1. Sarrera
Thank you for choosing the T-SUN Portable LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.
2. Produktua amaitu daview
The T-SUN Portable LED Work Light is designed to provide bright, versatile illumination for various tasks and environments. It features high-efficiency LED beads, adjustable brightness levels, and compatibility with Dewalt 20V batteries. Additionally, it includes integrated USB and Type-C charging ports for powering external devices.
- Distira handia: Up to 5200 Lumens for extensive area coverage.
- Distira bikoitzeko moduak: High (5200 LM, 6-8 hours runtime) and Low (1800 LM, 18-20 hours runtime) for energy conservation.
- Izpi angelu zabala: 120-140° for broad illumination.
- Bateriaren bateragarritasuna: Designed for use with Dewalt 20V batteries (e.g., DCB201, DCB203, DCB204, DCB205, DCB206). Note: Battery not included.
- Kargatzeko ataka bikoitzak: 5V/2.1A USB-A and Type-C outputs for charging phones, tablets, and other electronic devices.
- Eraikuntza iraunkorra: Robust aluminum housing for effective heat dissipation and longevity.
- Buru erregulagarria: The light head can be adjusted to direct illumination precisely where needed.
3. Segurtasun-argibideak
To ensure safe operation, please observe the following:
- Always ensure the work light is detached from the battery when not in use to prevent power drain.
- Do not look directly into the LED light when it is on, as this may cause eye damage.
- Keep the device away from water and moisture to prevent electric shock or damage.
- Do not attempt to disassemble or modify the work light. Repairs should only be performed by qualified personnel.
- Use only compatible Dewalt 20V batteries. Using incompatible batteries may damage the device or cause injury.
- Mantendu haurren eskura.
- Ensure proper ventilation when operating for extended periods to prevent overheating.
4. Paketearen edukia
Egiaztatu elementu guztiak zure paketean daudela:
- 2 x T-SUN Portable LED Work Lights
- 1 x Argibide eskuliburua (dokumentu hau)
5. Konfigurazioa
5.1 Bateria eranstea
- Ensure the work light is switched off.
- Align the grooves on your Dewalt 20V battery with the corresponding slots on the base of the T-SUN work light.
- Slide the battery firmly into place until it clicks, indicating a secure connection.
5.2 Detaching the Battery
- Ensure the work light is switched off.
- Press the battery release button (usually located on the battery itself).
- Slide the battery out of the work light base.
6. Funtzionamendu-argibideak
6.1 Powering On/Off and Adjusting Brightness
- With a compatible Dewalt 20V battery attached, locate the toggle switch on the back of the work light base.
- Slide the switch to position 'I' for Low Brightness (1800 Lumens).
- Slide the switch to position 'II' for High Brightness (5200 Lumens).
- To turn off the light, slide the switch to the center 'O' position.
6.2 Adjusting the Light Head
The LED panel is mounted on an adjustable bracket. Gently pivot the light head forward or backward to direct the beam to your desired area. The head offers a flexible angle of up to 140 degrees.
7. Kanpoko gailuak kargatzea
The T-SUN LED Work Light features a dual charging port for convenience:
- USB-A irteera: 5V/2.1A
- C motako irteera: 5V/2.1A
To charge an external device:
- Ensure a charged Dewalt 20V battery is securely attached to the work light.
- Locate the USB-A and Type-C ports on the side of the battery adapter.
- Connect your device's charging cable to the appropriate port.
- The red indicator light next to the ports will illuminate when power is being supplied.
8. Mantentzea
- Garbiketa: Garbitu lan-argiaren kanpoaldea oihal leun eta lehor batekinamp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Biltegiratzea: Store the work light in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery before long-term storage.
- Ikuskapena: Periodically check for any signs of damage to the housing, LED panel, or battery contacts. Do not use if damaged.
9. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da pizten. | Battery not properly connected or discharged. | Ensure battery is securely attached. Charge or replace the battery. |
| Argiaren irteera apala da. | Low brightness mode selected or battery is low. | Switch to high brightness mode. Charge or replace the battery. |
| External devices not charging. | Battery discharged or cable/device incompatibility. | Ensure battery is charged. Check cable and device compatibility. |
| Argi distira. | Loose battery connection or low battery charge. | Re-seat the battery. Charge or replace the battery. |
10. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | TS-F0120-60-DW |
| Argi-irteera (gehienez) | 5200 lumen |
| Wattage | 52 Watt |
| Kolore Tenperatura | 6000 Kelvin (Zuri Hotza) |
| Beam Angelua | 120-140 gradu |
| Energia iturria | Battery Powered (Compatible with Dewalt 20V batteries) |
| USB irteera | 5V/2.1A (USB-A & Type-C) |
| Materiala | Acrylonitrile Butadiene Styrene (ABS), Aluminum, Glass, Plastic, Polycarbonate (PC) |
| Neurriak (L x W x H) | 4.13" x 3.86" x 5.8" |
| Pisua | Varies with battery attached |
11. Bermea eta Laguntza
The T-SUN Portable LED Work Light comes with a 2 urteko fabrikatzailearen bermea. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims or technical support, please contact T-SUN customer service through the retailer where the product was purchased or visit the official T-SUN webharremanetarako informazioa lortzeko gunea.
