1. Sarrera
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E3 Dual Motor Electric Standing Desk. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Segurtasun informazio garrantzitsua
To prevent injury and ensure optimal performance, please adhere to the following safety guidelines:
- Erabili aurretik, ziurtatu beti mahaia behar bezala muntatuta eta egonkor dagoela.
- Ez gainditu gehienezko pisu-muga 220 lb (100 kg).
- Be cautious when adjusting the desk height to avoid injury from pinching or crushing. Ensure no objects or body parts are in the path of the moving desk.
- Mantendu haurrak eta maskotak mahaitik urrun funtzionamenduan zehar.
- Ez eseri edo zutik jarri mahaian.
- Erabili emandako energia-egokitzailea eta osagaiak soilik.
- Zarata edo mugimendu ezohikoren bat gertatzen bada, berehala utzi funtzionamenduari eta deskonektatu mahaia.
3. Konfigurazioa eta Muntaketa
The FLEXISPOT E3 desk requires assembly. It typically arrives in two separate packages. While the lower frame assembly is straightforward, the desktop may require drilling approximately 20 holes for secure attachment. It is recommended to have two people for assembly due to the weight of the components.
3.1. Paketearen edukia
Verify that all components are present before beginning assembly. Refer to the included assembly guide for a complete list of parts.
3.2. Muntaketa Urratsak
- Deskonprimitu osagai guztiak eta jarri gainazal garbi eta leun batean marradurak saihesteko.
- Assemble the desk frame according to the detailed instructions provided in the separate assembly guide.
- Attach the desktop to the assembled frame. Ensure proper alignment before securing with screws. Note that pre-drilled holes may not be present on the desktop, requiring careful drilling.
- Connect the control panel and power cables as instructed.
- Place the desk in its desired location, ensuring it is level and stable.
4. Funtzionamendu-argibideak
The FLEXISPOT E3 desk features a dual-motor system for smooth and quiet height adjustments, controlled by a programmable panel.
4.1. Kontrol panela baino gehiagoview
The control panel allows you to raise or lower the desk and save preferred height positions.
- Up/Down Arrows (↑ / ↓): Press and hold to continuously adjust the desk height. Release to stop at the desired level.
- Memoria aurrezarpenak (1, 2, 3, 4): These buttons allow you to save and recall up to four custom height settings.
4.2. Memoria aurrezarpenak ezartzea
- Egokitu mahaia nahi duzun altuerara gora/behera geziak erabiliz.
- Press the 'M' or 'Set' button (if available, or follow specific instructions for your panel) followed by one of the number buttons (1, 2, 3, or 4). The display may flash or beep to confirm the setting is saved.
- To recall a saved height, simply press the corresponding number button. The desk will automatically move to that preset height.
4.3. Dual Motor Operation
The E3 desk is equipped with dual motors, providing seamless and silent operation (under 50 dB). This design allows for a higher weight capacity and smoother transitions between sitting and standing positions.
4.4. Pisu Ahalmena
The desk is engineered to support up to 220 lb (100 kg), providing a sturdy and reliable workstation for various tasks and equipment.
4.5. Talkaren aurkako sistema
The desk is equipped with an anti-collision system that detects resistance during height adjustment. If an obstacle is encountered, the desk will automatically stop and reverse slightly to prevent damage or injury.
5. Mantentzea
Mantentze-lan erregularrak zure zutikako mahaiaren iraupena eta errendimendu optimoa bermatzen ditu.
- Garbiketa: Garbitu mahaigaina eta markoa zapi leun batekinamp oihal. Saihestu akabera kaltetu dezaketen produktu kimiko gogorrak edo garbitzaile urratzaileak.
- Kableen kudeaketa: Periodically check and organize cables to prevent tangles and ensure they do not interfere with the desk's movement.
- Loturak: Noizean behin, egiaztatu torloju eta azkoin guztiak ondo estutu direla. Beharrezkoa bada, berriro estutu.
- Motorren ikuskapena: Ensure the motor and electrical connections are free from dust and debris. Do not attempt to open the motor housing.
6. Arazoak
If you encounter issues with your FLEXISPOT E3 desk, refer to the following common problems and solutions:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Mahaia ez da mugitzen edo ez da kontrolei erantzuten. | Power cable disconnected, circuit breaker tripped, control panel malfunction. | Check all cable connections. Ensure the power outlet is functional. Try unplugging and replugging the desk after 30 seconds. |
| Mahaia modu irregularrean mugitzen da edo zarata ezohikoak egiten ditu. | Karga irregularra, lotura solteak, oztopoak. | Ensure weight is evenly distributed. Check and tighten all assembly fasteners. Remove any obstructions. |
| Error codes displayed (e.g., ASR/E20). | Motor overload, sensor issue, or internal fault. | Unplug the desk for at least 10 minutes, then plug it back in. If the error persists, contact customer support. Avoid exceeding the weight limit. |
| Talkaren aurkako sistema maiz aktibatzen da. | Obstruction, sensitive setting. | Ensure there are no objects in the desk's path. Refer to the full manual for instructions on adjusting anti-collision sensitivity if available. |
If the problem persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.
7. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | FLEXISPOT |
| Eredua | E3 |
| Produktuaren neurriak | 55.1" L x 27.5" W x 27.6" H |
| Kolorea | Marko zuria + Goiko aldea zuria |
| Estiloa | Modernoa |
| Oinarrizko materiala | Metala |
| Goiko material mota | Egurra |
| Akabera mota | Egurra |
| Ezaugarri Berezia | corded |
| Altzarien akabera | Zuria |
| Tamaina | 55"x28" Pieza osoa |
| Dakarten osagaiak | Keyboard Tray, Monitor Arm (Note: Components may vary by package) |
| UPC | 840460427586 |
| Item Height (Adjustable Range) | 27.6 inches (Min) to 46.8 inches (Max) |
| Gehienezko pisuaren gomendioa | 220 libra (100 kg) |
| Beharrezko muntaia | Bai |
| Motor Mota | Motor Bikoitza |
| Zarata Maila | 50 dB azpitik |
8. Bermea eta Laguntza
FLEXISPOTek berme-estaldura osoa eskaintzen du zure lasaitasunerako:
- 5 Urteko Estaldura: Mahaiaren markoari eta motorrari aplikatzen zaio.
- 2 Urteko Estaldura: Applies to the control panel and other electronics.
For any assistance, warranty claims, or technical support, please contact FLEXISPOT customer service. Refer to your purchase documentation or the official FLEXISPOT webharremanetarako datuak lortzeko gunea.