SURAIELEC 10-Inch 120V LED Underwater Pool Light

1. Sarrera

This user manual provides detailed instructions for the installation, operation, and maintenance of your SURAIELEC 10-Inch 120V LED Underwater Pool Light. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of the product.

2. Segurtasun informazioa

WARNING: Risk of Electric Shock. Always disconnect power at the circuit breaker before installing or servicing this product.

• Installation must be performed by a qualified electrician and comply with all local and national electrical codes.
• Ziurtatu produktua behar bezala lotuta dagoela.
• Do not operate the light if the cord is damaged or if there are exposed wires. Immediately replace damaged units.
• This light is designed for 120V AC input. Do not connect to a low voltage transformadore.
• Ensure the pool niche is properly sealed and waterproof to prevent water ingress into electrical connections.
• Mantendu haurrak instalazio eremutik urrun.

3. Produktua amaitu daview

3.1 Osagaiak

The SURAIELEC 10-Inch 120V LED Underwater Pool Light package includes:

• 10-Inch LED Pool Light Fixture (Model: UPLAH35B)
• Integrated 100FT Power Cord
• Erabiltzailearen eskuliburua (dokumentu hau)

Figure 3.1: SURAIELEC 10-Inch 120V LED Underwater Pool Light with 100FT cord.

3.2 Ezaugarri nagusiak

• Standard Niche Compatibility: Designed to fit 10-inch standard pool light niches, including those from Pentair, Hayward, and Jandy.
• Eraikuntza iraunkorra: Crafted with 316L stainless steel and an upgraded rubber ring for enhanced rust-proof and waterproof performance (IP68 rated).
• Energia-eraginkortasuna: 35W LED light provides brightness equivalent to a 300W incandescent bulb, offering over 80% energy savings.
• Argiztapen distiratsua: Delivers 4000 lumens of 6000K cool white light for clear and inviting pool ambiance.
• Direct 120V AC Input: No external transformer, housing, rings, or gaskets are required for installation into existing 10-inch niches.

Figure 3.2: The light features 316L stainless steel, a silicone sealing gasket, and IP68 waterproof rating for reliability.

Figure 3.3: Energy efficiency comparison showing 90% savings over traditional incandescent bulbs.

3.3 Zehaztapenak

3.4 irudia: Produktuaren neurrien eta zehaztapen nagusien irudikapen bisuala.

4. Konfigurazioa eta instalazioa

This pool light is designed for direct installation into existing 10-inch wet niches without the need for a separate transformer, housing, rings, or gaskets. Ensure your pool has an embedded niche before proceeding.

4.1 Niche Compatibility

The SURAIELEC pool light is compatible with most standard 10-inch large wet niches from major brands:

Figure 4.1: Compatibility with various 10-inch wet niches.

4.2 Kableatzeko jarraibideak

The SURAIELEC pool light operates on 120V AC and does not require a transformer. Connect the light's power cord directly to your pool's 120V AC junction box. Ensure all connections are waterproof and comply with electrical codes.

• Hari marroia: Konektatu Lerroa (beroa) wire from your power source (typically Black in North American wiring).
• Hari urdina: Konektatu Neutroa wire from your power source (typically White in North American wiring).
• Kable horia/berdea: Konektatu Lurra wire from your power source (typically Green or bare copper in North American wiring).

Note: The product's internal wiring colors (Brown, Blue, Yellow/Green) follow international standards. Refer to the mapping above for North American electrical systems.

Figure 4.2: Wiring diagram for 120V AC connection. Ensure proper conduit and junction box usage.

4.3 Instalazio-urratsak

1. Deskonektatu energia: Turn off power to the pool lighting circuit at the main breaker. Verify power is off using a voltage probatzailea.
2. Prepare Niche: Ensure the 10-inch wet niche in your pool wall is clean and free of debris.
3. Kablearen ibilbidea: Feed the light's 100FT power cord through the conduit to the junction box. Leave sufficient slack (approximately 48 inches) at the light fixture end to allow for servicing.
4. Egin konexio elektrikoak: At the junction box, connect the light's wires to the corresponding pool electrical system wires as described in Section 4.2. Use appropriate waterproof connectors.
5. Secure Light in Niche: Carefully place the light fixture into the niche. Ensure the pilot screw (typically at 12 o'clock position) aligns with the niche's corresponding hole. Secure the light using the niche's retaining mechanism.
6. Proba funtzionamendua: Once installation is complete and all connections are secure and waterproof, restore power at the circuit breaker and test the light's operation.

5. Funtzionamendu-argibideak

The SURAIELEC 10-Inch 120V LED Underwater Pool Light operates as a standard pool light. To turn the light on or off, use the existing pool light switch connected to its circuit.

• Piztu: Flip the designated pool light switch to the "ON" position. The light will illuminate with a crisp 6000K cool white glow.
• Itzali: Flip the designated pool light switch to the "OFF" position.

Figure 5.1: The SURAIELEC pool light providing clear, cool white illumination.

6. Mantentzea

The SURAIELEC pool light is designed for durability and minimal maintenance. Regular inspection and cleaning will help ensure its longevity and optimal performance.

• Ohiko ikuskapena: Periodically inspect the light fixture and its cord for any signs of damage, wear, or exposed wires. If any damage is observed, disconnect power immediately and contact a qualified professional for inspection or replacement.
• Garbiketa: Gently clean the lens of the light fixture as needed to remove algae, mineral deposits, or debris that may obstruct light output. Use a soft brush or cloth and mild pool-safe cleaning solutions. Do not use abrasive cleaners.
• Saltwater Pool Compatibility: The 316L stainless steel housing provides superior corrosion resistance, making it suitable for saltwater pools and coastal environments. Regular rinsing with fresh water after exposure to saltwater can further extend its lifespan.

Figure 6.1: 316L Stainless Steel offers robust protection, especially in saltwater and coastal environments.

7. Arazoak

If you encounter issues with your SURAIELEC pool light, refer to the following common problems and solutions:

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact SURAIELEC customer support or a qualified electrician.

8. Bermea eta Laguntza

SURAIELEC is committed to providing high-quality products. For warranty information, technical support, or customer service inquiries, please visit the official SURAIELEC webgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzuarekin.

SURAIELEC Official Store: Visit SURAIELEC Store on Amazon