Maxxima MEL-S1013100W LED Outdoor Flood Wall Light Instruction Manual

1. Segurtasun informazioa

Produktu hau instalatu edo erabili aurretik, irakurri eta ulertu argibide guztiak. Argibide hauek jarraitzen ez badira, deskarga elektrikoak, sua edo bestelako arriskuak gerta daitezke, eta horrek kalte materialak edo lesio pertsonalak eragin ditzake.

• Instalazioa edo mantentze-lanak egin aurretik, itzali beti korrontea etengailutik.
• Instalazio-prozesuari buruz ziur ez bazaude, kontsultatu elektrizista kualifikatu batekin.
• Ziurtatu konexio elektriko guztiak ondo daudela eta tokiko araudi eta ordenantzak betetzen dituztela.
• Do not install on a dimmer switch.
• Aparatu hau kanpoan erabiltzeko diseinatuta dago eta urarekiko erresistentea da.

2. Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela.

• LED Outdoor Flood Wall Light (1 unit)
• Muntatzeko hardwarea (torlojuak, kable konektoreak)
• Junta
• Argibide eskuliburua

Figure 2.1: Product components and adjustable parts.

3. Produktuaren ezaugarriak

The Maxxima LED Outdoor Flood Wall Light is designed for reliable outdoor security and illumination.

• Argiztapen indartsua: Delivers 950 lumens of 3000K warm white light with an energy-efficient 13W design.
• Mugimenduen detekzio aurreratua: PIR motion sensor with up to a 70 ft range.
• Adjustable Timers: Choose from 1, 5, or 10 minutes for how long the light stays on after motion detection.
• Iluntzetik egunsentiko sentsorea: Photocell sensor automatically operates at night and conserves energy during the day.
• Buru erregulagarria: Easily direct the light beam with a 180° vertical tilt.
• Adjustable Arm and Sensor: 90° vertical arm tilt and 180° vertical tilt & horizontal swivel for the motion sensor, with 360° sensor rotation.
• Eraikuntza iraunkorra: Built with aluminum, rated for 50,000 lifetime hours, ETL listed.

4. Instalazioa

4.1 Gailua muntatzea

1. Itzali etengailuan instalazioa hasi aurretik.
2. Remove the existing fixture (if any) and disconnect wiring.
3. Attach the mounting plate to the junction box using the provided screws. Ensure the gasket is properly seated between the fixture and the mounting surface for a weather-tight seal.
4. Feed the electrical wires from the junction box through the center hole of the mounting plate.

4.2 Kableatutako konexioak

Konektatu hariak honela:

• Konektatu Beltza kablea aparatutik gailuaraino Beltza (Live/Hot) wire from the junction box.
• Konektatu Zuria kablea aparatutik gailuaraino Zuria (Neutral) wire from the junction box.
• Konektatu Berdea (Ground) wire from the fixture to the Berdea or bare copper (Ground) wire from the junction box.
• Secure all connections with the provided wire connectors.

Figure 4.1: Wiring connections for the flood light.

4.3 Azken Batzarra

1. Kontu handiz sartu hari guztiak lotura-kutxan.
2. Align the fixture with the mounting plate and secure it with the remaining screws.
3. Berrezarri energia etengailuan.

Figure 4.2: Installed flood light on an exterior wall.

5. Konfigurazioa eta doikuntzak

The flood light features adjustable settings for the motion sensor and timer.

5.1 Adjusting the Sensor and Timer

The sensor unit has two adjustable dials located on its underside:

• TIMER Dial: Controls how long the light stays on after motion is detected. Options include 1 minute, 5 minutes, 10 minutes, or Dusk-to-Dawn (D2D).
• SENSITIVITY Dial: Adjusts the motion detection range. Options include 10 ft, 20 ft, 50 ft, or MAX (up to 70 ft).

To adjust, gently rotate the dials to your desired setting. The 'Test' mode on the TIMER dial allows for quick testing of motion detection during daylight hours.

Figure 5.1: Timer and Sensitivity adjustment dials.

5.2 Adjusting Light Head and Sensor Position

The light head and motion sensor can be adjusted to cover specific areas:

• The light head can be tilted up to 180° vertically.
• The arm connecting the sensor to the base can tilt 90° vertically.
• The motion sensor itself can tilt 180° vertically and swivel 180° horizontally, with a full 360° rotation capability.

Figure 5.2: Adjustable light head and motion sensor.

6. Funtzionamendu-argibideak

Once installed and configured, the Maxxima LED Outdoor Flood Wall Light operates automatically based on its sensor settings.

• Dusk-to-Dawn Mode (D2D): When the TIMER dial is set to D2D, the light will automatically turn on at dusk and remain on until dawn, regardless of motion.
• Mugimendu-sentsore modua: When the TIMER dial is set to 1, 5, or 10 minutes, the light will activate when motion is detected within the set sensitivity range and ambient light conditions (typically at night). The light will remain on for the selected duration after the last motion is detected, then turn off.
• Proba modua: Setting the TIMER dial to 'Test' allows you to verify motion detection during daylight. The light will turn on for a few seconds when motion is detected, then turn off. This mode is useful for positioning the sensor.

7. Mantentzea

This LED flood light requires minimal maintenance.

• Garbiketa: Aldian-aldian garbitu aparatua zapi leun batekin,amp oihal bat erabili zikinkeria eta hondakinak kentzeko. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Ikuskapena: Regularly check for any loose connections or damage to the wiring or housing.
• The integrated LED light source is not user-replaceable.

8. Arazoak

If you experience issues with your flood light, refer to the following table for common problems and solutions.

9. Zehaztapenak

10. Bermea

This Maxxima LED Outdoor Flood Wall Light is backed by a 3 urteko bermea erosketa-datatik aurrera. Berme honek materialen eta fabrikazioaren akatsak estaltzen ditu erabilera normalaren pean. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.

11. Laguntza

For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer service.

Visit the Maxxima Store: MaxximaLEDLighting on Amazon

Maxxima is an American company with USA-based offices and customer service.