1. Sarrera
Thank you for choosing the VOLT Stemless Directional Brass Path Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new low voltage landscape lighting fixture. This path light is designed for outdoor use, providing widespread illumination for pathways, walkways, gardens, driveways, and patios.
Image: The VOLT Stemless Directional Brass Path Light installed along a pathway, providing warm illumination.
2. Segurtasun informazioa
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- This product is intended for use with a 12V low voltage landscape lighting system. A low voltage transformer (not included) is required for operation.
- Do not connect directly to 120V household current.
- Ensure power is disconnected at the transformer before installing or servicing the fixture.
- All electrical connections must comply with local codes and ordinances. If you are unsure about installation, consult a qualified electrician.
- Do not operate the fixture with a damaged cord or if the lens is cracked.
- Mantendu haurrak eta maskotak instalazio-eremutik urrun.
- This fixture is designed for outdoor use and is water-resistant. However, avoid submerging the fixture in water.
3. Zer dago kutxan
Paketeak osagai hauek ditu:
- VOLT Stemless Directional Brass Path Light
- 9-inch Ground Stake
- Mounting Hardware (for surface mounting)
Oharra: A G4 LED bi-pin bulb and a low voltage transformer are sold separately and are required for full functionality.
4. Ezaugarriak
- Pro baxuafile Diseinua: Standing 1.96 inches tall with a 2.71-inch diameter, this light minimizes obstruction and risk of damage.
- Professional Grade Construction: Made from solid cast brass with a bronze finish and a heavy frosted acrylic lens for durability.
- Lamp Prest: Designed for use with a G4 LED bi-pin bulb (not included) rated up to 20W, providing 140 degrees of light output.
- Muntaketa polifazetikoa: Includes a 9-inch ground stake for landscape installation and hardware for surface mounting.
- Korrosioarekiko Erresistentzia: Features a beryllium copper socket for enhanced corrosion resistance.
- Moisture-Tightness: Machine-threaded body screws onto an O-ring for a secure, moisture-tight seal.
- UL/cUL zerrendatua: Segurtasun-arauak betetzen direla bermatzen du.
5. Zehaztapenak
| Atributua | Xehetasuna |
|---|---|
| Marka | VOLT |
| Ereduaren izena | VOLT Stemless Directional Brass Path Light |
| Modelo zenbakia | BDL-VPL-1053-4-BBZ-ZON |
| Kolorea | Brontzea |
| Materiala | Letoia, Metala |
| Produktuaren neurriak | 2.71"L x 2.71"Z x 1.96"A |
| Argi-tresnaren forma | Bidea |
| Energia iturria | Corded Electric (Low Voltage) |
| liburukiatage | 12 voltio (AC) |
| Argi iturri mota | LED (G4 Bi-pin bulb, not included) |
| Bonbilla Oinarria | G4 |
| Max Wattage | 20W (for G4 LED bi-pin bulb) |
| Instalazio mota | Surface Mount, Ground Stake |
| Barruko/Kanpoko erabilera | Kanpoan |
| Uraren Erresistentzia Maila | Urarekiko erresistentea |
| Ziurtagiriak | UL/cUL zerrendatua |
6. Instalazioa
Before beginning installation, ensure the power to your low voltage transformer is turned OFF.
6.1. Bonbilla instalazioa
- Carefully remove the top cap of the path light by unscrewing it.
- Insert a G4 LED bi-pin bulb (sold separately) into the beryllium copper socket. Ensure the pins are fully seated.
- Replace the top cap, screwing it firmly to ensure a moisture-tight seal.
Irudia: Gertutik view of the VOLT Stemless Directional Brass Path Light, showing its compact design.
6.2. Muntatzeko aukerak
The VOLT Stemless Directional Brass Path Light offers two primary mounting methods:
6.2.1. Ground Stake Installation
- Thread the path light onto the included 9-inch PVC ground stake.
- Select a desired location in your landscape. Ensure the location allows for proper drainage and is clear of underground utilities.
- Push the ground stake firmly into the soil until the path light is at the desired height and stable. For hard soil, pre-dig a small pilot hole.
- Ibilbide txikiko boltage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.
6.2.2. Gainazaleko muntaketa
- Identify the desired surface for mounting (e.g., deck, patio edge).
- Use the provided mounting hardware to secure the base of the path light to the surface. Pre-drill pilot holes if necessary.
- Ensure the fixture is securely fastened and stable.
- Ibilbide txikiko boltage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.
6.3. Wiring to Transformer
- Konektatu bolumen baxuatage wire from the path light to the common and 12V terminals on your low voltage transformadore.
- Ziurtatu konexio guztiak estu eta seguru daudela.
- Once all fixtures are installed and wired, turn on the power at the transformer.
Bideoa: Bideo honek ikuspegi orokorra eskaintzen duview of the VOLT Stemless Brass Bronze Directional Path Light, highlighting its features and demonstrating mounting options. It shows how to attach the light to a ground stake and how to prepare it for surface mounting.
7. Funtzionamendu-argibideak
The VOLT Stemless Directional Brass Path Light operates as part of a low voltage landscape lighting system controlled by a transformer. There are no direct controls on the fixture itself.
- Once properly installed and connected to a low voltage transformer, the light will turn on and off according to the transformer's settings (e.g., timer, photocell).
- Ensure the transformer is set to the desired operating schedule.
8. Mantentzea
Regular maintenance will help ensure the longevity and optimal performance of your path light.
- Garbiketa: Periodically clean the fixture and lens with a soft, damp cloth to remove dirt, debris, and mineral deposits. Do not use abrasive cleaners.
- Bonbillaren ordezkoa: If the bulb burns out, ensure the power to the transformer is off before replacing the G4 LED bi-pin bulb. Follow the bulb installation steps in Section 6.1.
- Kableatuen ikuskapena: Annually inspect wiring for any signs of damage, fraying, or loose connections. Repair or replace as needed.
- Egonkortasuna: Check that the fixture remains securely mounted, whether on a ground stake or surface. Re-secure if loose.
9. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da pizten | Transformadoreari ez zaio korronterik ematen Kableatu konexio soltea Bonbilla akastuna Transformer timer/photocell setting | Check power supply to transformer Inspect and tighten all wire connections Ordeztu bonbilla Adjust transformer settings |
| Argi distira | Bonbilla soltea Kableatu konexio soltea Bonbilla bateraezina | Ensure bulb is fully seated Inspect and tighten all wire connections Ensure G4 LED bi-pin bulb is compatible with 12V AC systems |
| Argia iluna da | Bolumen baxuatage transformadoretik Lente zikina Bonbilla wattage baxuegia | Check transformer output voltage Garbitu lentea Ordeztu wat handiagoarekintage G4 LED bi-pin bulb (up to 20W) |
10. Bermea eta laguntza
The VOLT Stemless Directional Brass Path Light is backed by a Bizi osorako bermea. Berme honek ohiko erabileran materialen eta eskulanen akatsak estaltzen ditu.
For warranty claims, technical assistance, or any questions regarding your product, please contact VOLT Lighting customer support. Refer to the official VOLT Lighting webgunea edo zure erosketa-dokumentazioa uneko harremanetarako informazioa lortzeko.
Fabrikatzailea: VOLT Argiztapena
UPC: 842032134007
