ULANZI SL02 Mini Flash Speedlite and Video Light Instruction Manual

1. Sarrera

The ULANZI SL02 Mini Flash Speedlite and Video Light is a compact and lightweight external lighting solution designed for various cameras equipped with a single-contact hot shoe. It offers both flash and continuous video light modes, providing adjustable brightness levels to enhance photographic and videographic results in diverse shooting conditions.

Figure 1: ULANZI SL02 Mini Flash Speedlite and Video Light.

2. Paketearen edukia

• ULANZI SL02 Mini Flash Speedlite and Video Light × 1
• Erabiltzailearen eskuliburua × 1

Note: Charger and charging cable are not included in the package.

3. Bateragarritasuna

The ULANZI SL02 is designed for cameras featuring a single-contact hot shoe. Please verify your camera's hot shoe type before use.

3.1 Compatible Cameras

• SONY: A7III, A7IV, A7R5, A7RIII, A7RIV, A9, A7RII/V4.0, A7R, A6400, RX10, ZV-1, ZV-E10
• CANON: 5DIII, 5DIV, 70D, 80D, 1DX, 850D, 760D, 5DII, 7DII, 6DII, 6D, 800D, 90D, 600D, 7D, M6, M5, M3, EOS RP, EOS R, R5, 60D
• NIKON: D800, D780, D5, D4, D500, D610, D750, D700, D300S, D3300, D3100, D5300, D5200, D5000, 27II, 26, Z8, ZFC, D200, D60, D5100, D7500, D7100
• FUJI: X-Pro2, X-T20, X-T2, X-T1, GFX50s, GFX50R, X-T30, X-T4, X-T3, X-Pro1, X-T10, X-E1, X-T5, X-M5
• PANASONIC: GH4, LX100, GF1, G85, GX85, FZ2500GX, S1R, GH5, G7
• LEICA: SL1, M10, Q2, TYP601, CL, SL2
• PENTAX: K-3I1, 645Z, KP, K-70, K-S2, K-1, K50
• OLYMPUS: E-M1, PRN-F, E-M10II, E-M10III, E-PL8, E-P5, E-M5I

3.2 Incompatible Cameras

• SONY: ZV-1F, ZV1-F, A9III, A99, A77, A350, Zv1 Mark 2
• CANON: 3000D, 1500D, 200DII, R50
• FUJI: X-A3, X100F, X100T

Cameras that do not feature a single-contact hot shoe are not compatible.

Figure 2: Illustration of compatible (with electrical contacts) and incompatible (without electrical contacts) hot shoe types.

4. Konfigurazioa

4.1 Gailua kargatzea

The SL02 features a built-in 250mAh 3.7V polymer battery. Use a Type-C 5V 1A charger (not included) to charge the device. A full charge takes approximately 1 hour. The device can be used while charging.

• Kargatzeko adierazlea: A red light indicates charging, and a green light indicates a full charge.
• Bateriaren iraupena: Provides up to 500 full-power flashes or 1 hour and 25 minutes of continuous use in video light mode.

Figure 3: Charging the ULANZI SL02 via Type-C port. Red light indicates charging, green light indicates fully charged.

4.2 Kamerari eranstea

Slide the SL02's hot shoe mount into your camera's hot shoe slot until it clicks securely into place. Ensure a firm connection for proper functionality.

5. Funtzionamendu-argibideak

5.1 Piztu/Itzali

Eduki sakatuta ON/OFF botoia gailua pizteko edo itzaltzeko.

5.2 Switching Between Flash and Video Light Modes

Luze sakatu MODUA button to switch between Flash Mode and Video Light Mode.

5.3 Adjusting Brightness/Power Levels

In either Flash Mode or Video Light Mode, short-press the MODUA button to cycle through the four available brightness/power levels: 1/1 (full power), 1/2, 1/4, and 1/8.

Figure 4: Long-press MODE to switch modes, short-press MODE to adjust brightness levels. Recycling times for flash mode are also shown.

5.4 Flash Mode Operation

• Gida zenbakia (GN): GN8 at ISO100.
• Kolore Tenperatura: 6500±300K.
• Koloreen errendatze indizea (CRI): 97.
• Obturatzeko abiadura: For optimal results, ensure the camera's shutter speed does not exceed 1/250s.

Figure 5: Visual representation of flash output at 1/1, 1/2, 1/4, and 1/8 power levels.

5.5 Bideo-argiaren moduaren funtzionamendua

• Continuous Color Temperature: 5600K.
• Koloreen errendatze indizea (CRI): 95.
• Illuminance Levels: 200 lux at 0.3m, 81.4 lux at 0.5m, and 21.9 lux at 1m.
• Potentzia irteera: 1W.

Figure 6: The ULANZI SL02 providing continuous illumination in video light mode.

5.6 Specific Instructions for FUJI Cameras

To use the SL02 external flash with FUJI cameras, follow these steps:

1. Access the camera's flash settings. Set the flash sync setting to "M" (Manual mode). The flash will then fire in manual mode.
2. If the flash still does not fire, it may be due to the shutter type. Change the shutter type from electronic to mechanical. Then, adjust the flash settings and change the flash setting from OFF to M. Focus the camera, and then switch the flash back to manual mode.

6. Mantentzea

• Mantendu gailua garbi, zapi leun eta lehor batekin.
• Saihestu gailua uretan edo gehiegizko hezetasunean jartzea.
• Gorde gailua leku fresko eta lehor batean erabiltzen ez duzunean.
• Ez saiatu gailua zuk zeuk desmuntatzen edo konpontzen. Jarri harremanetan bezeroarentzako laguntza eskatzeko.

7. Arazoak

7.1 Flash Not Firing / Video Light Not Illuminating

• Egiaztatu bateragarritasuna: Ensure your camera has a single-contact hot shoe and is listed as compatible.
• Konexio segurua: Verify the SL02 is fully inserted and securely seated in the camera's hot shoe.
• Bateria maila: Check if the device is sufficiently charged. Recharge if the indicator light is off or red.
• Modu aukeraketa: Confirm the correct mode (Flash or Video Light) is selected.
• FUJI Camera Settings: If using a FUJI camera, refer to Section 5.6 for specific flash settings.

7.2 Bateriaren iraupen laburra

• Ensure the device is fully charged before use (approximately 1 hour).
• Bateriaren errendimendua gutxitu egin daiteke denborarekin kargatzeko ziklo errepikatuekin.
• Operating at full power (1/1) in flash mode or continuously in video light mode will consume battery faster.

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information, technical support, or any issues encountered during the use of your ULANZI SL02 Mini Flash Speedlite and Video Light, please contact ULANZI customer service through the retailer where the product was purchased or visit the official ULANZI weblaguntza baliabideen gunea.