Sarrera
Thank you for choosing the HENDI CONVECTOMAT 8-Cavity Non-Stick Egg Mold. This professional-grade oven tray is designed for efficient and consistent preparation of perfectly round fried eggs, omelets, and crepes. Crafted from aluminum with a durable Teflon™ non-stick coating, it ensures easy food release and uniform heat distribution. This manual provides essential information for safe operation, maintenance, and optimal performance of your new egg mold.
Segurtasun-argibideak
- Irakurri argibide guztiak lehen erabili aurretik.
- This product is designed for oven use only. Do not use on stovetops or direct flame.
- Always use oven mitts or heat-resistant gloves when handling the hot mold.
- Do not exceed the maximum recommended temperature of 260°C (500°F).
- Avoid using sharp metal utensils on the non-stick surface to prevent scratching. Use silicone, plastic, or wooden utensils.
- Ensure the mold is placed securely on an oven rack or baking sheet to prevent spills.
- Mantendu haurren eskura ez dagoen leku beroan.
Produktua amaituview
The HENDI CONVECTOMAT Egg Mold features eight round cavities, each designed to produce uniform portions. Its robust construction and non-stick coating make it ideal for high-volume professional use.
Irudia: Goian view of the HENDI CONVECTOMAT 8-cavity non-stick egg mold, showing its eight round indentations.
- Neurriak: 530 x 325 x 26 mm (L x W x H), GN1/1 size.
- Barrunbearen neurriak: Ø110 mm (top), Ø80 mm (bottom), 20 mm (depth).
- Materiala: Aluminum with Teflon™ non-stick coating.
- Edukiera: 8 individual portions.
Konfigurazioa
- Despaketatzea: Carefully remove the egg mold from its packaging.
- Hasierako garbiketa: Before first use, wash the mold thoroughly with warm soapy water and a soft sponge. Rinse well and dry completely.
- Ongailuak (aukerakoak baina gomendagarriak): Lightly coat the non-stick surface of each cavity with a small amount of cooking oil or butter. Heat the mold in the oven at a low temperature (e.g., 150°C / 300°F) for 5-10 minutes. Let it cool, then wipe off any excess oil with a paper towel. This helps enhance the non-stick properties.
Funtzionamendu-argibideak
This mold is ideal for preparing perfectly round fried eggs, omelets, and crepes in a professional oven environment.
- Labea berotu: Preheat your oven to the desired temperature for your recipe (e.g., 180-200°C / 350-400°F for eggs).
- Prepare Mold: Lightly grease each cavity with cooking spray, oil, or butter, even with the non-stick coating, for best results and easy release.
- Gehitu osagaiak:
- Izan ere Fried Eggs: Crack one egg into each cavity. Season as desired.
- Izan ere Tortilak: Pour pre-mixed omelet batter into each cavity, filling approximately two-thirds full. Add desired fillings.
- Izan ere Crepes/Pancakes: Pour batter into each cavity.
- Labean: Carefully place the filled mold into the preheated oven. Bake according to your recipe's instructions. Cooking times will vary based on oven temperature and food type.
- Kendu eta zerbitzatu: Once cooked, carefully remove the mold from the oven using oven mitts. Allow to cool slightly. Use a silicone spatula or similar non-scratching utensil to gently lift the cooked items from the cavities.
Image: Cooked fried eggs with green onions in the HENDI CONVECTOMAT 8-cavity non-stick egg mold, ready for serving.
Mantentzea eta Garbiketa
Proper care will extend the life of your HENDI egg mold.
- Hoztu: Always allow the mold to cool completely before cleaning.
- Eskuz garbitu bakarrik: Produktu hau da EZ da ontzi-garbigailuan garbitu daitekeena. Wash by hand with warm soapy water and a soft sponge or cloth.
- Saihestu urratzaileak: Do not use abrasive cleaners, scouring pads, or metal brushes, as these can damage the non-stick coating.
- Hondar egoskorra: For baked-on food, soak the mold in warm soapy water for a period before gently cleaning.
- Lehortzea: Dry thoroughly after washing to prevent water spots and maintain the finish.
- Biltegiratzea: Store in a dry place, ideally with a soft cloth or paper towel between stacked molds to protect the non-stick surface.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Food sticks to cavities. | Gre nahikoa ezasing; damaged non-stick coating; cooking at too high a temperature. | Ensure cavities are lightly greased before each use. Avoid metal utensils. Do not exceed 260°C. |
| Sukaldaritza irregularra. | Oven hot spots; mold not level; incorrect oven temperature. | Rotate the mold halfway through cooking. Ensure oven is preheated and calibrated correctly. Place mold on a flat, stable surface in the oven. |
| Non-stick coating appears worn. | Abrasive cleaning; use of metal utensils; excessive heat. | Always hand wash with soft materials. Use only silicone, plastic, or wooden utensils. Adhere to maximum temperature limits. |
Zehaztapenak
| Modelo zenbakia | 808856 |
| Marka | HENDI |
| Neurriak (L x W x H) | 530 x 325 x 26 mm (20.9 x 12.8 x 1.0 hazbete) |
| Cavity Diameter (Top) | 110 mm (4.3 hazbete) |
| Cavity Diameter (Bottom) | 80 mm (3.1 hazbete) |
| Barrunbearen Sakonera | 20 mm (0.8 hazbete) |
| Barrunbe kopurua | 8 |
| Materiala | Aluminum with Teflon™ non-stick coating |
| Kolorea | Beltza |
| Pisua | 980 gramo (2.16 libera) |
| Tenperatura Erresistentzia | Gehienez 260 °C (500 °F) |
| Ontzi-garbigailuan segurua | No (Hand wash only) |
| Labean seguru | Bai |
| Jatorrizko Herrialdea | Txina |
Bermea eta Laguntza
For warranty information or technical support, please refer to the HENDI official website or contact your local HENDI distributor. Keep your purchase receipt as proof of purchase.
HENDI Official Webgunea: www.hendi.eu