drum modules if available.
• CV OUT: A single Control Voltage output that can be assigned to various parameters.

4.2 Kontrol nagusiak

• VEL (Velocity) Knob: Adjusts the velocity or intensity of the triggers.
• ACCENT Button: Toggles accent mode for step programming.
• TAP botoia: Used for tap tempo input or other timing functions.
• Pantaila: Shows tempo, step number, and other parameter values.
• Erreproduzitu/Pausatu botoia: Starts and stops sequence playback.
• Gelditzeko botoia: Stops sequence playback and resets to the beginning.

4.3 Sequence Navigation & Modes

• LENGTH (16, 32, 48, 64): Buttons to set the sequence length in steps.
• AUTOSCROLL: Enables or disables automatic scrolling through steps during playback.
• SONG Button: Enters Song mode for chaining patterns.
• PATTERN Button: Enters Pattern mode for selecting and editing individual patterns.
• STEP Button: Enters Step mode for programming individual steps.

4.4 Editing & Utility Functions

• EDITATU botoia: Activates edit functions for various parameters.
• GORDE botoia: Saves current patterns or songs.
• COPY Button: Copies patterns or steps.
• ERASE Button: Erases patterns, steps, or other data.
• DUMP Button: Used for data transfer or backup.
• MODE botoia: Cycles through different operational modes.
• SYNC Section (TEMPO, SWING, PROB, FLAM, TRIG, INT, MIDI, USB): Controls for synchronization settings, including internal tempo, swing, probability, flam, and selecting sync sources (Internal, MIDI, USB, Trigger).
• TRIGGER Section (STEP RPT, NOTE RPT): Controls for step repeat and note repeat functions.
• MUTE botoia: Mutes selected drum channels.
• TRACK botoia: Selects tracks for editing.
• SOLO Button: Solos selected drum channels.
• AUTOFILL: Automatically fills steps based on a pattern.
• EZARPENAK: Accesses global settings and configurations.

4.5 Step Buttons (1-16)

The 16 large buttons are used for step programming. Each button corresponds to a step in the sequence. They also have secondary functions indicated by text below them, such as MIDI, VCD, CLOCK, MAD, DDEES, CV, DOLV, DAND, PRAR, FLAM, PPT, 1/8, 1/8T, 1/16, 1/16T, 1/32. These secondary functions are typically accessed by holding down a shift or function button (not explicitly labeled in OCR but common for such modules) and pressing the step button.

4.6 Sarrera/Irteera Portuak

• IN / OUT (3.5mm jacks): General purpose input/output jacks for various control signals.
• CV IN: Kontrol boltage input for external modulation.
• RESET IN: Input for an external reset signal to restart the sequence.
• MIDI IN / OUT (DIN connectors): Standard MIDI input and output for synchronization and control with external MIDI devices.

5. Oinarrizko Funtzionamendua

5.1 Piztu/Itzaltzea

Ensure the module is correctly installed in your Eurorack case and the power supply is connected. Power on your Eurorack case. The RS-9 will power on automatically. To power off, simply power down your Eurorack case.

5.2 Setting Tempo

The tempo can be set using the main tempo knob or by pressing the TAP button multiple times. The current tempo will be displayed on the LED screen. You can also select external sync sources (MIDI, USB, TRIG) via the SYNC section.

5.3 Creating a Basic Pattern

1. Sakatu EREDUA button to enter Pattern mode.
2. Select an empty pattern slot (if available) or an existing pattern to edit.
3. Sakatu URRATSA button to enter Step mode.
4. Select a drum channel (e.g., by pressing a corresponding track button if available, or cycling through channels).
5. Sakatu 1-16 step buttons to activate or deactivate triggers for that channel at specific steps.
6. Erabili AZENTUA button to add accents to steps.
7. Sakatu Erreproduzitu/Pausatu button to hear your pattern.
8. Sakatu GORDE to store your pattern.

6. Ezaugarri aurreratuak

6.1 Pattern and Song Modes

The RS-9 allows you to create multiple patterns and chain them together into songs. In EREDUA mode, you can select, edit, copy, and erase individual patterns. In ABESTIA mode, you can arrange patterns in a specific order to create longer sequences or full tracks.

6.2 Synchronization Options

The SINK section provides flexible timing options:

• INT (Internal): The RS-9 uses its own internal clock.
• MIDI: Synchronizes to an external MIDI clock received via the MIDI IN port or USB.
• USBa: Synchronizes to an external clock received via the USB connection.
• TRIG: Synchronizes to an external trigger pulse.

Egokitu Swing to add a rhythmic feel and PROB (Probability) to introduce variations in trigger playback. FLAM adds a quick double-trigger effect.

6.3 Trigger and Accent Outputs

The 10 dedicated trigger and accent outputs allow for precise control over individual drum sounds. The accent outputs provide a higher voltage pulse, which can be used by compatible drum modules to create dynamic variations in sound.

6.4 CV Output

The single CV output can be assigned to control various parameters within the RS-9 or sent to other Eurorack modules for modulation. Consult the settings menu for CV assignment options.

7. Mantentzea

The Behringer RS-9 requires minimal maintenance. Keep the module clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure all connections are secure and free from dust. Periodically check for firmware updates on the Behringer webgunea errendimendu optimoa eta funtzio berrietarako sarbidea bermatzeko.

8. Arazoak

• Potentziarik gabe: Check Eurorack power supply connection and ensure the red stripe on the ribbon cable is correctly aligned. Verify your Eurorack case is powered on.
• No Sound/Triggers: Ensure patch cables are correctly connected from RS-9 outputs to drum module inputs. Verify drum modules are powered and configured correctly. Check that patterns are programmed and the sequencer is playing.
• Incorrect Tempo/Sync Issues: Verify the selected sync source (INT, MIDI, USB, TRIG) matches your setup. If using external sync, ensure the external device is sending a clock signal.
• Botoiak ez dute erantzuten: Try restarting the module by powering off and on your Eurorack case. If issues persist, contact support.

9. Zehaztapenak

10. Bermea eta Laguntza

Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, jo Behringer-en webgune ofizialera. website or contact your authorized Behringer dealer. Keep your proof of purchase for warranty claims.