Seesii Cordless Impact Wrench and Electric Car Jack Kit

Sarrera

Thank you for choosing the Seesii Cordless Impact Wrench and Electric Car Jack Kit. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before use and retain it for future reference.

This kit includes a powerful cordless impact wrench (WH760) with 1000N.m (738ft-lbs) max breakaway torque and a 5-ton electric car jack with an integrated tire inflate pump, designed to assist with vehicle maintenance tasks such as tire changes.

Segurtasun informazio garrantzitsua

WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool and car jack. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Beti erabili babes pertsonaleko ekipamendu egokia, segurtasun-betaurrekoak, eskularruak eta entzumen-babesak barne.
• Ziurtatu lan-eremua ondo argiztatuta dagoela eta oztoporik gabe dagoela.
• Mantendu haurrak eta ingurukoak urrun, tresna erabiltzen duzun bitartean.
• Ez erabili tresna elektrikoak atmosfera lehergarrietan, adibidez, likido sukoiak, gasak edo hautsak daudenean.
• Always disconnect the battery pack from the impact wrench before making any adjustments, changing accessories, or storing the tool.
• For the electric car jack, ensure the vehicle is on a firm, level surface. Use wheel chocks to prevent the vehicle from moving.
• Never work under a vehicle supported only by a jack. Always use appropriate jack stands.
• Do not overload the car jack beyond its rated capacity of 5 tons.
• Avoid direct contact with the car jack's lifting mechanism during operation.
• Keep all electrical connections dry and away from water. The car jack and power cord connector are waterproof, but extreme conditions should be avoided.

Paketearen edukia

Verify that all items listed below are present and undamaged upon opening the package. If any items are missing or damaged, please contact Seesii customer support.

• Seesii Cordless Impact Wrench (WH760)
• Electric Car Jack (5 Ton capacity)
• 2 x 4.0Ah litio-ioizko bateria
• Kargatzaile azkarra
• Impact Wrench Sockets (17mm, 19mm, 21mm, 23mm)
• Tire Inflate Pump Nozzles (3 types)
• Power Cable for Car Jack
• Rugged Storage Toolbox
• Erabiltzailearen eskuliburua (dokumentu hau)

Produktua amaituview

Cordless Impact Wrench (WH760)

The WH760 impact wrench features a powerful brushless motor, offering high torque and efficiency for various fastening and loosening tasks. It includes multiple speed settings and a forward/reverse switch for versatile operation.

Irudia: Barnekoa view of the Seesii impact wrench's upgraded brushless motor, highlighting benefits like increased running time, lifetime, power, efficiency, and reduced sparks and noise.

Irudia: Seesii Cordless Impact Wrench demonstrating stepless speed control with three speed modes (0-2500RPM, 0-2900RPM, 0-3300RPM) indicated by LED battery level.

Irudia: Seesii Cordless Impact Wrench showing forward and reverse modes, with directional arrows indicating tightening and loosening actions.

Kotxe elektrikoa Jack

The electric car jack is designed for quick and effortless vehicle lifting, featuring a 5-ton capacity and an integrated tire inflate pump. It is equipped with LED lights for visibility in low-light conditions.

Irudia: Seesii Electric Car Jack lifting a vehicle, illustrating its suitability for sedans, MPVs, vans, and SUVs, with a maximum lift height of 17.7 inches in two minutes.

Irudia: Seesii Electric Car Jack with integrated tire inflate pump, showing a 35L/min inflating speed, tire pressure monitoring gauge, and three inflatable nozzles.

Konfigurazioa

1. Bateria kargatzea

1. Konektatu kargagailu azkarra entxufe estandar batera.
2. Slide the 4.0Ah Lithium-Ion battery into the charger. Ensure it clicks into place.
3. Allow approximately 3 hours for a full charge. The charger indicator light will change to confirm charging status.
4. Kargatu ondoren, kendu bateria kargagailutik.

2. Attaching Sockets to Impact Wrench

1. Ensure the impact wrench is off and the battery is removed.
2. Select the appropriate socket size (17mm, 19mm, 21mm, or 23mm) for your application.
3. Align the square drive of the socket with the anvil of the impact wrench.
4. Push the socket firmly onto the anvil until it locks securely.
5. To remove, pull the socket off the anvil while pressing the release button (if present).

Irudia: Seesii Portable Impact Wrench being used to remove a car tire, with an inset showing the wrench's maximum torque of 420 N.M and included 17/19 mm and 21/23 mm sockets.

Funtzionamendu-argibideak

1. Cordless Impact Wrench Operation

1. Instalatu bateria: Slide a charged battery pack into the base of the impact wrench until it locks.
2. Select Direction (Forward/Reverse): Use the forward/reverse switch located near the trigger to select the desired rotation direction.
   • For tightening (clockwise), push the switch to the 'F' position.
   • For loosening (counter-clockwise), push the switch to the 'R' position.
3. Abiadura doitzea: The impact wrench features stepless speed control. The further you press the trigger, the higher the speed. It also has three-speed modes (Low, Medium, High) for precise control. Select the appropriate mode based on the task.
4. Eragiketa:
   • Place the socket firmly onto the fastener (nut or bolt).
   • Press the trigger to start the tool. Apply steady pressure.
   • For loosening stubborn fasteners, the tool's high breakaway torque (up to 1000N.m) will be effective.
   • For tightening, ensure not to overtighten. Use a torque wrench for final tightening to vehicle manufacturer specifications.
5. Erabili ondoren: Release the trigger, remove the battery, and store the tool safely.

Irudia: Seesii Cordless Impact Wrench in use, demonstrating 900N.m max torque for various applications like tightening screws, shelf installation, tire disassembly, and industrial use.

2. Electric Car Jack Operation

1. Prestaketa:
   • Aparkatu ibilgailua gainazal sendo eta lau batean.
   • Engage the parking brake and place wheel chocks on the wheels that will remain on the ground.
   • Locate the vehicle's designated jacking points (refer to your vehicle's owner's manual).
2. Konektatu energia:
   • Connect the car jack's power cable to your vehicle's 12V power outlet (cigarette lighter socket) or directly to the car battery terminals using the provided adapter. Ensure the car is started for optimal power supply.
3. Jack posizioa:
   • Position the car jack directly under the designated jacking point.
   • Use the integrated LED lights for better visibility in dark conditions.
4. Igogailu ibilgailua:
   • Press the "UP" button on the jack's control panel to raise the vehicle.
   • Monitor the lifting process. The jack can lift up to 5 tons and has a lifting height range of 6.1 to 17.7 inches.
   • Once the desired height is reached, release the button.
   • WARNING: Always place jack stands under the vehicle before performing any work. Never rely solely on the car jack for support.
5. Beheko ibilgailua:
   • After completing work and removing jack stands, press the "DOWN" button on the control panel to slowly lower the vehicle.
   • Ensure no obstructions are under the vehicle as it lowers.
6. Erabili ondoren: Disconnect the power cable and store the jack in its toolbox.

3. Tire Inflate Pump Operation

1. Konektatu energia: Ensure the car jack is connected to the vehicle's 12V power source (car started).
2. Lotu mahuka: Screw the inflate pump hose onto the tire valve stem.
3. Hautatu tobera (aplikagarria bada): For other inflatables (balls, air mattresses), attach the appropriate nozzle from the three provided types to the hose.
4. Ezarri presioa: The integrated gauge displays current tire pressure. Refer to your vehicle's recommended tire pressure.
5. Hasi inflazioa: Turn on the inflate pump switch. The pump will start inflating at a speed of 35L/min.
6. Monitorearen presioa: Continuously monitor the pressure gauge. Stop inflation once the desired pressure is reached.
7. Deskonektatu: Turn off the pump, unscrew the hose from the valve stem, and store the components.

Mantentzea

Zaintza Orokorra

• Keep the tools clean and free from dirt, dust, oil, and grease. Use a soft, damp garbiketarako zapi bat. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
• Regularly inspect all components for signs of wear or damage. Replace worn parts immediately.
• Ziurtatu torloju eta finkagailu guztiak ondo estututa daudela.

Bateria zaintzea

• Gorde bateriak leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturatik urrun.
• Ez gorde bateriak deskargatuta denbora luzez. Kargatu itzazu aldian-aldian erabiltzen ez badituzu.
• Ez jarri bateriak uraren edo hezetasunaren eraginpean.

Biltegiratzea

• Store the impact wrench, car jack, and all accessories in the provided rugged toolbox when not in use.
• Gorde leku lehor eta seguru batean, haurren eskura ez dagoen lekuan.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

Seesii products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Seesii webgunea.

For direct assistance, you may contact Seesii customer service through the contact information provided on their official webgunea edo zure erosketa plataformaren bidez.