ILM 159BT Bluetooth kasko modularraren erabiltzailearen eskuliburua

1. Sarrera

This manual provides essential information for the proper use, setup, and maintenance of your ILM 159BT Bluetooth Modular Motorcycle Helmet. Please read this manual thoroughly before using the helmet to ensure your safety and optimize your riding experience. The ILM 159BT helmet features a modular design, integrated Bluetooth communication, and a dual visor system.

2. Segurtasun informazioa

Your safety is paramount. This helmet is designed to provide protection during motorcycle riding. Adhere to the following safety guidelines:

• DOT Ziurtagiria: This helmet complies with FMVSS 218 and DOT safety standards. Always ensure the helmet is properly fastened before riding.
• Egokitze egokia: A helmet must fit snugly to provide effective protection. Refer to the sizing guide in Section 4.1.
• Visor Use: Always use the clear outer visor for optimal visibility, especially at night. The inner sun visor is for daytime use only to reduce glare.
• Mantentzea: Do not modify the helmet structure or use harsh chemicals for cleaning, as this can compromise its protective capabilities.
• Eragina: If the helmet sustains an impact, even if no visible damage is present, it should be replaced immediately.

3. Produktua amaitu daview

The ILM 159BT helmet integrates several features for comfort, safety, and communication.

Figure 3.1: Key components of the ILM 159BT helmet.

3.1. Helmet Structure

• Diseinu modularra: The helmet features a flip-up front section, allowing conversion between full-face and open-face styles.
• Bisera bikoitzeko sistema: Includes a clear outer visor (Pinlock30-ready) and an integrated retractable inner sun visor.
• Aireztapen-sistema: Multiple adjustable air vents are located at the mouth, top, and rear for airflow.
• Comfort Liner: Removable and washable sweat-absorbing liner for hygiene and comfort.

3.2. Integrated Bluetooth System

The helmet is equipped with an integrated Bluetooth 5.0 system for communication and audio playback.

• Funtzioak: Supports intercom communication (2-3 riders), phone calls, and music playback.
• Bateriaren iraupena: Gehienez 14 orduko hitzaldia.
• Kontrolak: An external control knob on the side of the helmet manages Bluetooth functions.

4. Konfigurazioa

4.1. Kaskoa egokitzea

A correctly sized helmet is crucial for safety. Measure your head circumference as shown in the diagram below.

Figure 4.1: Head measurement guide and size chart.

Neurtzeko jarraibideak:

1. Place a measuring tape approximately 1 inch (2.5 cm) above your eyebrows.
2. Wrap the tape around your head, just above your ears and around the widest part of the back of your head.
3. Refer to the size chart to find your corresponding helmet size. If your measurement falls between two sizes, choose the larger size for comfort, or the smaller size for a tighter fit, depending on preference.

Oharra: The helmet sizing may run slightly small. It is recommended to try on the helmet to ensure a secure and comfortable fit.

4.2. Bluetooth parekatzea

The helmet's Bluetooth system allows connection to your mobile device and other compatible helmets.

Figure 4.2: Bluetooth communication features.

Gailu mugikor batekin parekatzea:

1. Ensure the helmet's Bluetooth unit is charged.
2. Press and hold the power button on the Bluetooth control unit until the indicator light flashes, indicating pairing mode.
3. Zure gailu mugikorrean, joan Bluetooth ezarpenetara eta bilatu eskuragarri dauden gailuak.
4. Select "ILM 159BT" (or similar name) from the list to connect.
5. Behin konektatuta, adierazle-argia aldatuko da eta baieztapen-tonu bat entzungo duzu.

Intercom Pairing (2-3 Riders):

1. Ensure both helmets are powered on and in pairing mode (refer to individual helmet instructions for specific intercom pairing steps).
2. Initiate intercom pairing from one helmet's control unit.
3. Follow the voice prompts or indicator lights to confirm successful connection between helmets.

5. Funtzionamendu-argibideak

5.1. Modular Function

The modular design allows you to switch between full-face and open-face configurations.

Figure 5.1: Modular and Full Face helmet styles.

To open the modular front, locate the release button (usually near the chin bar) and press it while lifting the chin bar upwards until it locks into the open position. To close, press the release button again and pull the chin bar down until it securely latches.

5.2. Biseraren funtzionamendua

Kaskoak bisera bikoitzeko sistema dauka argi-baldintza desberdinetarako.

Figure 5.2: HD Dual Visor system.

• Kanpoko bisera: The clear outer visor can be raised or lowered manually. It is Pinlock30 compatible for anti-fog functionality (Pinlock insert not included).
• Barneko eguzki-bisera: To deploy the inner sun visor, use the switch located on the side of the helmet (refer to Figure 3.1). Push the switch forward to lower the visor and backward to retract it.

5.3. Aireztapen sistema

Adjust the multiple air vents to control airflow and maintain comfort.

Figure 5.3: Efficient Ventilation system.

• Ahoko aireztapena: Slide the lever on the chin bar to open or close the vent.
• Goiko airea: Slide the switch on the top of the helmet to open or close the vent.
• Atzeko aireztapena: These vents are typically passive exhaust vents, working in conjunction with the front vents to draw air through the helmet.

5.4. Bluetooth kontrolak

The Bluetooth control unit on the side of the helmet manages all communication and audio functions.

• Piztu/Itzali: Sakatu eta eutsi botoiari 3 segundo inguru.
• Bolumenaren doikuntza: Rotate the control knob clockwise to increase volume, counter-clockwise to decrease.
• Musika erreproduzitu / pausatu: Sakatu labur botoi nagusia.
• Deia erantzun/amaitu: Short press the main button during an incoming call or an active call.
• Intercom Activation: Consult the specific Bluetooth unit's manual for detailed intercom activation and switching between riders.

6. Mantentzea

Regular maintenance ensures the longevity and effectiveness of your helmet.

6.1. Cleaning the Helmet Exterior

• Erabili zapi leun bat eta xaboi leun bat ur epelarekin.
• Avoid abrasive cleaners, solvents, or petroleum-based products, as these can damage the helmet's shell and finish.
• Wipe gently and dry with a clean, soft cloth.

6.2. Bisera garbitzea

• Remove the outer visor for thorough cleaning.
• Use a soft cloth and clean water. For stubborn dirt, use a specialized helmet visor cleaner.
• Do not use paper towels or rough cloths, as they can scratch the visor surface.

6.3. Removable Liner Care

The helmet features a removable and washable liner for hygiene.

Figure 6.1: Removable comfort liner.

1. Carefully detach the liner components from the helmet interior.
2. Hand wash the liner with mild soap and cold water.
3. Allow the liner to air dry completely before reinserting it into the helmet. Do not machine wash or tumble dry.

6.4. Bluetooth Unit Charging

The Bluetooth unit is powered by a rechargeable Lithium Ion battery.

• Locate the charging port on the Bluetooth unit (typically micro-USB).
• Connect the provided charging cable to a compatible USB power source.
• Charge the unit fully before first use and whenever the battery is low.

7. Arazoak

Atal honetan ohiko arazoen irtenbideak aurkituko dituzu.

8. Zehaztapenak

9. Bermea eta Laguntza

Bermeari buruzko informazioa eta bezeroarentzako laguntza lortzeko, kontsultatu erosketarekin batera datorren dokumentazioa edo bisitatu ILM ofiziala. webgunea. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.