Original KH-DX 36V Throttle User Manual

1. Produktua amaitu daview

This manual provides instructions for the Original KH-DX 36V Throttle, designed as a direct replacement and upgrade for compatible electric bikes. It features integrated cruise control and a power indicator display, ensuring seamless integration and enhanced riding experience.

Figure 1.1: The KH-DX 36V Throttle, showing the main grip, control housing, and wiring harness with a 6-pin connector.

2. Ezaugarri nagusiak

• Pantaila: 4 power indicators for battery level monitoring.
• Entxufea: 6 wires, 6 pins connector for secure and reliable connection.
• Ezaugarri gehigarriak: Integrated cruise control button for comfortable long-distance riding.
• Materiala: Constructed from durable rubber for a comfortable and secure grip.
• Kablearen luzera: Approximately 130cm (51 inches) long cable for flexible installation.
• Instalazioa: Plug and play design, eliminating the need to distinguish wire colors or sequences.

Figure 2.1: The accelerator display, illuminated with green lights indicating power status when installed on an ebike handlebar.

3. Bateragarritasuna

This 36V throttle is specifically designed for and compatible with the following electric bike models:

• DYU D3F Ebike
• DYU D2F Ebike
• DYU C3 Ebike
• DYU C4 Ebike
• Jetson Bolt Pro LX10 Electric Bike
• Jetson Atlas Electric Bike
• ANCHEER Electric Bikes (specific models may vary, verify connector type)

This throttle is an updated version, replacing older 36V throttles with short round plugs, particularly for Jetson Atlas models. It features a longer wire for improved installation flexibility.

4. Konfigurazioa eta instalazioa

The KH-DX 36V Throttle is designed for plug-and-play installation, simplifying the replacement process. No complex wiring or color matching is required.

4.1. Instalazio aurreko egiaztapen-zerrenda

• Ensure your ebike's power is completely off and the battery is disconnected.
• Confirm the existing throttle's connector type matches the 6-pin connector of the new throttle.
• Gather necessary tools (e.g., Allen wrenches for handlebar components, if needed).

4.1. irudia: Xehetasuna view of the 6-pin male connector, ensuring compatibility with your ebike's wiring harness.

4.2. irudia: Xehetasuna view of the 6-pin female connector, which connects to the ebike's existing wiring.

4.2. Instalazio urratsak

1. Carefully remove the old throttle from the handlebar. This may involve loosening screws or clamps.
2. Disconnect the old throttle's wiring harness from the ebike's main wiring. Note the location and routing of the cable.
3. Connect the new KH-DX 36V Throttle's 6-pin connector to the corresponding connector on your ebike. Ensure a firm and secure connection.
4. Slide the new throttle onto the handlebar. Position it comfortably and securely, then tighten any clamps edo torlojuak.
5. Route the cable neatly along the handlebar and frame, securing it with cable ties if necessary, to prevent interference with moving parts.
6. Reconnect the ebike battery and turn on the power to test the throttle's functionality.

5. Funtzionamendu-argibideak

Using the KH-DX 36V Throttle is straightforward, providing intuitive control over your ebike's speed and power.

5.1. Azeleragailuaren funtzionamendua

• To accelerate, gently twist the throttle grip towards you. The more you twist, the faster the ebike will go.
• To decelerate, release the throttle grip. It will automatically return to the neutral position.

5.2. Cruise Control Function

The integrated cruise control button allows you to maintain a constant speed without continuously holding the throttle.

• To activate cruise control: Reach your desired speed, then press the cruise control button. The ebike will maintain this speed.
• To deactivate cruise control: Lightly apply the brakes or twist the throttle again. This will disengage the cruise control function.

5.3. Potentzia-adierazleak

The throttle features 4 LED power indicators that display the remaining battery charge. Monitor these lights to understand your ebike's power status and plan your rides accordingly.

6. Mantentzea

Proper maintenance ensures the longevity and optimal performance of your KH-DX 36V Throttle.

• Garbiketa: Wipe the throttle clean with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the rubber grip or plastic housing.
• Ikuskapena: Periodically check the throttle for any signs of wear, damage, or loose connections. Ensure the cable is not pinched or frayed.
• Kableen kudeaketa: Ensure the throttle cable is securely routed and not interfering with any moving parts of the ebike.
• Biltegiratzea: If storing the ebike for an extended period, ensure the throttle is clean and protected from extreme temperatures or direct sunlight.

7. Arazoak

If you encounter issues with your KH-DX 36V Throttle, refer to the following common problems and solutions.

If you are unable to resolve an issue using the troubleshooting guide, it is recommended to seek assistance from a qualified ebike technician or the product seller.

8. Zehaztapenak

9. Bermea eta Laguntza

This product does not come with a manufacturer's warranty. For any issues or support inquiries, please contact the seller directly through your purchase platform.