VEVOR 3L Ultrasonic Cleaner User Manual

Sarrera

This manual provides essential instructions for the safe and efficient operation of your VEVOR 3L Ultrasonic Cleaner. This device is designed for deep cleaning various items such as jewelry, glasses, watches, circuit boards, and small parts using ultrasonic technology and a heated function. Please read this manual thoroughly before first use and retain it for future reference.

Image: The VEVOR 3L Ultrasonic Cleaner, showcasinbere diseinu trinkoa eta kontrol-panel digitala ditu.

Segurtasun-argibideak

To prevent injury or damage to the unit, always adhere to the following safety precautions:

• Segurtasun elektrikoa: Ensure the unit is connected to a grounded outlet. Do not disassemble the unit except for authorized personnel. Avoid touching the power cord with wet hands to reduce the risk of electric shock.
• Ur maila: Do not operate the unit without sufficient water in the tank. The water level should always be above the minimum fill line and below the maximum fill line.
• Heat and Overheating: The unit generates heat. Ensure adequate ventilation around the unit during operation. Do not block ventilation openings.
• Kimikoak: Use only cleaning solutions recommended for ultrasonic cleaners. Avoid flammable, corrosive, or abrasive cleaning agents.
• Haurrak eta maskotak: Mantendu unitatea haurren eta maskoten eskura urrun.
• Unitate Kaltetua: Do not operate the unit if it is damaged or malfunctioning. Contact customer support for assistance.

Produktuaren osagaiak

The VEVOR 3L Ultrasonic Cleaner package includes the following items:

• 1 x Ultrasonic Cleaner Unit
• 1 x Garbiketa Saskia
• 1 x kablea
• 1 x Erabiltzailearen eskuliburua (dokumentu hau)

Image: Key accessories including the stainless steel tank, cleaning basket, and integrated carry handle.

Konfigurazioa

1. Despaketatzea: Carefully remove all components from the packaging. Inspect the unit for any signs of damage.
2. Lekua: Place the ultrasonic cleaner on a stable, flat, and dry surface. Ensure there is adequate space around the unit for ventilation.
3. Potentzia-konexioa: Connect the power cord to the unit and then to a grounded electrical outlet.
4. Bete depositua: Open the lid and fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
5. Saskia sartu: Jarri garbiketa-saskia deposituan.

Image: The ultrasonic cleaner with its lid removed, revealing the stainless steel cleaning tank.

Funtzionamendu-argibideak

The VEVOR 3L Ultrasonic Cleaner features a digital control panel for precise time and temperature settings.

Irudia: Xehetasun handikoa view of the digital control panel, highlighting temperature and time controls.

1. Elementuak kargatu: Place the items to be cleaned into the cleaning basket. Ensure items are fully submerged in the cleaning solution but do not touch the bottom of the tank directly. Avoid overcrowding the basket.
2. Ezarri tenperatura (aukerakoa): Press the "TEMP+" or "TEMP-" buttons to adjust the desired cleaning temperature. The temperature can be set from room temperature up to 176°F (80°C). Press the "Heating ON/OFF" button to start or stop the heating function.
3. Garbiketa ordua ezarri: Press the "TIME+" or "TIME-" buttons to set the desired cleaning duration. The timer can be set from 0 to 30 minutes.
4. Hasi garbitzen: Press the "Ultrasonic ON/OFF" button to begin the ultrasonic cleaning process. The unit will start generating ultrasonic waves.
5. Jarraitu aurrerapena: The digital display will show the remaining cleaning time and the actual temperature.
6. Ziklo amaiera: Once the set time expires, the ultrasonic function will automatically stop. You can manually stop the process at any time by pressing the "Ultrasonic ON/OFF" button again.
7. Elementuak kendu: Carefully remove the cleaning basket from the tank. Rinse the cleaned items with clean water and dry them thoroughly.

Mantentzea

Mantentze-lan erregularrak zure ultrasoinu-garbigailuaren iraupena eta errendimendu optimoa bermatzen ditu.

• Depositua hustutzea: After each use, especially if using specialized cleaning solutions, drain the tank. Use the drain valve if available, or carefully pour out the liquid.
• Depositua garbitzea: Wipe the inside of the stainless steel tank with a soft cloth. Do not use abrasive cleaners or scouring pads, as these can damage the tank surface.
• Kanpoko garbiketa: Garbitu unitatearen kanpoaldea iragarkiarekinamp oihal bat. Saihestu ura kontrol-panelean edo osagai elektrikoetan sartzea.
• Biltegiratzea: Gorde unitatea leku fresko eta lehor batean erabiltzen ez duzunean. Ziurtatu depositua hutsik eta lehor dagoela gorde aurretik.
• Fusiblearen ordezkapena: The unit includes a spare fuse. If the unit fails to power on, check and replace the fuse located at the back of the unit if necessary. Always unplug the unit before attempting fuse replacement.

Arazoak konpontzea

Ikusi hurrengo taula arazo ohikoenak eta haien irtenbideak ikusteko:

Zehaztapenak

• Marka: ZABALTZA
• Modelo zenbakia: TH-20A
• Edukiera: 3 L (Gehienez 2.85 L, Uraren mailaren edukiera 2.05 L)
• Ultrasoinu potentzia: 120W
• Berokuntza-potentzia: 150W
• Maiztasuna: 40 kHz
• Materiala: 304 Altzairu herdoilgaitzezko depositua
• Produktuaren neurriak: 10.43 x 6.5 x 8.86 hazbete (265 x 165 x 225 mm)
• Produktuaren pisua: 6.83 lb (3.1 kg)
• UPC: 197988365518

Image: Visual representation of the cleaner's core specifications: 40kHz frequency, 150W heating power, and 120W ultrasonic power.

Image: Detailed dimensions of the ultrasonic cleaner unit and its cleaning basket.

Bermea eta Laguntza

VEVOR products typically come with a one-year warranty. For warranty claims, technical support, or any questions regarding your VEVOR 3L Ultrasonic Cleaner, please contact VEVOR customer service. Refer to the official VEVOR website or your purchase documentation for specific contact information.

Lineako laguntza: www.vevor.com