KUNPHY Ultrasonic Jewelry Cleaner BCM-187

1. Sarrera

This manual provides essential information for the safe and effective use of your KUNPHY Ultrasonic Jewelry Cleaner, model BCM-187. This device utilizes ultrasonic waves to clean various items such as jewelry, eyeglasses, and small accessories, offering a thorough cleaning process.

2. Segurtasun informazioa

Please read all safety instructions before operating the device to prevent injury or damage.

• Ez sartu unitate nagusia uretan edo beste likido batzuetan.
• Ziurtatu kablea ez dagoela kaltetuta eta behar bezala konektatuta dagoela entxufe egoki batera.
• Mantendu gailua haurren eskura.
• Do not operate the cleaner without water in the tank.
• Avoid cleaning items that are sensitive to ultrasonic vibrations, such as certain types of pearls, emeralds, or glued items. Consult a jeweler if unsure.
• Deskonektatu gailua erabiltzen ez duzunean eta garbitu aurretik.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• KUNPHY Ultrasonic Jewelry Cleaner (BCM-187)

4. Produktua amaitu daview

The KUNPHY Ultrasonic Jewelry Cleaner features a compact design with a stainless steel cleaning tank and a simple one-touch operation button. It is equipped with a transparent lid to observe the cleaning process.

5. Konfigurazioa eta funtzionamendua

Follow these steps for initial setup and to operate your ultrasonic cleaner:

1. Depositua bete: Open the lid and pour tap water into the stainless steel tank. Do not exceed the maximum water level indicator.
2. Jarri elementuak: Carefully place the items you wish to clean into the water. Ensure items are fully submerged but not overcrowded.
3. Add Cleaning Solution (Optional): For enhanced cleaning results, add a few drops of liquid dish soap or a specialized KUNPHY cleaning solution to the water.
4. Hasi garbitzen: Close the lid and press the one-touch ON/OFF button. The indicator light will illuminate, and the cleaning cycle will begin. The device operates with a 3-minute cleaning cycle.
5. Amaitutako garbiketa: Once the cycle is complete, the device will automatically stop. Open the lid, carefully remove your items, and rinse them under clean water. Dry with a soft cloth.

Items Suitable for Cleaning:

• Jewelry (rings, necklaces, earrings, bracelets)
• Betaurrekoak eta eguzkitako betaurrekoak
• Watch coins (waterproof watches only)
• Dentures and retainers
• Small metal items

Garbiketa errendimendua:

The cleaner operates at 46KHz, providing 360-degree deep cleaning. The process is designed to be gentle yet effective, removing dirt and grime from hard-to-reach areas without causing damage.

6. Mantentzea

Mantentze egokiak zure garbigailuaren iraupena eta errendimendu optimoa bermatzen ditu.

• Erabilera bakoitzaren ondoren: Unplug the device. Empty the water from the tank and wipe the interior with a soft, dry cloth.
• Kanpoko garbiketa: Garbitu unitatearen kanpoaldea leun batekin, damp oihalik. Ez erabili garbitzaile urratzailerik eta ez murgildu unitatea uretan.
• Biltegiratzea: Gorde garbigailua leku fresko eta lehor batean erabiltzen ez duzunean.

7. Arazoak

If you encounter issues with your KUNPHY Ultrasonic Jewelry Cleaner, refer to the following common problems and solutions:

8. Zehaztapenak

• Eredua: BCM-187
• Deposituaren edukiera: 12 oz (350 ml)
• Ultrasoinu maiztasuna: 46KHz
• Garbiketa Zikloa: 3 minutes (one-touch operation)
• Produktuaren neurriak: 7 x 3 x 3 hazbete
• Pisua: 1.1 kilo
• Deposituaren materiala: SUS 304 altzairu herdoilgaitza
• Zarata maila: Less than 45dB (low-noise design)

9. Bermea eta Laguntza

KUNPHY provides a 12 hilabeteko bermea for this product. For any questions or support needs, please contact KUNPHY customer service.

To contact support, navigate to your Amazon account:

1. Joan zaitez Kontua.
2. Hautatu Aginduak.
3. Find your order for the KUNPHY Ultrasonic Jewelry Cleaner and click on Eskaeraren xehetasuna.
4. Locate the 'Sold by: KUNPHY' section and click Galdera bat egin.