Sarrera
Thank you for choosing the suptek Single Monitor Wall Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.
This wall mount is designed to securely hold a single monitor, freeing up desk space and allowing for ergonomic adjustments to enhance your viewerosotasuna eta produktibitatea handituz.
Segurtasun Informazioa
OHARRA: Improper installation may result in property damage or personal injury. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.
- Ez gainditu 19.8 kg-ko (9 lb) gehienezko karga-ahalmena.
- Ensure the mounting surface (wall) can safely support the combined weight of the mount and the monitor.
- Always use a stud finder to locate wood studs for secure mounting. For concrete or brick walls, use appropriate anchors (included). Do not mount into drywall alone.
- Mantendu haurrak mugikorretatik urrun.
- Egiaztatu konexio guztiak aldizka, seguru daudela ziurtatzeko.
- Produktu hau barrualdean erabiltzeko bakarrik dago pentsatuta.
Paketearen edukia
Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact customer support.
- Monitorearen besoaren muntaketa
- Horma-plaka
- VESA Plaka
- Hardware Kit (screws, washers, spacers, wall anchors)
- Hex giltzak
- Argibide eskuliburua
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | suptek |
| Eredua | B0FHVH6PLY |
| Pantaila-tamaina bateragarria | 17 eta 32 hazbete bitartekoa |
| Pisu Edukiera | 4.4 - 19.8 lb (2 - 9 kg) |
| VESA bateragarritasuna | 75x75mm, 100x100mm |
| Inklinazio angelua | ±80° |
| Angelu birakaria | ±90° |
| Errotazioa | 360° |
| Gehienezko Hedapena | 20.47 hazbete (52 cm) |
| Altuera doitzeko tartea | 12.59 hazbete (32 cm) |
| Materiala | Altzairu aleazioa |
| Kolorea | Zuria |
Image: Compatibility details including VESA 75x75mm and 100x100mm, max load 19.8 lbs, monitor size 13-32 inches, and compatible wall types (Wood Stud, Concrete Wall, Brick Wall).
Konfigurazioa eta Instalazioa
Follow these steps carefully to install your monitor wall mount.
Step 1: Choose Mounting Location and Wall Type
Select a location on your wall that is structurally sound and can support the weight of the mount and your monitor. Use a stud finder to locate a wood stud for optimal security. For concrete or brick walls, ensure you use the appropriate wall anchors provided.
Image: Wall mount installation compatibility with Wood Stud (requires specific method), Concrete Wall, and Brick Wall.
2. urratsa: VESA plaka monitoreari lotu
- Kontu handiz jarri monitorearen aurpegia behera gainazal leun eta garbi batean, marradurak saihesteko.
- Identify the VESA mounting holes on the back of your monitor (75x75mm or 100x100mm).
- Select the correct screws (M4 or M5) and washers from the hardware kit that fit your monitor's VESA holes. If the screws are too long, use the provided spacers.
- Attach the VESA plate to the back of your monitor using the selected screws and washers. Do not overtighten.
3. urratsa: Hormako plaka horman muntatu
- Hold the wall plate against the wall at your desired mounting height. Use a level to ensure it is straight.
- Markatu zulaketa-lekuak hormako plakaren zuloen bidez.
- Egurrezko habeetarako: Drill pilot holes (recommended size in manual) into the center of the stud. Secure the wall plate using the lag bolts provided.
- Hormigoizko/Adreiluzko Hormetarako: Drill pilot holes (recommended size in manual) and insert the plastic wall anchors. Then secure the wall plate using the lag bolts.
- Ziurtatu hormako plaka ondo eta ondo finkatuta dagoela horman.
Step 4: Attach Monitor Arm to Wall Plate
Slide the monitor arm assembly onto the wall plate. Ensure it clicks securely into place. There may be a locking screw or mechanism to further secure it; refer to the detailed diagram in the included printed manual.
Step 5: Attach Monitor to Arm
Carefully slide the monitor (with the attached VESA plate) onto the VESA head of the monitor arm. Secure it with the locking screw or mechanism, typically located on the top or side of the VESA head.
Image: Fully installed suptek Single Monitor Wall Mount with a monitor attached.
Funtzionamendu-argibideak
Gas malgukiaren tentsioa doitzea
The gas spring mechanism allows for smooth height adjustment. The tension needs to be adjusted to match your monitor's weight for optimal performance. Use the provided hex key to adjust the tension screw located on the arm.
- Turn Clockwise (+): For lighter monitors, to increase tension and prevent the monitor from dropping.
- Turn Counter-Clockwise (-): For heavier monitors, to decrease tension and allow the monitor to move down easily.
Adjust until the monitor stays at any desired height when released.
Image: Gas spring tension adjustment points and directions for lighter/heavier monitors.
Full Motion Adjustments
The monitor arm offers a wide range of motion for ergonomic positioning:
- okertu: Adjust the monitor screen ±80° up or down to reduce glare and optimize viewangeluak.
- Birakaria: Rotate the monitor ±90° left or right to share your screen or change viewnorabidea.
- Errotazioa: Biratu monitorearen pantaila 360° horizontaletik bertikalera.
- Luzapena/Atzerapena: The arm extends up to 20.47 inches (52 cm) and retracts to save space.
- Altuera doitzea: The gas spring allows for smooth vertical movement within a 12.59-inch (32 cm) range.
Image: Full motion capabilities including tilt, swivel, and 360° rotation.
Image: Arm extension and retraction, showing a maximum extension of 20.47 inches.
Image: Height adjustment range of 12.59 inches for eye-level comfort.
Kableen kudeaketa
The monitor arm features integrated cable management clips or channels to keep your cables organized and out of sight. Route your monitor's power and video cables through these channels for a clean and tidy workspace.
Mantentzea
- Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estututa eta ondo finkatuta daudela ziurtatzeko.
- Garbitu euskarria zapi leun batekin,amp oihal. Saihestu garbitzaile edo disolbatzaile urratzaileak.
- Ez saiatu gas malguki mekanismoa desmuntatzen.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Beherapenak edo jaitsierak kontrolatu | Gas malgukiaren tentsioa baxuegia da monitorearen pisurako. | Increase gas spring tension by turning the adjustment screw clockwise. |
| Monitor is difficult to push down or stays too high | Gas malgukiaren tentsioa altuegia da monitorearen pisurako. | Decrease gas spring tension by turning the adjustment screw counter-clockwise. |
| Mendia ezegonkorra sentitzen da | Wall plate not securely fastened; screws loose. | Re-check all mounting screws on the wall plate and tighten them. Ensure proper wall type and anchors were used. |
| Monitor does not fit VESA plate | VESA eredua edo torlojuaren tamaina okerra. | Verify your monitor's VESA pattern (75x75mm or 100x100mm). Ensure you are using the correct M4 or M5 screws and spacers. |
Bermea eta Laguntza
For warranty information or technical support, please refer to the warranty card included with your product or visit the official suptek website. If you have any questions or require assistance, do not hesitate to contact suptek customer service.
Harremanetarako informazioa: Please refer to the packaging or suptek's official webwebgunea, harremanetarako datu eguneratuenak lortzeko.