BaldrTherm Solar Photosensitive Three Channel Thermo-Hygrometer

1. Sarrera

This manual provides detailed instructions for the setup, operation, and maintenance of your BaldrTherm Solar Photosensitive Three Channel Thermo-Hygrometer. This device is designed to monitor temperature and humidity in up to four locations simultaneously: one indoor main unit and three remote outdoor sensors. It features a solar-powered photosensitive backlight and real-time alerts for environmental changes.

2. Produktuaren osagaiak

The BaldrTherm Thermo-Hygrometer system includes the following components:

• Pantaila-unitate nagusia: For indoor use, displays readings from all sensors and its own indoor environment.
• Three Remote Sensors: For outdoor or additional indoor locations, transmitting data wirelessly to the main unit.
• Argibide eskuliburua: Dokumentu hau.

Image: The main display unit and three remote sensors included in the BaldrTherm Thermo-Hygrometer system.

Main Unit Controls and Display Overview

Familiarize yourself with the buttons and display elements on the main unit for optimal use.

Image: A diagram illustrating the function of each button on the side of the main display unit, including Alert buttons, Channel/Pairing, MAX/MIN, °C/°F, and Auto Backlight.

• ALERT 1, 2, 3 Buttons: Used to set and activate/deactivate temperature/humidity alerts for corresponding channels.
• CH (Kanal) botoia: Switches between displaying individual channels or cycles through them. Also used for pairing mode.
• MAX/MIN botoia: Displays maximum and minimum recorded temperature and humidity values.
• °C/°F botoia: Celsius eta Fahrenheit tenperatura unitateen artean txandakatzen du.
• AUTO botoia: Controls the automatic backlight function.

3. Konfigurazioa

3.1 Bateriaren instalazioa

Batteries are not included. Please prepare 3 AA batteries for the main unit and 2 AA batteries for each remote sensor.

1. Unitate nagusia: Open the battery compartment on the back of the main unit. Insert 3 AA batteries, ensuring correct polarity (+/-). Close the compartment. The unit will automatically enter pairing mode for 7 minutes, and the signal icon will flash slowly.
2. Urruneko sentsoreak: Open the battery compartment on the back of each remote sensor. Insert 2 AA batteries into each sensor, observing correct polarity. Close the compartment.

Image: Step-by-step illustration of inserting batteries into the main unit and a remote sensor, demonstrating the initial setup for pairing.

3.2 Pairing Remote Sensors

The remote sensors will automatically pair with the main unit once their batteries are installed, provided the main unit is in pairing mode (which it enters automatically upon battery insertion). Ensure all sensors are within range of the main unit during initial setup.

• If a sensor does not pair, press and hold the "CH" button on the main unit for 3 seconds to re-enter pairing mode. Then, press the "TX" button inside the battery compartment of the specific remote sensor to force a signal transmission.
• Each remote sensor has a small switch inside its battery compartment to select Channel 1, 2, or 3. Ensure each sensor is set to a unique channel before pairing.

4. Funtzionamendu-argibideak

4.1 Bistaratu informazioa

The main unit's display shows temperature and humidity for the indoor environment (main unit) and up to three remote channels. Each channel's reading is clearly labeled.

Irudia: Xehetasun zehatza view of the main unit's display, indicating Channel 1, Channel 2, Channel 3, Indoor Humidity, and Indoor Temperature readings. It also shows a table with indoor/outdoor temperature ranges and accuracy specifications.

4.2 Tenperatura unitateak aldatzea (°C/°F)

Sakatu ° C / ° F button on the side of the main unit to toggle between Celsius and Fahrenheit temperature displays.

4.3 Viewing MAX/MIN Readings

Sakatu MAX/MIN button to cycle through the maximum and minimum temperature and humidity readings recorded since the last reset. Press again to return to current readings.

4.4 Setting Alerts for Temperature & Humidity

The device can provide instant alerts if temperature or humidity exceeds preset ranges for channels 1, 2, and 3.

• Sakatu dagokion ALERT 1, ALERT 2, or ALERT 3 button to enter alert setting mode for that channel.
• Erabili CH eta MAX/MIN buttons to adjust the high and low alert thresholds for temperature and humidity.
• Sakatu ALERTA button again to confirm and activate the alert. The alert icon will appear on the display.
• When an alert condition is met, the screen will flash, and an audible alarm may sound (if enabled).

Image: The main unit display showing icons for flashing screen alerts for high/low readings and the option to turn alerts on/off for channels 1, 2, and 3.

4.5 Automatic Smart Backlight

The main unit features a photosensitive panel that automatically adjusts the backlight intensity based on ambient light conditions.

• Sakatu AUTO button on the side of the main unit to toggle the automatic backlight function on or off.
• When enabled, the display will be brighter in well-lit environments and dimmer in low-light conditions for improved readability and energy efficiency.

Image: The main unit display illustrating how the backlight auto-adjusts via its PV panel light sensing, showing different brightness levels for day and night.

5. Sensor Placement and Transmission

The remote sensors are designed for both indoor and outdoor use. For optimal performance and range, consider the following:

• Tartea: The system offers a wireless transmission range of up to 330 feet (100 meters) in open air. Walls, metal structures, and other electronic devices may reduce this range.
• Kanpoko kokapena: Place outdoor sensors in a shaded, dry location, protected from direct sunlight and heavy precipitation to ensure accurate readings and prolong battery life. Avoid placing them directly on metal surfaces.
• Barruko kokapena: Place indoor sensors in areas where you wish to monitor specific conditions, such as living rooms, bedrooms, or storage areas.
• Ikusmen lerroa: While not strictly required, a clear line of sight between the main unit and sensors can improve signal strength and reliability.

Image: An illustration demonstrating the BaldrTherm system's ability to monitor four different locations simultaneously, with a transmission distance of up to 330 feet (100 meters).

6. Mantentzea

• Garbiketa: Wipe the main unit and sensors with a soft, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Bateria ordezkatzea: Replace batteries in the main unit and sensors when the low battery indicator appears on the display. Ensure to replace all batteries in a unit at the same time for consistent performance.
• Ingurumena babestea: While remote sensors are weather-resistant, extreme conditions (e.g., prolonged heavy rain, direct intense sunlight, freezing temperatures below specified operating range) can affect performance and lifespan. Position sensors in sheltered locations when possible.

7. Arazoak

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BaldrTherm webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa, berme-erreklamazioetarako.

Fabrikatzailea: BaldrTherm