LEONLITE 28W LED Security Light with GFCI Outlets Instruction Manual

1. Sarrera eta Overview

Thank you for choosing the LEONLITE 28W LED Security Light with GFCI Outlets. This product is designed to provide reliable outdoor illumination with enhanced functionality, featuring motion sensing, dusk-to-dawn operation, and integrated GFCI protected electrical outlets for convenient power access. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

2. Segurtasun informazioa

WARNING: Risk of Electric Shock. Turn off power at the fuse box or circuit breaker before installation. Only use on 120V/60Hz circuits.

• This product is rated for wet locations. Do NOT use where direct water exposure occurs, as this can lead to electric shocks.
• Do NOT use this product near any source of heat.
• Mantendu produktu hau 3 urtetik beherako haurren eskura.
• Ziurtatu kableatu-konexio guztiak ondo daudela eta tokiko araudi elektrikoak betetzen dituztela.

3. Paketearen edukia

The LEONLITE 28W LED Security Light package includes:

• 1 x LED segurtasun-argia
• 1 x Mounting Hardware Kit (including mounting bracket, screws, and wire nuts)
• 1 x Erabiltzailearen eskuliburua

4. Produktuaren ezaugarriak

• GFCI entxufe bikoitzak: Two built-in Ground Fault Circuit Interrupter (GFCI) outlets provide safe and reliable power for outdoor tools and appliances, eliminating the need for additional wiring or wall outlets.
• Bi argiztapen modu: Choose between Motion Sensor Mode (light activates at night when motion is detected) and Dusk to Dawn Mode (light remains on throughout the night and turns off automatically during the day).
• Argiztapen erregulagarria: Features 2500 lumens brightness from 28W LED, with adjustable lamp heads and a motion sensor that can be positioned for optimal coverage.
• Wide Detection Area: The motion sensor offers a 150° detection angle and a sensing range of 13ft to 45ft, suitable for various yard sizes.
• Configurable Delay: Set the light to stay on for 30s, 60s, or 120s after motion is no longer detected.
• Durable and Certified: ETL certified for quality and safety standards, designed for wet locations.

5. Konfigurazioa eta instalazioa

Follow these steps for proper installation. It is recommended to have a qualified electrician perform the installation if you are unfamiliar with electrical wiring.

1. Itzali energia: Before starting, ensure the power to the installation area is OFF at the circuit breaker.
2. Prestatu muntatzeko gainazala: Remove any existing fixture and ensure the electrical box is clear.
3. Instalatu muntatzeko euskarria: Secure the provided mounting bracket to the electrical box using the screws.
4. Kableatu konexioak: Konektatu aparatuaren kableak etxeko kableatuetara:
   • Konektatu berdea (lurrerako) kablea aparatutik gailuaraino copper or green ground wire from the electrical box.
   • Konektatu zuria (neutroa) kablea aparatutik gailuaraino zuria neutral wire from the electrical box.
   • Konektatu beltza kable (beroa) aparatutik gailuaraino beltza hot wire from the electrical box.
   Use the provided wire nuts to secure all connections.
5. Erantsi tresna: Carefully push the wired connections into the electrical box and secure the light fixture to the mounting bracket.
6. Egokitu Lamp Heads and Sensor: Adjust the two lamp heads and the motion sensor to your desired angles. The lamp heads are adjustable up to 320° horizontally and 120° vertically. The sensor is adjustable up to 170° horizontally and 140° vertically.
7. Berrezarri boterea: Piztu berriro korrontea etengailu elektrikoan.
8. Test GFCI Outlets: After powering on, press the 'RESET' button on the GFCI outlets to activate them. Press 'TEST' to ensure they trip, then 'RESET' to restore power.

Irudia: Wiring diagram showing connections for hot, neutral, ground, and control wires to the GFCI security light assembly.

Irudia: Diagram illustrating the adjustable range of the two lamp heads (320° horizontal, 120° vertical) and the motion sensor (170° horizontal, 140° vertical).

6. Funtzionamendu-argibideak

The security light offers two primary operating modes and adjustable settings for optimal performance.

Modu hautaketa

Use the control switches located on the bottom of the motion sensor to select your preferred mode and adjust settings.

Irudia: Close-up of the control switches for adjusting time delay (30s/60s/120s/TEST) and sensitivity (M/H/L) on the motion sensor.

• Mugimendu-sentsore modua: The light remains off during the day. At night, it activates when motion is detected within its sensing range and angle.
• Dusk to Dawn Mode (D2D): The light remains on throughout the night, regardless of motion detection, and automatically turns off during the day.

Ezarpenak doitzea

• Denbora atzerapena: Adjust the switch to set how long the light stays on after motion is no longer detected: 30s, 60s, or 120s. A 'TEST' mode is available for initial setup.
• Sentikortasuna: Adjust the switch to control the motion sensor's sensitivity (Low, Medium, High).

GFCI Saltokiak

The built-in GFCI outlets remain powered at all times as long as the main switch is on, regardless of the lighting mode or whether the light is on or off. Remember to press the 'RESET' button on the GFCI outlets after powering on to activate them.

Irudia: The LEONLITE security light illuminating a patio area at night, highlighting the convenience of the built-in GFCI outlets for powering outdoor appliances.

7. Mantentzea

• Garbiketa: Clean the fixture regularly with a soft, damp cloth. Do NOT use abrasive cleaners or solvents.
• GFCI probak: Test the GFCI outlets monthly by pressing the 'TEST' button. The outlet should trip, cutting off power. Press 'RESET' to restore power. If it does not trip, the GFCI may be faulty and should be replaced.
• Ikuskapena: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.

8. Arazoak

9. Zehaztapenak

Irudia: Detailed dimensions of the LEONLITE 28W LED Security Light, including measurements for the light heads, sensor, and main body.

10. Bermea eta Laguntza

This LEONLITE product comes with a generous 3-year warranty, ensuring top-notch quality and safety standards. For any support or warranty claims, please contact LEONLITE customer service through their official channels.