EOEOTWO 26" Fat Tire Electric Bike Model E01 User Manual

1. Sarrera

Thank you for choosing the EOEOTWO 26" Fat Tire Electric Bike, Model E01. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your electric bicycle. Please read this manual thoroughly before your first ride and keep it for future reference.

2. Segurtasun Jarraibideak

Always prioritize safety when operating your electric bike. Failure to follow these guidelines may result in serious injury or damage to the bicycle.

• Uneoro kaskoa eta segurtasun-ekipo egokia eraman.
• Ezagutu tokiko trafiko lege eta araudiak.
• Perform a pre-ride inspection before each use, checking brakes, tires, battery, and all fasteners.
• Ez ibili alkoholaren edo drogen eraginpean.
• Saihestu eguraldi txarra dagoenean edo gainazal irristakorretan ibiltzea.
• Ziurtatu bateria ondo blokeatuta dagoela ibili aurretik.
• Do not modify the electrical system or motor.

3. Muntaketa eta Konfigurazioa

The EOEOTWO E01 electric bike requires some assembly. Follow these steps carefully. It is recommended to have two people for unboxing and initial assembly.

3.1. Kutxatik ateratzea eta osagaien identifikazioa

Carefully open the packaging box and remove the bicycle. Identify all components and accessories. Refer to the video for visual guidance.

Image: The EOEOTWO 26 inch Fat Tire Electric Bike, Model E01, in yellow, fully assembled.

3.2. Eskulekuaren instalazioa

1. Loosen the four screws from the bicycle stem.
2. Place the handlebar into the stem and adjust the angle of the stem to ensure the handlebar is level.
3. Estutu lau torlojuak ondo.

3.3. Aurreko gurpilaren instalazioa

1. Remove the protective cover from the axle and unscrew the nuts on both sides of the axle.
2. Insert the front wheel into the fork, ensuring the screws on both sides of the axle are engaged in the slots.
3. Tighten the nuts on both sides of the axle.

3.4. Pedalen instalazioa

1. Identifikatu ezkerreko (L) eta eskuineko (R) pedalak.
2. Insert the pedals into the corresponding circular slots on the crank arms.
3. Secure them with a wrench, ensuring they are tightly fastened.

3.5. Fender and Rear Rack Installation

1. Connect the rear fender to its connecting accessories using screws.
2. Move the fender above the rear wheel and align the hole at the connection with the hole on the rear frame.
3. Thread the screw into the hole at the connection and tighten it with a wrench.
4. Repeat similar steps for the front fender, aligning it with the holes on the front frame and headlight, and securing it with screws.

3.6. Bateria instalatzea eta kargatzea

1. The key is used to lock and unlock the battery. The battery can be removed after unlocking.
2. Plug in the charger to charge the battery. The light turns from green to red, indicating the start of charging.
3. After fully charging, place the battery back into the slot and lock it securely.

3.7. Protective Film Removal

Tear off the protective films from the LCD display and gear shifter for clear visibility.

3.8. Eserlekuaren doikuntza

Adjust the seat to the appropriate height for comfortable riding and lock it securely.

4. Funtzionamendu-argibideak

4.1. Erakutsi baino gehiagoview

Image: The EOEOTWO E01 LCD display, showing battery level, current speed, pedal assist level, trip mileage, odometer, maximum speed, and average speed.

LCD pantailak zure bidaiari buruzko informazioa denbora errealean ematen du:

• Bateria maila: Bateria karga geratzen dela adierazten du.
• Abiadura: Uneko bizikleta-abiadura.
• PAS (Pedalen Laguntza Sistema) Maila: Motorraren laguntzaren uneko maila erakusten du.
• BIDAIA: Distance traveled on the current trip.
• ODO: Total odometer reading.
• MAX: Gehienezko abiadura lortu da.
• Batez bestekoa: Batez besteko abiadura.

4.2. Speed Gears

Image: Close-up of the 7-speed gear shifter and the rear derailleur system on the EOEOTWO E01.

The E01 features a 7-speed gear system. Use the gear shifter on the handlebar to change gears according to terrain and desired effort. The plus (+) button increases gears, and the minus (-) button decreases gears.

4.3. Ibiltzeko moduak

Your EOEOTWO E01 electric bike offers five distinct riding modes:

1. Throttle modua: Power is obtained by rotating the throttle without using foot pedals. This mode allows for speeds up to 33 MPH.
2. Pedalaren laguntza modua: Provides electric assistance when using the foot pedals. There is no response when simply turning the throttle in this mode. This mode offers assistance up to 30 MPH.
3. Bizikleta modu arrunta: Functions like a regular bicycle, ridden solely with pedals and utilizing the 7-speed gears.
4. Booster modua: Press the button on the right control panel to activate this mode. It allows the ebike to travel at approximately 2 miles/h, making it easy to push uphill or walk alongside.
5. Gurutzaldi modua: To activate, turn the throttle to the bottom and hold it for about 12 seconds. Release the throttle, and the ebike will maintain that speed.

Image: Visual representation of the five riding modes available on the EOEOTWO E01 electric bike.

5. Mantentzea

Regular maintenance ensures the longevity and safe operation of your EOEOTWO E01 electric bike.

5.1. Bateria zaintzea

• Charge the battery fully after each ride.
• Saihestu bateria guztiz hustea.
• Store the battery in a cool, dry place when not in use, and charge it periodically if stored for extended periods.
• Erabili emandako kargagailua soilik.

5.2. Tire Maintenance

Image: Close-up of the EOEOTWO E01's fat tires, highlighting their robust design and the dual disc brakes.

• Check tire pressure before each ride. Maintain pressure within the recommended range (typically indicated on the tire sidewall).
• Aztertu pneumatikoak higadura, ebaki edo objektu txertatuen bila.

5.3. Balazta Sistema

• Regularly check brake levers for proper tension and responsiveness.
• Inspect brake pads for wear and replace them when necessary.
• Ensure brake cables are free from kinks or damage.

5.4. Katea eta transmisioa

• Martxa-aldaketa leunak bermatzeko eta herdoila saihesteko, mantendu katea garbi eta lubrifikatuta.
• Check for any loose or damaged chain links.

5.5. Garbiketa orokorra

Clean your ebike regularly with a damp oihal. Saihestu presio handiko ur-zorrotadak zuzenean osagai elektrikoetan erabiltzea.

6. Arazoak

This section addresses common issues you might encounter with your EOEOTWO E01 electric bike.

Hemen zerrendatzen ez diren arazorik baduzu edo proposatutako irtenbideek arazoa konpontzen ez badute, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.

7. Zehaztapenak

8. Bermea

The EOEOTWO 26" Fat Tire Electric Bike Model E01 comes with a 1 urteko berme mugatua. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. The product meets strict U.S. safety standards.

Bermearen baldintza zehatzak ikusteko, kontsultatu produktuarekin batera datorren berme-txartela edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.

9. Bezeroarentzako arreta

If you have any questions, require assistance with assembly, operation, maintenance, or troubleshooting, please contact EOEOTWO customer support. You can typically find contact information on the product packaging, the official EOEOTWO webgunea, edo zure dendariaren bidez.

Please have your model number (E01) and purchase date ready when contacting support.