Memorex MX-PS1501 15-Inch PA Speaker Instruction Manual

Sarrera

Eskerrik asko erosketagatik.asing the Memorex MX-PS1501 15-Inch PA Speaker. This manual provides essential information for the safe and efficient operation of your new speaker. Please read this manual thoroughly before use and retain it for future reference.

Irudia: Aurrealdea view of the Memorex MX-PS1501 PA Speaker, showcasing its translucent cabinet and dynamic LED lighting around the woofer.

Segurtasun Informazioa

OHARRA: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not open the cabinet. Refer servicing to qualified personnel only.

KONTUZ: For continued protection against risk of fire, replace with the same type and value fuse indicated on the product. Refer to qualified service personnel for replacement.

• Irakurri argibide guztiak aparatua martxan jarri aurretik.
• Gorde jarraibide hauek etorkizuneko erreferentzia izateko.
• Kontuan izan gailuan eta funtzionamendu-argibideetan dauden abisu guztiak.
• Jarraitu argibide guztiak.
• Ez erabili aparatu hau uraren ondoan.
• Garbitu zapi lehor batekin bakarrik.
• Ez blokeatu aireztapen-irekidurak. Instalatu fabrikatzailearen argibideen arabera.
• Ez instalatu bero-iturri inongo ondoan, esate baterako, erradiadoreak, bero-erregistroak, sukaldeak edo beste aparatu batzuk (barne ampberoa sortzen duten argitzaileak).
• Ez zapaldu polarizatutako edo lurreko entxufearen segurtasun-helburua. Entxufe polarizatu batek bi pala ditu, bata bestea baino zabalagoa dutenak. Lurreratze-motako entxufe batek bi pala eta lurreko hirugarren ahoa ditu. Pala zabala edo hirugarren ahoa zure segurtasunerako eskaintzen dira. Emandako entxufea zure entxufean sartzen ez bada, kontsultatu elektrizista bati zaharkituta dagoen entxufea ordezkatzeko.
• Babestu korronte-kablea oinez ibiltzetik edo atxilotzetik, batez ere entxufeetan, erosotasun-harguneetan eta aparatutik irteten diren puntuetan.
• Erabili soilik fabrikatzaileak zehaztutako eranskinak/osagarriak.
• Erabili fabrikatzaileak zehaztutako edo aparatuarekin saltzen den saskiarekin, euskarria, tripodea, euskarria edo mahaiarekin soilik. Orga bat erabiltzen denean, kontuz ibili saskia/aparatuaren konbinazioa mugitzean, iraultzeagatik zauririk ez izateko.
• Deskonektatu aparatu hau tximista-ekaitzetan edo denbora luzez erabiltzen ez duzunean.
• Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari. Zerbitzua behar da aparatua edozein modutan hondatu denean, hala nola, elikatze-kablea edo entxufea hondatuta dagoenean, likidoa isuri denean edo objektuak aparatura erori direnean, aparatua euria edo hezetasuna jasan duenean, ez du normalean funtzionatzen. , edo erori egin da.

Paketearen edukia

Ziurtatu elementu guztiak bertan daudela paketea despaketatzean:

• Memorex MX-PS1501 PA Speaker
• Bozgorailua
• Kablezko Mikrofonoa
• Elikatze-kablea
• Hasiera Azkarreko Gida (ikusi eskuliburu hau argibide zehatzak lortzeko)

Produktua amaituview: Controls and Features

Familiarize yourself with the control panel and various inputs/outputs of your MX-PS1501 speaker.

Image: Rear control panel of the Memorex MX-PS1501 speaker, showing all inputs, outputs, and control knobs.

1. DSP Preset Select (4 Modes): Cycle through different Digital Signal Processing presets (e.g., Standard, Live, Monitor, Vocal) to optimize sound for various applications.
2. DSP Monitor: Display for current DSP mode and Bluetooth status.
3. USB zirrikitua: Insert a USB drive for audio playback.
4. Control Panel (TWS/Bluetooth/Volume+/-/Next Song/Play/Pause): Buttons for media control, Bluetooth functions, and TWS pairing.
5. Baxua: Maiztasun baxuko irteera doitzen du.
6. Bluetooth bolumen botoia: Controls the volume of Bluetooth audio input.
7. Mic Line Input Volume Knob: Adjusts the volume for microphone and line inputs.
8. Mic Line Input Volume Knob: (Duplicate label in image, likely for a second input or a master mic/line volume)
9. Treble botoia: Maiztasun handiko irteera doitzen du.
10. Mic/Line XLR Input: Connect microphones or line-level audio sources using an XLR cable.
11. Mic/Line XLR Input: (Duplicate label in image, likely a second XLR input)
12. Aux 3.5mm Input / RCA Input: Connect external audio devices via 3.5mm or RCA cables.
13. Mix XLR Output: Output for connecting to another speaker or audio system.
14. LED Switch Mode Button: Cycles through different LED lighting modes or turns them off.
15. AC etengailua: Turns the speaker power ON or OFF.
16. AC 110/230V Voltage Aldatu: Bolumen egokia hautatzen dutage zure eskualderako. Ensure this is set correctly before powering on.
17. AC Power Connect: Konektatu elikadura-kablea hemen.

The speaker features a 15-inch woofer for deep bass and a 1-inch titanium diaphragm tweeter for clear high frequencies, powered by a 180W RMS Bi-Amp AB klasea ampbiziagoa.

Image: Internal components of the Memorex MX-PS1501 speaker, showing the 1.35" tweeter, 3" voice coil, and 15" woofer.

Konfigurazioa

1. Despaketatzea: Kontu handiz atera bozgorailua eta osagarri guztiak paketetik.
2. liburukiatage Hautaketa: Locate the AC 110/230V Voltage Switch (Item 16 in Product Overview). Ensure it is set to the correct voltage for your region before connecting power. Vol. okerratagHautaketak unitatea kaltetu dezake.
3. Speaker Stand Assembly:
   • Extend the legs of the speaker stand to a stable position.
   • Adjust the height of the stand to your desired level and secure it with the locking pin and knob.
   • Carefully lift the MX-PS1501 speaker and place it onto the pole of the speaker stand. Ensure it is seated securely.
4. Potentzia-konexioa: Connect the supplied power cable to the AC Power Connect port (Item 17) on the speaker and then to a suitable power outlet.
5. Hasierako piztea: Flip the AC Power Switch (Item 15) to the 'ON' position. The speaker's display and LED lights should activate.

Funtzionamendu-argibideak

Piztu/Itzali

• To turn on, ensure the voltage switch is correct, then press the AC Power Switch to 'ON'.
• To turn off, press the AC Power Switch to 'OFF'.

Bluetooth parekatzea

1. Turn on the MX-PS1501 speaker.
2. The speaker will automatically enter Bluetooth pairing mode. The DSP Monitor (Item 2) will show "Bluetooth" and may flash.
3. Zure gailu mugikorrean (smartphone-a, tableta, etab.), gaitu Bluetooth-a eta bilatu eskuragarri dauden gailuak.
4. Select "MX-PS1501" from the list of devices.
5. Once paired, the speaker will indicate a successful connection, and the DSP Monitor will show "Bluetooth" steadily.
6. Adjust the Bluetooth Volume Knob (Item 6) and your device's volume to control the audio output.

True Wireless Stereo (TWS) parekatzea

TWS allows you to connect two MX-PS1501 speakers wirelessly for a stereo sound experience.

Image: Two Memorex MX-PS1501 speakers operating in True Wireless Stereo (TWS) mode, enhancing the audio experience.

1. Ensure both MX-PS1501 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the master speaker), press and hold the TWS button (part of Item 4, Control Panel) for a few seconds until you hear a prompt or see an indicator.
3. The master speaker will search for the second speaker.
4. Once connected, both speakers will indicate successful TWS pairing.
5. Orain, konektatu zure gailu mugikorra bozgorailu nagusira Bluetooth bidez, goian azaldu bezala. Audioa bi bozgorailuetatik erreproduzituko da estereoan.

USB/SD erreprodukzioa

1. Insert a USB drive into the USB Slot (Item 3) or an SD card into the designated slot (if available, not explicitly shown but mentioned in description).
2. The speaker should automatically detect the media and begin playback.
3. Use the Control Panel buttons (Item 4) for Play/Pause, Next Song, and Volume adjustments.

Mikrofono/Line Sarrera

1. Connect your wired microphone or line-level audio source (e.g., mixer, instrument) to the Mic/Line XLR Input (Item 10 or 11).
2. Adjust the Mic Line Input Volume Knob (Item 7 or 8) to control the input level.

Sarrera Aux

1. Connect an external audio device (e.g., laptop, MP3 player) to the Aux 3.5mm Input / RCA Input (Item 12) using the appropriate cable.
2. Adjust the volume from your connected device and the master volume on the speaker.

LED Argiztapen Kontrola

• Press the LED Switch Mode Button (Item 14) to cycle through various lighting effects.
• Continue pressing to turn the LED lights off.

DSP moduak

• Use the DSP Preset Select (Item 1) to choose from available sound modes like Standard, Live, Monitor, or Vocal.
• The selected mode will be displayed on the DSP Monitor (Item 2).

Mantentzea

• Garbiketa: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the speaker. Do not use liquid cleaners or abrasive materials.
• Biltegiratzea: Denbora luzez erabiltzen ez baduzu, gorde bozgorailua leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik urrun.
• Aireztapena: Ensure the speaker's ventilation openings are not blocked to prevent overheating.

Arazoak konpontzea

Zehaztapenak

Technical specifications for the Memorex MX-PS1501 PA Speaker:

Irudia: Albokoa eta aurrealdea views of the Memorex MX-PS1501 speaker, illustrating its physical dimensions.

Bermea eta Laguntza

The Memorex MX-PS1501 PA Speaker comes with a 1 urteko berme mugatua erosketa-datatik aurrera. Berme honek materialen eta fabrikazioaren fabrikazio-akatsak estaltzen ditu erabilera normalaren pean.

For warranty claims, technical support, or service inquiries, please contact Memorex customer support. Please have your model number (MX-PS1501) and proof of purchase ready.

Contact information for Memorex customer support is typically found on the manufacturer's webgunean edo produktuaren ontzian sartuta.