CREWORKS 6L Ultrasonic Cleaner User Manual

1. Sarrera

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 6L Ultrasonic Cleaner. This device utilizes ultrasonic cavitation to thoroughly clean various items, offering both Degas and Gentle cleaning modes for optimal results. Please read this manual carefully before use and retain it for future reference.

2. Segurtasun informazioa

Konektatu beti unitatea lurrera konektatutako entxufe batera.
Ez erabili garbigailua deposituan likidorik gabe.
Ensure the power cord is not damaged and avoid pulling it to disconnect.
Keep the unit away from water or other liquids to prevent electric shock.
Ez sartu unitate nagusia uretan.
Deskonektatu unitatea garbitu edo mantentze-lanak egin aurretik.
Mantendu haurren eskura.
Use only recommended cleaning solutions. Avoid flammable or corrosive liquids.
Do not touch the tank or solution during operation, as it may become hot.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

CREWORKS 6L Ultrasonic Cleaner Unit
Stainless Steel Cleaning Basket
Estalkia
Elikatze kablea
34 fl oz (1000 mL) CREWORKS Heavy Duty Cleaner & Degreaser Solution
Erabiltzailearen eskuliburua (dokumentu hau)

4. Konfigurazioa

Lekua: Place the ultrasonic cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
Depositua bete: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the 'MIN' and 'MAX' marks. For general cleaning, use water. For enhanced cleaning, use the provided CREWORKS Heavy Duty Cleaner & Degreaser solution diluted at a 1:10 ratio with water.
Saskia sartu: Jarri garbiketa-saskia deposituan.
Konektatu energia: Plug the power cord into the unit's power inlet, then connect it to a grounded electrical outlet.

CREWORKS 6L Ultrasonic Cleaner with lid open and basket inside — Image: The CREWORKS 6L Ultrasonic Cleaner with its lid open, showing the stainless steel tank and cleaning basket ready for filling with solution.

5. Funtzionamendu-argibideak

The CREWORKS 6L Ultrasonic Cleaner features intuitive controls for temperature, time, and cleaning modes.

Close-up of CREWORKS Ultrasonic Cleaner control panel with temperature and timer knobs — Irudia: Xehetasun zehatza view of the control panel, highlighting the temperature and timer adjustment knobs, along with indicators for Degas and Gentle modes.

Piztu: Turn the main power switch to the 'ON' position. The digital display will illuminate.
Ezarri Tenperatura: Use the 'TEMP' knob to set the desired cleaning temperature. The temperature range is 70-210°F (20-100°C). Heating helps improve cleaning efficiency, especially for stubborn grime.
Ezarri tenporizadorea: Use the 'TIME' knob to set the cleaning duration. The timer can be set from 1 to 30 minutes. For delicate items, start with a shorter duration.
Aukeratu garbiketa modua:
- Gasifikazio modua: Press the 'DEGAS' button. This mode removes dissolved gases from the cleaning solution, which can improve ultrasonic efficiency and prevent oxidation of cleaned objects. It is recommended to run a degas cycle for a few minutes when using fresh solution.
- Modu leuna: Press the 'GENTLE' button. This mode reduces the ultrasonic intensity, providing a softer cleaning action suitable for delicate or sensitive items that might be damaged by full power cavitation.
Hasi garbitzen: Once temperature, time, and mode are set, press the 'ON/OFF' button to start the ultrasonic cleaning process. The unit will automatically stop when the timer expires.
Garbitu ondoren: Turn off the unit, unplug it, and carefully remove the cleaning basket. Rinse the cleaned items with clean water and dry them thoroughly.

CREWORKS Ultrasonic Cleaner cleaning a pair of glasses — Image: The ultrasonic cleaner in operation, effectively cleaning a pair of eyeglasses submerged in the solution within the basket.

CREWORKS Ultrasonic Cleaner with various items it can clean, including tools, toys, tableware, oral appliances, and glasses — Image: A visual representation of the wide range of applications for the ultrasonic cleaner, showing examples of items such as tools, toys, tableware, oral appliances, and glasses.

6. Using the CREWORKS Heavy Duty Cleaner & Degreaser Solution

The included 34 fl oz CREWORKS Heavy Duty Cleaner & Degreaser solution is designed to enhance the cleaning power of your ultrasonic cleaner, particularly for stubborn grease, oil, and grime.

Image: The CREWORKS Heavy Duty Cleaner & Degreaser solution bottle, formulated for effective cleaning and degreasing.

Diluzioa: This is a concentrated solution. Dilute it with water at a 1:10 ratio (1 part solution to 10 parts water) before adding it to the ultrasonic cleaner tank.
Aplikazioak: Ideal for cleaning engine parts, carburetors, gun parts, electronic components, bicycle chains, metals, and plastics. It effectively removes grease buildup, persistent residues, tight corner grime, and stubborn stains.
Bateragarritasuna: Safe for use with most metals, alloys, and plastics. Always test on an inconspicuous area first if unsure.

Various items that can be cleaned with CREWORKS Heavy Duty Cleaner & Degreaser, including electronic components, carburetors, gun parts, engine parts, bicycle chains, metals, and plastics — Image: An illustration showing the diverse range of items that can be effectively cleaned using the CREWORKS Heavy Duty Cleaner & Degreaser solution.

Before and after images of a bicycle chain cleaned with CREWORKS Heavy Duty Cleaner & Degreaser, showing visible cleaning effect — Image: A comparison demonstrating the visible cleaning effect of the solution, with a dirty bicycle chain shown before cleaning and a sparkling clean chain after treatment.

7. Mantentzea eta Garbiketa

Depositua hustutzea: After each use, especially with cleaning solutions, drain the tank. Use the drain valve located on the side of the unit to empty the liquid into a suitable container.
Depositua garbitzea: Garbitu altzairu herdoilgaitzezko depositua ur garbiarekin. Garbitu unitatearen barrualdea eta kanpoaldea oihal leun eta lehor batekin.amp oihalik gabe. Ez erabili garbitzaile urratzailerik eta ez murgildu unitate nagusia uretan.
Biltegiratzea: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and moisture.

8. Arazoak

Arazoa	Kausa posiblea	Irtenbidea
Unitatea ez da pizten	Ez dago energia-iturririk; kable elektrikoa askatuta; etengailu nagusia itzalita	Check power outlet; Ensure power cord is securely plugged in; Turn main switch to 'ON'
Ultrasoinu funtzioa ez dabil	No liquid in tank; Timer not set; Unit overheated	Fill tank with liquid; Set timer; Allow unit to cool down
Garbiketa emaitza txarrak	Incorrect cleaning solution; Insufficient cleaning time/temperature; Overloaded tank; Degas cycle not performed	Use appropriate solution (e.g., CREWORKS Degreaser); Increase time/temperature; Do not overload; Run a degas cycle for fresh solution
Solution not heating	Heater not activated; Temperature set too low	Ensure temperature knob is set above ambient; Allow time for heating

9. Zehaztapenak

Eredua: CREWORKS 6L Ultrasonic Cleaner
Deposituaren edukiera: 6 litro
Ultrasoinu potentzia: 180W
Berokuntza-potentzia: 300W
Ultrasoinu maiztasuna: 40 kHz
Tenperatura kontrola: 70-210 °F (20-100 °C)
Tenporizadorearen kontrola: 1-30 minutu
Moduak: Degas, Gentle
Garbiketa irtenbidea: CREWORKS Heavy Duty Cleaner & Degreaser (34 fl oz)
ASIN: B0DYJCGRNQ
Lehen eskuragarri dagoen data: 26ko otsailaren 2025a

10. Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please refer to the official CREWORKS webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzura zuzenean. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

	CREWORKS Ultrasoinuzko Garbitzaile Digitalaren Erabiltzaile Eskuliburua CREWORKS Ultrasoinuzko Garbigailu Digitalaren erabiltzailearen eskuliburua, funtzionamendua, ezaugarriak, segurtasun neurriak eta arazoak konpontzea zehaztuz.
	CREWORKS KZ-S10 Ultrasoinuzko Garbitzailearen Erabiltzaile Eskuliburua CREWORKS KZ-S10 garbigailu ultrasoniko digitalaren erabiltzailearen eskuliburu osoa, funtzionamendua, zehaztapenak, segurtasun-informazioa, mantentze-lanak eta arazoak konpontzea zehaztuz.
	CREWORKS YM-008 Ultrasoinuzko Garbigailuaren Erabiltzaile Eskuliburua CREWORKS YM-008 Ultrasoinuzko Garbigailuaren erabiltzailearen eskuliburua. 35W-ko eta 0.8L-ko ultrasoinuzko garbiketa-makina digital honen sarrera, zehaztapenak, produktuaren diagrama, segurtasun-informazioa, funtzionamendu-argibideak eta mantentze-jarraibideak eskaintzen ditu.
	Ultrasoinuzko garbitzailearen erabiltzailearen eskuliburua - Funtzionamendua, segurtasuna eta zehaztapenak CREWORKS ultrasoinuzko garbigailuen erabiltzailearen eskuliburu osoa, funtzionamendua, segurtasun jarraibideak, produktuaren zehaztapenak, paketearen edukia, mantentze-lanak eta gomendatutako garbiketa ezarpenak biltzen dituena. TH-30Atik TH-100Ara bitarteko modelo zenbakiak eta erlazionatutako DUC serieak barne hartzen ditu.
	CREWORKS Ultrasoinu Garbigailuaren Erabiltzaile Eskuliburua - Funtzionamendua, Segurtasuna eta Zehaztapenak CREWORKS ultrasoinuzko garbigailuaren erabiltzailearen eskuliburu osoa, JX-009S, JX-010S, JX-020S eta JX-031S modeloen segurtasun-argibideak, zehaztapenak, funtzionamendu-prozedurak, mantentze-lanak eta arazoak konpontzea biltzen dituena.
	Manuale Utente Pulitore ad Ultrasuoni CREWORKS Manuale utente completo per il pulitore ad ultrasuoni CREWORKS, che copre specifiche, istruzioni per l'uso, manutenzione e risoluzione dei problemi.