DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Segurtasun informazioa

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Erabili beti segurtasun-betaurrekoak edo segurtasun-betaurrekoak alboko babesarekin eta, behar izanez gero, aurpegi osoa produktua erabiltzen duzunean.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Produktua amaitu daview

Paketearen edukia

• Haririk gabeko Brad iltzagailua
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0Ah Li-ioi Bateria
• Ordubeteko kargagailu azkarra
• Eramateko zorroa
• Argibide eskuliburua

Erremintaren osagaiak

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Neurriak eta Pisua

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Luzera: 10.83 hazbete (27.5 cm)
• Zabalera: 9.45 hazbete (24 cm)
• Weight: 6.19 lbs (without battery)

3. Konfigurazioa

Bateriaren instalazioa

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Lerrokatu bateria tresnaren bateriaren zirrikituarekin.
3. Irristatu bateria zirrikituan, ondo lotu arte klik egin arte.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Sakatu askatzeko botoia eta atera aldizkariaren azala.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Itxi aldizkariaren azala askatzeko botoiarekin bat egin arte.

Iltzea Viewer Leihoa

Iltzea viewer window allows you to quickly check the fastener level. When the window shows gorria, it indicates the magazine is without nails. When it shows beltza, it indicates the magazine contains nails.

4. Funtzionamendu-argibideak

Tiro moduak

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Tiro bakarreko modua

• Shift the mode switch to the ezkerreko aldean (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Harremanetarako Tiro modua

• Shift the mode switch to the eskuineko aldean (contact firing icon).
• Sakatu gatilloa.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Oharra: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Sakonera doitzea

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED Argiztapena

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED adierazlea

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Gorria piztuta: Bateria baxua.
• Distira gorria: Nails/staples are jammed.
• Berdea piztuta: No nails/staples in the magazine.
• Berde keinuka: Gehiegi berotu.
• Argia itzalita: Funtzionamendu egoera normala.

Produktuaren bideo ofiziala

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Mantentzea

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Bateria zaintzea

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Gorde bateria leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturatik urrun.

6. Arazoak

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Zehaztapenak

Lotura bateragarriak

Figure 9: Compatible nail and staple types.

8. Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.