VEVOR Gas Pressure Washer 170D User Manual

1. Sarrera

Thank you for choosing the VEVOR Gas Pressure Washer Model 170D. This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your pressure washer. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

This gas-powered pressure washer is designed for various cleaning tasks, offering a maximum pressure of 3400 PSI (239.04 kgf/cm²) and a flow rate of 10 L/min. It is suitable for cleaning vehicles, fences, patios, driveways, and other outdoor surfaces.

Figure 1.1: VEVOR Gas Pressure Washer 170D in use, demonstrating its powerful water spray for effective cleaning.

2. Segurtasun informazioa

Always observe basic safety precautions when using this product to reduce the risk of injury or damage. Failure to follow these instructions may result in serious injury or property damage.

2.1 Segurtasun-abisu orokorrak

• Irakurri eskuliburu osoa: Erabili aurretik, ulertu funtzionamendu-argibide eta abisu guztiak.
• Segurtasun-ekipo egokia erabili: Always wear eye protection (safety glasses or goggles), hearing protection, and protective clothing.
• Mantendu haurrak eta maskotak urrun: Do not allow children or untrained individuals to operate the pressure washer.
• Operate in a well-ventilated area: The engine produces carbon monoxide, which is a colorless, odorless, and poisonous gas.
• Erregaiaren manipulazioa: Handle gasoline with extreme care. Store fuel in approved containers and never refuel a hot or running engine.
• High-pressure spray: Never direct the spray at people, animals, electrical devices, or the unit itself. The high pressure can cause severe injury.
• Azalera egonkorra: Erabili presio-garbigailua gainazal egonkor eta lau batean, iraultzea saihesteko.
• Egiaztatu kalterik dagoen: Before each use, inspect the unit, hoses, and nozzles for any damage. Do not operate if damaged.

3. Paketearen edukia

Verify that all items listed below are included in your package. If any parts are missing or damaged, contact VEVOR customer service.

• Gas Pressure Washer Unit (main body with engine and pump)
• Presio handiko mahuka (26 oin / 8 m)
• Spray Pistola
• Makila
• Quick-Connect Nozzles (5 types: 0°, 15°, 25°, 40°, Soap Nozzle)
• Gurpilak (2)
• Kirten muntaia
• 8-10 Wrench (1)
• Phillips bihurkin (1)
• Spark Plug Socket and Socket Bar (1)

3.1 Irudia: Gainetikview of the VEVOR Gas Pressure Washer 170D and its included accessories.

4. Konfigurazioa eta Muntaketa

Jarraitu urrats hauek presio-garbigailua muntatu eta lehen erabilerarako prestatzeko.

4.1 Muntaketa

1. Gurpilak lotu: Securely attach the two wheels to the main frame using the provided hardware.
2. Instalatu heldulekua: Slide the handle assembly into the designated slots on the main unit and secure it with the locking pins or bolts.
3. Konektatu presio handiko mahuka: Connect one end of the high-pressure hose to the pump outlet on the pressure washer and the other end to the spray gun. Ensure connections are tight.
4. Lotu makila: Konektatu ihinztagailu-haga ihinztagailu-pistolara.

4.2 Erregaia eta olioa

The engine is shipped without oil or fuel. You must add both before starting the unit.

• Gehitu motorraren olioa: Remove the oil fill cap/dipstick. Add the recommended engine oil (refer to engine manual for type and capacity) until it reaches the full mark on the dipstick. Do not overfill.
• Gehitu gasolina: Bete erregai-depositua gasolina fresko eta berunik gabekoarekin (gutxienez 87 oktano). Ez bete gehiegi. Utzi tartea erregaiaren hedapenerako.

4.3 Ur-konexioa

• Connect a garden hose (minimum 5/8 inch diameter) to the water inlet on the pressure washer.
• Ensure the garden hose is free of kinks and has a steady water supply.
• Ireki uraren hornidura erabat.
• Squeeze the trigger on the spray gun to purge air from the pump and hose until a steady stream of water emerges. This prevents damage to the pump.

4.1. irudia: Xehetasuna view of the 210cc 4-stroke engine and axial cam pump, highlighting key components for setup.

5. Funtzionamendu-argibideak

Jarraitu urrats hauek zure presio-garbigailua modu seguru eta eraginkorrean erabiltzeko.

5.1 Motorra martxan jartzea

1. Ensure the water supply is fully on and all air is purged from the system.
2. Jarri motorraren etengailua "ON" posiziora.
3. Mugitu txingola-palanka "TXINGILATU" posiziora (motor hotzarekin).
4. Move the fuel valve to the "ON" position.
5. Tira indarrez atzerakada-abiarazlearen heldulekua motorra martxan jarri arte.
6. Motorra martxan jartzen denean, pixkanaka mugitu txoke-palanka "RUN" posiziora.

5.2 Toberak erabiltzea

The pressure washer comes with 5 quick-connect nozzles for various applications.

• 0°-ko tobera gorria: Concentrated, high-impact jet for tough stains and hard-to-reach areas. Use with extreme caution.
• 15°-ko tobera horia: Narrow spray for intensive cleaning of small areas.
• 25°-ko tobera berdea: Ihinztadura ertaina gainazal gehienak garbitzeko.
• 40°-ko pita zuria: Wide spray for gentle cleaning of delicate surfaces.
• Black Soap Nozzle: Presio baxuko ihinztagailua detergenteak aplikatzeko.

To change nozzles, pull back the collar on the quick-connect fitting at the end of the wand, insert the desired nozzle, and release the collar. Ensure the nozzle is securely seated before operating.

Figure 5.1: The five quick-connect nozzles and their corresponding spray angles and applications.

5.3 Detergent Application

• Fill the detergent tank with pressure washer safe detergent.
• Lotu xaboi beltzaren tobera ihinztagailu-hagatxoari.
• Start the engine and squeeze the trigger. The detergent will be drawn from the tank and mixed with the water at low pressure.
• Detergentea aplikatu ondoren, presio handiko tobera batera aldatu (adibidez, 25° edo 15°) gainazala ondo garbitzeko.

5.4 Itzali

1. Itzali motorraren etengailua.
2. Itzali erregai-balbula.
3. Itzali ur-hornidura.
4. Sakatu ihinztagailuaren gatilua sisteman geratzen den presioa askatzeko.
5. Deskonektatu lorategiko mahuka eta presio handiko mahuka.

Figure 5.2: The extended reach provided by the 26 ft (8 m) high-pressure hose, allowing for versatile cleaning applications.

6. Mantentzea

Regular maintenance ensures optimal performance and extends the life of your pressure washer. Always disconnect the spark plug wire before performing any maintenance.

6.1 Motorraren mantentze-lanak

• Motorraren olioa egiaztatu: Erabili aurretik, egiaztatu olio maila. Aldatu olioa lehenengo 5 orduko funtzionamenduaren ondoren, eta gero 50 orduro edo urtero.
• Garbitu aire-iragazkia: Inspect the air filter every 25 hours or more often in dusty conditions. Clean or replace as needed.
• Bujia egiaztatu: Inspect the spark plug annually or every 100 hours. Clean or replace if necessary.

6.2 Ponpen mantentzea

• Ur garbiaren sarrerako iragazkia: Regularly check and clean the screen filter on the water inlet to prevent debris from entering the pump.
• Neguan egitea: If storing the pressure washer in freezing temperatures, use a pump protector or RV antifreeze to prevent damage to the pump.

6.3 Hose and Nozzle Maintenance

• Mahukak ikuskatu: Regularly check the high-pressure hose and garden hose for cuts, leaks, or damage. Replace if necessary.
• Toberak garbiak: If a nozzle becomes clogged, use the included nozzle cleaning tool to clear any obstructions.

7. Arazoak

Atal honek aurki ditzakezun arazo ohikoenei irtenbideak eskaintzen ditu.

8. Zehaztapenak

Technical specifications for the VEVOR Gas Pressure Washer Model 170D.

• Marka: ZABALTZA
• Eredua: 170D
• Energia iturria: Gasolinaz
• Motorra: 210cc 4-stroke, 7 HP
• Presio maximoa: 3400 PSI (239.04 kgf/cm²)
• Gehienezko emaria: 10 L/min
• Presio handiko mahukaren luzera: 26 oin (8 m)
• Toberak: 5 Quick-Connect (0°, 15°, 25°, 40°, Soap Nozzle)
• Produktuaren neurriak (L x W x H): 52.5 x 72 x 87 cm (20.67 x 28.35 x 34.25 hazbete)
• Elementuaren pisua: 58.03 lb (26.32 kg)
• UPC: 197988808220

Figure 8.1: Dimensional drawing and key specifications of the VEVOR Gas Pressure Washer 170D.

9. Bermea eta Laguntza

For warranty information, technical support, or to order replacement parts, please contact VEVOR customer service. Keep your purchase receipt and product model number handy for faster service.

Normalean laguntza-harremanetarako informazioa VEVORren webgune ofizialean aurki dezakezu. webgunea edo zure dendariaren bidez.