AM ARROWMAX Smart Mini Electric Engraving Pen & Carving Bits User Manual

1. Sarrera

This manual provides essential instructions for the safe and effective use of your AM ARROWMAX Smart Mini Electric Engraving Pen and its accompanying carving bits. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Produktua amaitu daview

2.1 Paketearen edukia

• AM ARROWMAX Smart Mini Electric Engraving Pen (SGS PRO)
• Kargatzeko kable magnetikoa
• 30 Engraving Bits
• 12 Polishing Bits
• Biltegiratze-zorroa
• Erabiltzailearen eskuliburua

This image displays the complete AM ARROWMAX Smart Mini Electric Engraving Pen kit, including the pen, its protective case, a USB charging cable, a variety of engraving and polishing bits, and an illustration of its smart app connectivity.

2.2 Funtsezko osagaiak

Irudi honek xehetasunak eskaintzen ditu view of the SGS MAX engraving pen, labeling its key components: the Magnetic Charging Port for easy charging, the Status Display showing battery, mode, and rotation direction, the Power Button for control, the durable Aluminium Alloy Body, and the Chuck for bit changes.

• Kargatzeko ataka magnetikoa: For convenient and secure charging of the device.
• Egoera bistaratzea: Shows battery level, selected speed mode, and rotation direction.
• Pizteko botoia: Pizteko/itzaltzeko eta moduaren hautaketa kontrolatzen du.
• Aluminiozko Aleaziozko Gorputza: Iraunkortasuna eta helduleku erosoa eskaintzen ditu.
• Chuck: Securely holds engraving and polishing bits.

2.3 Engraving and Polishing Bits

The kit includes a comprehensive set of 30 engraving bits and 12 polishing bits, designed for various materials and applications. These bits feature a 2.35mm shank for compatibility.

This image showcases the comprehensive set of 30 engraving bits and 12 polishing bits that come with the ARROWMAX engraving pen, designed for various crafting tasks.

This detailed diagram categorizes and names various engraving bit types, including sharp needle, torch, oval, spherical, bullet, round tipped needle, ladder, round headed cylinder, flat headed cylinder, and inverted ladder types, providing clarity on their specific uses.

This image focuses on the construction of an engraving bit, emphasizing its Diamond Steel material for long life and precise cuts, and its 2.35mm shank with surface blasting for compatibility with most rotary tools.

3. Konfigurazioa

3.1 Gailua kargatzea

1. Connect the magnetic charging cable to the charging port on the engraving pen.
2. Connect the other end of the USB cable to a compatible 5V USB power adapter (not included).
3. The status display will indicate the charging progress. Ensure the device is fully charged before first use.

3.2 Attaching/Changing Bits

1. Ensure the engraving pen is powered off.
2. Gently insert the desired engraving or polishing bit into the chuck until it is seated firmly.
3. To remove a bit, pull it straight out from the chuck. No additional tools are required.

4. Funtzionamendu-argibideak

4.1 Piztu/Itzali

Press and hold the Power Button for a few seconds to turn the device on or off.

4.2 Adjusting Speed Modes

The engraving pen features 5 RPM modes for precise control:

This diagram illustrates the five adjustable speed modes of the engraving pen: 'A' for Auto Sensing (10000-30000 RPM), '1' for Low (15000 RPM), '2' for Medium (20000 RPM), '3' for High (25000 RPM), and '4' for Maximum (30000 RPM).

• Mode A (Auto Sensing): Automatically adjusts speed between 10,000-30,000 RPM based on your twist angle.
• 1. modua (baxua): 15,000 RPM
• 2. modua (ertaina): 20,000 RPM
• 3. modua (Altua): 25,000 RPM
• Mode 4 (Maximum): 30,000 RPM

To change the speed mode, short press the Power Button while the device is on. The status display will show the current mode.

4.3 Errotazio-norabidea aldatzea

The device supports both forward and reverse rotation. To toggle the direction, press the dedicated direction button (if available, otherwise refer to the specific model's controls) or follow the instructions on the status display. This allows for greater flexibility in engraving and polishing tasks.

4.4 Engraving and Polishing Tips

• Always wear appropriate eye protection during operation.
• Select the correct bit for your material and desired effect.
• Start with a lower speed setting and gradually increase as needed.
• Apply light, consistent pressure. Excessive force can damage the bit or the workpiece.
• Practice on scrap material before working on your final project.
• Ensure your workpiece is securely held to prevent movement during operation.

5. Mantentzea

5.1 Gailua garbitzea

• Ziurtatu gailua itzalita eta kargagailutik deskonektatuta dagoela garbitu aurretik.
• Wipe the body of the engraving pen with a soft, dry cloth.
• Use a small brush or compressed air to remove dust and debris from the chuck area.
• Ez erabili produktu kimiko gogorrik edo garbigailu urratzailea.

5.2 Bit Arreta

• Clean bits after each use to remove material residue.
• Store bits in their designated case to prevent damage and loss.
• Replace worn or damaged bits to maintain optimal performance and safety.

5.3 Bateria zaintzea

• Saihestu bateria maiz erabat deskargatzea.
• Gorde gailua leku fresko eta lehor batean erabiltzen ez duzunean.
• If storing for an extended period, charge the battery to approximately 50% every few months.

6. Arazoak

6.1 Gailua ez da pizten

• Ensure the battery is charged. Connect the device to the charger and check the status display.
• Press and hold the Power Button firmly for a few seconds.

6.2 Bit Not Holding Securely

• Ensure the bit is fully inserted into the chuck.
• Check if the bit shank is damaged or bent. Use only bits with a 2.35mm shank.

6.3 Poor Engraving/Polishing Performance

• Verify that the correct speed mode is selected for the material.
• Check if the bit is worn or dull. Replace if necessary.
• Ensure you are applying appropriate pressure; too much or too little can affect results.

7. Zehaztapenak

8. Segurtasun informazioa

Always adhere to the following safety guidelines when using the engraving pen:

• Begietako babesa: Beti eraman segurtasun-betaurrekoak edo babes-babesak begiak hegan doazen hondakinetatik babesteko.
• Lan eremua: Ensure your work area is well-lit and well-ventilated. Keep it clean and free of clutter.
• Lan-pieza segurua: Always secure the material you are working on to prevent it from moving unexpectedly.
• Proper Bits: Use only bits designed for the specific task and material.
• Saihestu ura: Do not operate the device near water or in damp baldintzak.
• Haurrak eta maskotak: Keep the device and all accessories out of reach of children and pets.
• Unplug Before Changing: Always ensure the device is powered off and disconnected from the charger before changing bits or performing maintenance.
• Saihestu gehiegi berotzea: If the device feels excessively hot, stop use and allow it to cool down.

9. Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please refer to the product packaging or contact ARROWMAX customer service directly. Keep your purchase receipt as proof of purchase.