67100. orbita

Orbit 67100 1/4" Barb Drip Irrigation Multi-Stream Emitter Instruction Manual

Eredua: 67100

Sarrera

The Orbit 67100 Multi-Stream Drip Emitter is designed for precise micro-watering in various garden settings. It delivers a gentle, full-pattern multi-stream spray, ideal for annuals, shrubs, perennials, or container plants. This emitter allows for adjustable water flow to suit specific plant needs and conserve water.

Produktua amaituview

The multi-stream drip emitter features a 1/4-inch barb inlet for direct connection to 1/4-inch drip tubing. It also includes a 10-32 male thread (MT) for optional connection to drip stakes. The emitter's head is adjustable, allowing users to control the spray radius and flow rate.

Orbit 67100 Multi-Stream Drip Emitter

Image: The Orbit 67100 Multi-Stream Drip Emitter, a black plastic component with a ribbed top and a barb connection at the bottom. The top surface shows markings for flow adjustment.

Ezaugarri nagusiak:

Konfigurazioa eta Instalazioa

  1. Hodiak prestatu: Ensure your 1/4-inch drip tubing is cut to the desired length and free of debris.
  2. Connect to Tubing: Push the 1/4-inch barb inlet of the emitter directly into the end of the 1/4-inch drip tubing. For easier insertion, you may briefly warm the end of the tubing in warm water.
  3. Optional Drip Stake Connection: If using a drip stake, connect the 10-32 male thread of the emitter to a drip stake with a 10-32 female thread.
  4. Lekua: Position the emitter near the base of the plant you wish to water. Use a drip tubing Y-anchor stake if needed to secure the emitter in place.
  5. Ur iturriaren konexioa: Connect the 1/4-inch drip tubing to your main drip manifold, a 1/2-inch drip tubing lateral line, or directly to a hose faucet using a 1/4-inch hose faucet adapter.
  6. Sistemaren egiaztapena: Before final operation, briefly turn on the water supply to check for leaks and proper emitter function.

Funtzionamendu-argibideak

The Orbit 67100 Multi-Stream Drip Emitter allows for easy adjustment of water flow and spray radius.

Ur-emaria doitzea:

The top of the emitter features a rotating head with markings for adjustment. To decrease the spray radius and water flow, rotate the multi-stream head clockwise towards the "minus" symbol. To increase the spray radius and water flow, rotate the head counter-clockwise towards the "plus" symbol. You can also shut off the flow completely by rotating it fully clockwise.

The recommended operating pressure for this emitter is 30 PSI. For optimal water conservation, consider integrating the system with an Orbit B-hyve smart controller.

Mantentzea

Arazoak konpontzea

ArazoaKausa posibleaIrtenbidea
Ur-fluxurik ez edo emari murriztuaClogged emitter; insufficient water pressure; emitter turned off.Clean the emitter; check water supply pressure; rotate emitter head to increase flow.
Leaking at connection pointImproperly seated tubing; damaged barb.Ensure tubing is fully pushed onto the barb; replace emitter if barb is damaged.
Spray eredu irregularraPartial clog; incorrect adjustment.Clean the emitter nozzles; adjust the emitter head for desired pattern.

Zehaztapenak

Bermea eta Laguntza

Bermeari buruzko informazioa edo laguntza teknikoa lortzeko, jo Orbit-en webgune ofizialera. webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria berme-erreklamazioetarako.

Harremanetarako informazioa: Mesedez, bisitatu Orbit denda Amazonen or the official Orbit webwebgunean laguntza-xehetasun eguneratuenak lortzeko.